Even more work to Vteckidd's CRX

[Formally...]

As some know Mike got another rex to get some parts off of. Those parts included a set of S2 Pro 1 cams and S2 valvetrain. Also a S2 intake manifold and TB. We also threw in some bigger injectors since he was maxed out on the stock ones.

Before
http://i250.photobucket.com/albums/gg250/mainstreamperf/picture22559-1.jpg

Valve springs and retainers going in...
http://i250.photobucket.com/albums/gg250/mainstreamperf/picture22560-1.jpg

Old intake and cams out...
http://i250.photobucket.com/albums/gg250/mainstreamperf/picture22566.jpg

Setting up the degree wheel to degree in the new cams
http://i250.photobucket.com/albums/gg250/mainstreamperf/picture22576.jpg

Finding TDC of #1
http://i250.photobucket.com/albums/gg250/mainstreamperf/picture22575.jpg

Setting the intake cam
http://i250.photobucket.com/albums/gg250/mainstreamperf/picture22577.jpg

Setting the exhaust cam
http://i250.photobucket.com/albums/gg250/mainstreamperf/picture22580.jpg

All done waiting for the dyno....
http://i250.photobucket.com/albums/gg250/mainstreamperf/picture22583.jpg

[Cameron.]

cleannnnnn. how much are you expecting?

[EmminoDaGreat]

bout 350

[Cameron.]

tree fiddy! naw wai man.

[KevinT707]

tree fiddy! naw wai man.
si wai man! tree fiddy is the always da magic numba mon

[EmminoDaGreat]

he said something about whooping your ass kevin, i dunno but i'd check with him..

[Revmaynard]

si wai man! tree fiddy is the always da magic numba mon


What ever happened with your car? I heard about it catching fire, and I never saw it at IA. Is everything all good with it?

[batlbrandon]

What compression ratio is that motor?

[EmminoDaGreat]

What compression ratio is that motor?
stock type r compression


11:1 ?

[batlbrandon]

Not expecting to break Mike's old "record" then? More for fun and civility?

[EJ_Allmota]

yessir!!! should cross 200whp now right..

[bobbyg313]

cool

ive always wanted to learn how to degree an engine.

[EviLLFocI]

I take it ur running all motor?

[Vteckidd]

Not expecting to break Mike's old "record" then? More for fun and civility?
Nah been there done that, have no desire to go back. I had more fun with stock or OEM motors anyway. I dont care to be the fastest anymore or make the most power, i just want something that is fun and hassle free. I want to jump in it and take it down the block and have it put a smile on my face.

Heres the new graph, about what i expected. After all its a UNTOUCHED STOCK ITR block and head. When i dynoed it last it made 196whp which is INSANE for a stock R motor with just a header. After adding all the cams, intake manifold, springs ,ret etc i didnt get my hopes up because there is only so much you can do with a 10.5:1 compression 1.8L.

Pretty much what i accomplished was now i can safely rev to 9500 with the PRO valvetrain. The PRO1 cams extended my powerband out about 500-600RPMs and made 3-5whp up there, and i picked up some midrange gains.

Plus IF i ever do decide to go bigger, i have everything i need to make big power.

Tuned by Scotty
http://i24.photobucket.com/albums/c21/Vteckidd/KiddPRO1.jpg

[NAIZBST]

not too shabby

[Formally...]

May have to do a little better exhaust now and wait for a little dryer day. With all the rain the humitity was insane and everyone knows motors down run on water. I say 205-208 with a cooler dryer day and new exhaust. Still very impressinve for a stock internal motor.

[slow_hatch]

Kickass :goodjob: Congrats Mike, looks like a fun car. What trans are you running??

[Vteckidd]

The exhaust is so quiet!!! :p

[DarKStaR]

I would have figured a little more but if it was humid and hot, that plays a big part. Why didnt you rev it out on that dyno chart? Unless....:ninja:

[Vteckidd]

Torq and power was falling way off after 8600 no reason to run it to 9500 unless I'm At the track.

I think the power is good and it feels 10000 times stronger actually which was surpising, lookin at the graph I didn't think I would feel a difference. Throttle response is very nice.

Considering I've seen 2.0l with way more compression and
mods not make this power, can't ask for anything more

[jerseyef9]

i seen that car personally last nite
it looks amazing man

[D3UC3S]

Good shit mike!!! Glad you got over 200

[PawnShopCEO]

very nice congrats

[Atlblkz06]

Wow thats pretty lean for a stock(?) tune!

Awesome power though. Always wanted a B18C5 in a lightweight car!

[Vteckidd]

13.5 is about right on an na motor Honda that is. Prob could run it a little richer but it made the most power there

[WTF?]

nice power and is the interior in the rex striped or is it still full interior?

