1jz cressida update

[Riceboy891]

As of now just about everything is complete except for the wiring harness and exhaust. All i can say is thank god for driftmotion.com, i wish i would have known about them before i started the build.

So far:

1JZGTE
A340e tranny
Intercooler setup
driftmotion steel braided ps pressure line
driftmotion 2jz throttle cable
driftmotion stainless 3" downpipe
walbro 255 fuel pump
driftmotion bellhousing bolt kit
flex-a-lite trans cooler
Derale dual 13" 4000cfm fans w/ adj. controller
full 3" exhaust from summit w/ magnaflow muffler & hiflo cat
KYB GR2 shocks
S14 Springs

probably a few other things i forgot

Enjoy!

[yerrow]

awesome!!!

[EX-Svic]

:goodjob: nice work seems to be coming along well :cheers:

[JITB]

car looks happy

[Riceboy891]

happy as in gay?:(

[bigpanda16]

sweet build bro, good luck with finishing the swap.
ur going to be hurtin for a w58 or r154 like right after the first time you drive it tho
and are you wiring it yourself?

[Sammich]

this doesnt matter if its not in my truck

[Riceboy891]

i was gonna start the wiring on monday, but i do alot of traveling for work and got sent out of town again so ill prolly have to have someone do it for me. Cuz the messed up thing is this is my daily right now.lol. And I already have a guy that has done cressida/JZ wiring harnesses before. I plan on leaving it auto, once the power gets a bit higher, the tranny will be built to accomidate.

[EJ_Allmota]

i like the older model Cressidas more but that will be a nice setup either way.. good shit..

[JITB]

happy as in gay?:(


lol naw as in happy to have the 1z in it.. what u gonna do with it after?

[roscoe]

cressidas are the sex

[Riceboy891]

Oh ok LOL. It will be lowered on serialnine coilovers, some sort of baller sexy wheels (wish I could afford euroline dh's), driftmotion 60-1 turbo kit (500whp), R32 GTR brakes, Supra LSD, 1 pc aluminum driveshaft, FD rx7 rear sway bar, a little bit of tasteful aero, and anything else I see fit. Of course all of this will come in stages (aka as I can afford it)

[garagdoorman]

Looks good:goodjob:

[Riceboy891]

thank you all for the kind words

[mike's02ls1]

Looks good!! I didn't have bell housing bolts, couldn't contact you back lost your number. Sorry... Tubbie will be starting on my swap soon. Hope to have mine finish by December then ship it out to AZ where I live now....

[Buttons]

Oh ok LOL. It will be lowered on serialnine coilovers, some sort of baller sexy wheels (wish I could afford euroline dh's), driftmotion 60-1 turbo kit (500whp), R32 GTR brakes, Supra LSD, 1 pc aluminum driveshaft, FD rx7 rear sway bar, a little bit of tasteful aero, and anything else I see fit. Of course all of this will come in stages (aka as I can afford it)

that transmission isn't going to hold that 500whp that well. you are going to need a tq convertor or another tranny. the stall is set too low. i know you said you were going to wait, but that transmission holds 400 at best.

[Riceboy891]

I didn't mean I would wait till the tranny blows up to address it, when the time comes to up the hp the the tranny will be ready for it. I don't plan on cutting corners on this build.

[Elbow]

So hot, I love these Cressidas.

[Buttons]

I didn't mean I would wait till the tranny blows up to address it, when the time comes to up the hp the the tranny will be ready for it. I don't plan on cutting corners on this build.

short fix, you could always go ahead and put a tq converter for a few hundred.. it might take a bit to install, but it'll be the safe side. i know someone with the stock tranny that has 600hp, it just doesn't work right and shift right. i mean it's possible to use the tranny, but it's just not safe and will lock up on you.

[SiRed94]

that transmission isn't going to hold that 500whp that well. you are going to need a tq convertor or another tranny. the stall is set too low. i know you said you were going to wait, but that transmission holds 400 at best.

Please stop.

[camaro630hp]

tubbies the man! is he the one wiring this thing?

[2turbo4u]

Love the Cress. keep up the good work.

[Riceboy891]

Yeah tubbie is wiring it

[Riceboy891]

2turbo4u empty ur pm's

[mike's02ls1]

Shit is going to be soo much fun to drive when done. Take care of it.. Get on jzxproject.com...

[imports]

awesome!!

[2turbo4u]

2turbo4u empty ur pm's
took out the trash!

[Franco Tirador]

zzzzzzzzzzzzzzzzzzzzzzzzzleeper

[Riceboy891]

I'm on jzxproject all the time

[mike's02ls1]

So Tubbie is done with the wiring, so when is it going to get started?

[DUBSf22c]

Please stop.
reps for you good sir

[dragoncelica]

Nice car i like it!

[LokiSays]

Thats gonna be a badd ass sleeper.

[leobond001]

:couch:hurry up

[Brian*]

I love Cressidas!! I miss my 86...

[imbatman]

dude, car looks sick as hell. good job:goodjob:

[SandM]

looks like it's coming along well. nice project.

[cpearson]

Awesome job man. Can't wait to see the finished product!

[FoolsDrifFWD]

nice mx83 i just picked one up 3weeks ago.

[mike's02ls1]

Sorry to highjack your thread, Tubbie is working on mine right now.

[bloodline]

oh snapp...you dont see these on ia much...fucking awesome man....best of luck wit the build...ill be wanting updates...i used to have the same exact car...i wanted to keep if and rebuild the whole thing...but i gave it to my sister and she crashed the joint...lol

[Dejvid1785]

Sweet car! I'm guessing you're gonna slide it? Save yourself the trouble and get a r154 skip the auto and w58 tranny idea because they won't hold over 300. Props nice car always liked the cressidas. 1JZ FTW! Glad to see the j motors multiplying.

[ep9716]

who did the intercooler?
Pm me plz

[Riceboy891]

well, almost done. Just need a map sensor, igniter, put some beads on the intercooler piping, fluids, new plugs and wires, and..... vvvvrrrroooooommmmmm pssssshhhhhhhhh

[imbatman]

cant wait to see it done!

[hybrid90accord]

that's pretty cool, good to see something different.