FS: HONDATA FULL-RACE ITR GSR B16 MOTORS HEADS GT3076R LSD HKS GREDDY TIAL WISECO ARP

[jessetoedtma]

PLEASE READ EVERYTHING BEFORE ASKING QUESTIONS! I AM LOCATED IN SOUTH CAROLINA- PICKUP IS WELCOME OR I CAN SHIP. DONT PM ME ASKING ME WHERE IM AT!


Name: Jesse

Location: Fort Mill sc (Charlotte Area), and Clemson SC

Contact: [email protected], PM me, or 803 389 3047

Cash, or a possible trade

I AM IN THE MARKET FOR:

· Jeep Cherokee 5 speed 4.0 4x4

· Any diesel truck (manual only)



I have a HUGE stock pile of parts laying around that I would like to get rid of. This time I finally think I’m done. Im in the market for a reliable Jeep Cherokee 4.0 4x4 5 speed- let me know if you have one you would like to sell or possibly trade some parts for-



Prices are for pickup- I have no problem shipping though, and am paypal verified/ an ebay power seller with TONS of vouches.



OBO!



1. Rota Slip Streams spoon copys $500

Great shape, minus one being a slightly different wheel… you cant tell from 5 feet unless you stare

Tires are 205 55 15, and starting to show their age in the front- rears are great

http://i82.photobucket.com/albums/j276/jessetoedtman/yooo039.jpg

http://i82.photobucket.com/albums/j276/jessetoedtman/yooo038.jpg

http://i82.photobucket.com/albums/j276/jessetoedtman/yooo037.jpg

http://i82.photobucket.com/albums/j276/jessetoedtman/yooo036.jpg

http://i82.photobucket.com/albums/j276/jessetoedtman/yooo035.jpg[/IMG (http://i82.photobucket.com/albums/j276/jessetoedtman/yooo035.jpg%5b/IMG)]



2. Half core civic radiator with slim fan $60

Has B series hoses already attached

Slim fan that worked great on a turbo GSR

[IMG]http://i82.photobucket.com/albums/j276/jessetoedtman/yooo054.jpg

http://i82.photobucket.com/albums/j276/jessetoedtman/yooo053.jpg



3. B series OBD1 GSR Distributor $100

Great shape dizzy fits all b series VTEC motors

OEM Honda

http://i82.photobucket.com/albums/j276/jessetoedtman/moreparts024.jpg[/IMg (http://i82.photobucket.com/albums/j276/jessetoedtman/moreparts024.jpg%5b/IMg)]



4. P72 Integra GSR Rod $25 (2 available)

Piston has cracked ringlands

No spun bearings

[IMG]http://i82.photobucket.com/albums/j276/jessetoedtman/honda025.jpg





5. 1995 Hydraulic GSR transmission $550

Came from a STOCK low mileage GSR that was wrecked

Purchased from Eric (Agent Smith)- was told it had no grinds, and I trust him

http://i82.photobucket.com/albums/j276/jessetoedtman/stufomgz132.jpg

http://i82.photobucket.com/albums/j276/jessetoedtman/stufomgz131.jpg

http://i82.photobucket.com/albums/j276/jessetoedtman/stufomgz130.jpg

http://i82.photobucket.com/albums/j276/jessetoedtman/stufomgz129.jpg

http://i82.photobucket.com/albums/j276/jessetoedtman/stufomgz128.jpg[/IMG (http://i82.photobucket.com/albums/j276/jessetoedtman/stufomgz128.jpg%5b/IMG)]



6. 1995 Integra GSR Shift linkage $100

Perfect for EG EK swaps

Comes with shifter as well great shape!

