B18

[hmong_Spec]

how do you gain hp and tq from a ls? B18B1. nonvtec or boost or spray.

[jerseyef9]

i was told you can build the head

[hmong_Spec]

more details?


i was told you can build the head

[jerseyef9]

get the port and polish, valve job, bigger cams

[hmong_Spec]

any more info on the valve job? also, wat you mean by port and polish.also, will Gsr cams and B16 cams fit?


get the port and polish, valve job, bigger cams

[jerseyef9]

all this work is mostly done a machine shop
those are vtec cam
you need non vtec cam
crower make great cam for your motor

[southside]

any more info on the valve job? also, wat you mean by port and polish.also, will Gsr cams and B16 cams fit?Nope gsr cams or b16 cams wont work.and valve job you can take it to any machine shop and get a 3angle valve job.Its when they cut the valve seats to increase smoother air flow.Alot of people on here will tell you dont waste your time but check out nonvtec.com they are ls enthuasiat and have alot of info about how to get power out of them which cams to use and other jubaloop.:goodjob:
3angle valve job
http://www.team-integra.net/images/BAEC1978-D3A7-4405-AB2D-2761DC15A96D/articles/tuan/anglevalves03.jpg