PDA

View Full Version : Turbo, AEM, MSD....


jdm>usdm
08-05-2009, 07:12 PM
Im needin some quick cash. So hopefully you guys can help me out.



B18A1
Block Code: 235652x (the last number looks to have been grinded away :???: )

The motor was supposedly "rebuilt" and only had a few thousand miles on it. It began to leak oil from everywhere possible and lost oil pressure. When I removed the motor, the was a slight knock during initial start up when the usaul valve chatter is heard. Everything will be included with the engine minus the valve cover and throttle body.

$100 takes it.

http://i430.photobucket.com/albums/qq22/jdmrider1/forsale001.jpg?t=1250725909


http://i430.photobucket.com/albums/qq22/jdmrider1/forsale002.jpg?t=1250725927

Turbo I ran on the integra for a few months. It was rebuilt but only lasted 3-4 months before it started smoking again. I dont believe its a true turbonetics. But it doesnt have much shaft play, and would be hard to tell that it needs the rebuild if you havent seen it run. Which I have. And it definitely needs a proper rebuild.lol

So ill let it go for $50

http://i430.photobucket.com/albums/qq22/jdmrider1/forsale004.jpg?t=1249512990

http://i430.photobucket.com/albums/qq22/jdmrider1/forsale005.jpg?t=1249513010


http://i430.photobucket.com/albums/qq22/jdmrider1/turbospecs003.jpg?t=1249589504


http://i430.photobucket.com/albums/qq22/jdmrider1/turbospecs004.jpg?t=1249589537




http://i430.photobucket.com/albums/qq22/jdmrider1/turbospecs005.jpg?t=1249589568


http://i430.photobucket.com/albums/qq22/jdmrider1/turbospecs006.jpg?t=1249589593






Cheap manifold. Needs to be rewelded.

$20

http://i430.photobucket.com/albums/qq22/jdmrider1/forsale007.jpg?t=1249513065

http://i430.photobucket.com/albums/qq22/jdmrider1/forsale006.jpg?t=1249513087




AEM fuel rail. Great condition. Off of the ls motor.

$80

http://i430.photobucket.com/albums/qq22/jdmrider1/forsale008.jpg?t=1249513109





MSD SCI ignition box, blaster coil, and dist. cap. All in great working condition.

$150
http://i430.photobucket.com/albums/qq22/jdmrider1/forsale009.jpg?t=1249513169






Sparco race pedals. No hardware included.

$40

http://i430.photobucket.com/albums/qq22/jdmrider1/yo002.jpg?t=1249513474





Another MSD box for sale. In great condition. You get everything you see.

$100

http://i430.photobucket.com/albums/qq22/jdmrider1/msd114.jpg


http://i430.photobucket.com/albums/qq22/jdmrider1/msd115.jpg?t=1229387923
chaseamundo
08-05-2009, 09:18 PM
nice pedals....good luck!
jdm>usdm
08-05-2009, 09:20 PM
Thanks bro
cm7k24
08-05-2009, 09:57 PM
what series motor is the manifold for?
Okie_doke.
08-05-2009, 11:57 PM
lowest you'll take for motor?
jdm>usdm
08-06-2009, 12:03 AM
what series motor is the manifold for?


B series. Came off the ls.
jdm>usdm
08-06-2009, 12:05 AM
lowest you'll take for motor?


Sale is pending on the motor.


And 100 bucks for a good block and head is already pretty low in my book.lol
jdm>usdm
08-06-2009, 12:45 PM
Bump.

Ill be at the Varsity tonight. PM me if you want me to bring anything along!
Okie_doke.
08-06-2009, 01:05 PM
Sale is pending on the motor.


And 100 bucks for a good block and head is already pretty low in my book.lol

Trooo man I was just curious since it said obo but I'm sure you'll have no problem getting rid of it, GL bro:goodjob:
jdm>usdm
08-06-2009, 01:13 PM
Trooo man I was just curious since it said obo but I'm sure you'll have no problem getting rid of it, GL bro:goodjob:


Appreciate it mayne
94jdmcivic
08-07-2009, 03:26 PM
does the turbo have shaft play???
bus-a-vtec
08-08-2009, 12:52 AM
hey man i need dat turbo n d manifold...hit me up asap....pm me ur number n i hit rite up.....plz
chip P.
08-08-2009, 02:41 AM
nice stuffs
jdm>usdm
08-08-2009, 03:44 AM
does the turbo have shaft play???



Has very little shaft play. It looks like a good turbo if you were to judge it just by that. But remember that it does smoke and needs a rebuild.
jdm>usdm
08-08-2009, 03:46 AM
nice stuffs


Not as nice as the stuffs in your sig mayne.lol
jdm_integra
08-08-2009, 01:12 PM
good seller glws
jdm>usdm
08-08-2009, 04:28 PM
good seller glws

Thanks man.

Glad you were able to make it work

:cheers:
99' LuDe
08-09-2009, 10:58 PM
bump for a buddy, glws
jdm>usdm
08-10-2009, 01:03 PM
bump for a buddy, glws


Thanks bro.
WookieMaster
08-11-2009, 08:15 PM
hey you still got that turbo
jdm>usdm
08-12-2009, 03:26 AM
hey you still got that turbo


Yessir
jdm>usdm
08-17-2009, 05:13 PM
Bump it back up.


Sould be at Silver Dollar this weekend.

Let me know if you guys want me to bring something along!
jdm>usdm
08-18-2009, 05:27 PM
up
jdm>usdm
08-21-2009, 05:02 PM
upupup
jdm>usdm
08-22-2009, 12:52 PM
:bump:!!!
jdm>usdm
08-23-2009, 09:46 PM
I know that someone wants an ls engine to play with.
komakazic15
08-23-2009, 11:01 PM
need msd everything but box if possible? price.
jdm>usdm
08-23-2009, 11:06 PM
need msd everything but box if possible? price.


Ill pm you.
jdm>usdm
08-25-2009, 05:49 PM
bumpppppppppppppppppppppa
Jenson
08-25-2009, 05:54 PM
Bump for you...I guess you never got it back running? Great seller, great guy.
MugenCrx
08-25-2009, 06:08 PM
BUMP Trades? pm me
jdm>usdm
08-25-2009, 06:44 PM
Bump for you...I guess you never got it back running? Great seller, great guy.

Thanks man.

Yeah I thought about building this old motor... but just dont have the time or money.

But the new motor I got from you is running beautifully. Something in the dizzy went bad but I got it all fixed. Aside from that, no problems with it whatsoever :D
jdm>usdm
08-25-2009, 06:45 PM
BUMP Trades? pm me


pm'd