[IMG]http://i82.photobucket.com/albums/j276/jessetoedtman/moreparts013.jpg[/IMg (http://i82.photobucket.com/albums/j276/jessetoedtman/moreparts013.jpg%5b/IMg)]



7. 1995 Integra GSR Axles $75

Came from a running car

One axle has 5k on it

[IMG]http://i82.photobucket.com/albums/j276/jessetoedtman/yooo048.jpg[/IMG (http://i82.photobucket.com/albums/j276/jessetoedtman/yooo048.jpg%5b/IMG)]



8. 1995 Integra GSR B series Mounts $45

Driver size, and passenger side

No rear mount

[IMG]http://i82.photobucket.com/albums/j276/jessetoedtman/moreparts019.jpg

http://i82.photobucket.com/albums/j276/jessetoedtman/moreparts018.jpg



9. Clutch Master cylinder/ slave cylinder $35

Brand new stuff

http://i82.photobucket.com/albums/j276/jessetoedtman/moreparts032.jpg

http://i82.photobucket.com/albums/j276/jessetoedtman/moreparts031.jpg



10. B series VTEC solenoid $75

From my personal build

http://i82.photobucket.com/albums/j276/jessetoedtman/Tonsofpartswow049.jpg



11. GSR Camshafts $75

From my personal build



12. GSR Valve cover $60

Stripped, and went through parts wash

http://i82.photobucket.com/albums/j276/jessetoedtman/Tonsofpartswow001.jpg

http://i82.photobucket.com/albums/j276/jessetoedtman/Tonsofpartswow002.jpg[/IMG (http://i82.photobucket.com/albums/j276/jessetoedtman/Tonsofpartswow002.jpg%5b/IMG)]



13. ARP Head studs $120

For GSR, LSV, B20v etc

BRAND NEW

[IMG]http://i82.photobucket.com/albums/j276/jessetoedtman/Tonsofpartswow036.jpg



14. FRESH GSR BLOCK

0 miles on it

EVERY single nut and bolt is included and bagged for easy assembly

Matching main caps, rear main seal carrier, etc included!

All work performed by Lynch in Greenville

Bored .50 over, cleaned, decked, bead blasted, perfect!

When bored, it was bored for 35 wall clearance (BOOST) when used with the wiseco pistons im selling

http://i82.photobucket.com/albums/j276/jessetoedtman/Tonsofpartswow034.jpg

http://i82.photobucket.com/albums/j276/jessetoedtman/Tonsofpartswow027.jpg

http://i82.photobucket.com/albums/j276/jessetoedtman/Tonsofpartswow026.jpg

http://i82.photobucket.com/albums/j276/jessetoedtman/Tonsofpartswow025.jpg

http://i82.photobucket.com/albums/j276/jessetoedtman/Tonsofpartswow020.jpg

http://i82.photobucket.com/albums/j276/jessetoedtman/Tonsofpartswow023.jpg[/IMG (http://i82.photobucket.com/albums/j276/jessetoedtman/Tonsofpartswow023.jpg%5b/IMG)]



15. Wiseco 81.5mm pistons $450, 375 with block!

For above block brand new

Rings file fitted for above block

Low compression (9.5ish in GSR block with LS crank)

[IMG]http://i82.photobucket.com/albums/j276/jessetoedtman/Tonsofpartswow041.jpg

http://i82.photobucket.com/albums/j276/jessetoedtman/Tonsofpartswow038.jpg[/IMG (http://i82.photobucket.com/albums/j276/jessetoedtman/Tonsofpartswow038.jpg%5b/IMG)]



16. LS Crankshaft $125

Fresh from machine shop

Micropolished, magnafluxed, cleaned, micd, balance checked

Still in bag from Lynch’s machine shop

[IMG]http://i82.photobucket.com/albums/j276/jessetoedtman/Tonsofpartswow017.jpg

http://i82.photobucket.com/albums/j276/jessetoedtman/Tonsofpartswow015.jpg[/IMG (http://i82.photobucket.com/albums/j276/jessetoedtman/Tonsofpartswow015.jpg%5b/IMG)]



17. GSR Oil pan $75

Went through parts washer , slight ding doesn’t affect anything

[IMG]http://i82.photobucket.com/albums/j276/jessetoedtman/Tonsofpartswow008.jpg

http://i82.photobucket.com/albums/j276/jessetoedtman/Tonsofpartswow007.jpg

http://i82.photobucket.com/albums/j276/jessetoedtman/Tonsofpartswow010.jpg[/IMG (http://i82.photobucket.com/albums/j276/jessetoedtman/Tonsofpartswow010.jpg%5b/IMG)]