[PawnShopCEO]

full interior

[batlbrandon]

Nice! 200 whp 1.8 is good stuff. I know I'm gonna get flamed for this but why is the CF in STD? I wonder what it will make when the air is cooler. what intake are you running? Any thoughts about ITB's?

[Vteckidd]

We always used STD prob to make us na guys feel better (tht extra 1-3 hp helps the ego lol)

intake is 3 in custom charles made, I think the motor is tapped power wise. Itbs might give me some midrange but I'd rather spend the $2000 on a 2.0l bottom end than jenveys ( only itbs i would buy)

[dELfONiK]

Nice!

[speedminded]

What flywheel/clutch? I have a Cusco 8.7 lb. one piece chromoly I'll let go cheap!

[EJ_Allmota]

yessir, good stuff.. maybe i will be close to whp like that soon.. :ninja:

[NevrNufTorq]

mike's gone n/a crazy again!!!! :D

[boosted_nonv]

good stuff Mike

[Da_unknown]

mike's gone n/a crazy again!!!! :Dhahah.. lets hope not dave... good stuff bro :goodjob:

[*DA Boo*]

nice numbers for a stock block!

[bluescreamer]

Like to see it run down the track with some slicks

[Black R]

Torq and power was falling way off after 8600 no reason to run it to 9500 unless I'm At the track.

I think the power is good and it feels 10000 times stronger actually which was surpising, lookin at the graph I didn't think I would feel a difference. Throttle response is very nice.

Considering I've seen 2.0l with way more compression and
mods not make this power, can't ask for anything more


when you're racing, i'd shift around 9200 so you'll be higher in the powerband. I love your graph. had i done such a smart build, I probably would have saved thousands of dollars! :( Anyway, I'd vote for 9500rpm when you need it. :)

cheers to the 200whp club! just show me the SAE #'s!

[MachNU]

now all you have to do is fix that 20 foot issue! :D

[Nashville]

good shit mainstream, hear nothing but good from you guys, maybe if you put a better header on there it would make more power. just my .02

[integ34]

nice.

real close to my old set-up.

[greasemunkey]

I bet that thing is begging for traction!

[Vteckidd]

good shit mainstream, hear nothing but good from you guys, maybe if you put a better header on there it would make more power. just my .02
lol

Considering no header has beaten my B Series yet, im pretty sure im happy with what i got.

Plus, why spend $1000-1200 for a better header when mine is making over 200whp with a stock bottom end.

Bring me another ITR in GA that makes that much power :P

[Truegiant]

haha at the comment one guy made about you being in the 200whp club. you hit that like back when return of the jedi came out. haha.

[Vteckidd]

haha thats Ken, we been friends a long time. I think he meant welcome to the 1.8l 200WHP club. We were all trying to get to that number years ago and spent all this money doing cams and built motors and none of us ever got there. Looks like i did this time around, and all i needed was a virgin ITR motor to do it.

[PawnShopCEO]

haha thats Ken, we been friends a long time. I think he meant welcome to the 1.8l 200WHP club. We were all trying to get to that number years ago and spent all this money doing cams and built motors and none of us ever got there. Looks like i did this time around, and all i needed was a virgin ITR motor to do it.


virgins are always fun

[1SICKLEX]

I don't get it.....

[PawnShopCEO]

"and all i needed was a virgin ITR motor to do it."

[Formally...]

I don't get it.....

I guess that make you the virgin then.....

[PawnShopCEO]

I guess that make you the virgin then.....
lolz

[BABY J]

Fuck Mike. I hate him. :)

[Black R]

haha at the comment one guy made about you being in the 200whp club. you hit that like back when return of the jedi came out. haha.


haha ya, but with stock head and stock bottom end? :tongue1:

[Truegiant]

DYLAN DYLAN DYLAN DYLAN....>> DYLAN..

haha

Def. a nice setup. How much do you have in the whole setup?

[Vteckidd]

More than I wanted haha

between all the swapping, labor, selling other parts etc prob around $5000. If I didn't get a good deal on the second car prob closer to $7000

I sold the b16 that was in it, made money off the second donor crx blahblahblah

[batlbrandon]

We always used STD prob to make us na guys feel better (tht extra 1-3 hp helps the ego lol)

intake is 3 in custom charles made, I think the motor is tapped power wise. Itbs might give me some midrange but I'd rather spend the $2000 on a 2.0l bottom end than jenveys ( only itbs i would buy)


right on. looks good man. keep it up.

[speedminded]

haha ya, but with stock head and stock bottom end? :tongue1:Still driving the ITR?