18. GSR Oil Cooler $100

Same as used on ITR

Complete

[IMG]http://i82.photobucket.com/albums/j276/jessetoedtman/stufomgz144.jpg[/IMG (http://i82.photobucket.com/albums/j276/jessetoedtman/stufomgz144.jpg%5b/IMG)]



19. ACL Bearings- for GSR block with LS crank $50

NEW

$50



20. ITR Fuel Rail $50

Flows more fuel

[IMG]http://i82.photobucket.com/albums/j276/jessetoedtman/itr001.jpg

http://i82.photobucket.com/albums/j276/jessetoedtman/itr002.jpg[/IMG (http://i82.photobucket.com/albums/j276/jessetoedtman/itr002.jpg%5b/IMG)]



21. 1995 Integra GSR Tranny $750

Came from a running car

I will GAURENTEE there are no grinds

BEST I HAVE EVER FELT!

[IMG]http://i82.photobucket.com/albums/j276/jessetoedtman/moreparts006.jpg

http://i82.photobucket.com/albums/j276/jessetoedtman/moreparts005.jpg

http://i82.photobucket.com/albums/j276/jessetoedtman/moreparts004.jpg

http://i82.photobucket.com/albums/j276/jessetoedtman/moreparts003.jpg

http://i82.photobucket.com/albums/j276/jessetoedtman/moreparts001.jpg[/IMG (http://i82.photobucket.com/albums/j276/jessetoedtman/moreparts001.jpg%5b/IMG)]



22. Oil Feed line/Return line setup $50

Don’t use junk lines!

Top notch quality!



23. Garrett GT3076R $950

2500 miles

Shaft place, as expected from a ball bearing turbo without coolant or oil in it

Made 420whp on 13 pounds in a BUILT motor and 500 on higher boost!

Includes cooling lines!

Best turbo for a 500 whp car!

[IMG]http://i82.photobucket.com/albums/j276/jessetoedtman/Tonsofpartswow083.jpg

http://i82.photobucket.com/albums/j276/jessetoedtman/Tonsofpartswow081.jpg

http://i82.photobucket.com/albums/j276/jessetoedtman/Tonsofpartswow080.jpg

http://i82.photobucket.com/albums/j276/jessetoedtman/Tonsofpartswow078.jpg

http://i82.photobucket.com/albums/j276/jessetoedtman/Tonsofpartswow076.jpg[/IMG (http://i82.photobucket.com/albums/j276/jessetoedtman/Tonsofpartswow076.jpg%5b/IMG)]



24. GM 3 bar map sensor $65

With pig tail

[IMG]http://i82.photobucket.com/albums/j276/jessetoedtman/Tonsofpartswow058.jpg[/IMG (http://i82.photobucket.com/albums/j276/jessetoedtman/Tonsofpartswow058.jpg%5b/IMG)]



25. LS Transmission HYDRO $950

I purchased this from a guy that had a FULLY built badass integra- it has:

OBX LSD

Fully rebuilt 2500 miles ago

New input shaft bearing

NO GRINDS

$950



26. REV industries Turbo setup $800

SUPER high quality stuff! ( same as full-race, neukin, synapse, RLD etc)

Flanged for T3 non AC 38mm Tial

Includes 3” downpipe, dumptube as well!

Made 420whp with said GT30R

[IMG]http://i82.photobucket.com/albums/j276/jessetoedtman/Tonsofpartswow077.jpg

http://i82.photobucket.com/albums/j276/jessetoedtman/Tonsofpartswow074.jpg

http://i82.photobucket.com/albums/j276/jessetoedtman/Tonsofpartswow073.jpg

http://i82.photobucket.com/albums/j276/jessetoedtman/Tonsofpartswow075.jpg



27. Full-Race Motorsports manifold setup $1000

Jet Hot coated manifold

3” downpipe looks rough, but doesn’t leak

Clears EF/DA cross members

http://i82.photobucket.com/albums/j276/jessetoedtman/fullrace013.jpg

http://i82.photobucket.com/albums/j276/jessetoedtman/fullrace011.jpg

http://i82.photobucket.com/albums/j276/jessetoedtman/fullrace009.jpg

http://i82.photobucket.com/albums/j276/jessetoedtman/fullrace003.jpg[/IMG (http://i82.photobucket.com/albums/j276/jessetoedtman/fullrace003.jpg%5b/IMG)]



28. Tial 38mm WG $175

Great shape!

[IMG]http://i82.photobucket.com/albums/j276/jessetoedtman/Tonsofpartswow073.jpg[/IMG (http://i82.photobucket.com/albums/j276/jessetoedtman/Tonsofpartswow073.jpg%5b/IMG)]



29. Tial 40mm WG $200

15psi spring

Great shape

[IMG]http://i82.photobucket.com/albums/j276/jessetoedtman/fullrace015.jpg



30. HKS 50mm WG $300

Unknown spring

BADASS RARE WG!

http://i82.photobucket.com/albums/j276/jessetoedtman/parts008.jpg

http://i82.photobucket.com/albums/j276/jessetoedtman/parts004.jpg

http://i82.photobucket.com/albums/j276/jessetoedtman/parts008.jpg



31. Hytech Manifold $1000

100% Race design

Twin scroll

50mm WG flange

T4 inlet

Originally cost $3000

http://i82.photobucket.com/albums/j276/jessetoedtman/parts022.jpg

http://i82.photobucket.com/albums/j276/jessetoedtman/parts021.jpg

http://i82.photobucket.com/albums/j276/jessetoedtman/parts020.jpg

http://i82.photobucket.com/albums/j276/jessetoedtman/parts016.jpg

http://i82.photobucket.com/albums/j276/jessetoedtman/parts018.jpghttp://i82.photobucket.com/albums/j276/jessetoedtman/parts011.jpg



32. Competition Clutch Stage 5 $150

2500 miles

Showing some wear on the disc

New disc is 100 from CC

Holds well into 600whp range!

http://i82.photobucket.com/albums/j276/jessetoedtman/Tonsofpartswow056.jpg[/IMG (http://i82.photobucket.com/albums/j276/jessetoedtman/Tonsofpartswow056.jpg%5b/IMG)]



33. OBD2a-OBD1 harness $65

Perfect for 96+ integra civic etc

Bought from XENOCRON

New!





34. Tapped LS oil pan $50

-10AN bung

Good shape

[IMG]http://i82.photobucket.com/albums/j276/jessetoedtman/pix029.jpg

http://i82.photobucket.com/albums/j276/jessetoedtman/pix027.jpg



35. ARP LS Head studs $75

Good shape 100% complete

http://i82.photobucket.com/albums/j276/jessetoedtman/pix012.jpg



36. Chipped P72 $150

Has spoon program I was told

http://i82.photobucket.com/albums/j276/jessetoedtman/parts031.jpg



37. Vacuum manifold $30

Good shape

Golden Eagle brand

http://i82.photobucket.com/albums/j276/jessetoedtman/ecu006.jpg



38. Greddy Cooling plate $60

Fits 94+ integra

Definitely helps- I have read on forums where people logged 10* less coolant temps

RARE

http://i82.photobucket.com/albums/j276/jessetoedtman/Tonsofpartswow071.jpg[/IMG (http://i82.photobucket.com/albums/j276/jessetoedtman/Tonsofpartswow071.jpg%5b/IMG)]



39. 98+ integra ALL RED tail lights

Slight crack (have piece and can be glued back on

$100 plus your stock tails



40. Short ram for integra civic etc $25



41. LS Valvecover $20

OBD0/1 style

Painted red

[IMG]http://i82.photobucket.com/albums/j276/jessetoedtman/fullrace019.jpg[/IMG (http://i82.photobucket.com/albums/j276/jessetoedtman/fullrace019.jpg%5b/IMG)]



42. OBD1 LS Distributor $65

Came from running boosted integra

[IMG]http://i82.photobucket.com/albums/j276/jessetoedtman/pix015.jpg





43. LS Head $35

Good shape

Recent valvejob

CHEAP

http://i82.photobucket.com/albums/j276/jessetoedtman/pix025.jpg

http://i82.photobucket.com/albums/j276/jessetoedtman/pix018.jpg



44. 1995 Integra GSR Oil pump $20

Great shape

For an additional $20 I can shim it to ITR spec for more oil pressure



45. OEM 1995 Integra GSR Throttle body $50

OEM all sensors included

Perfect for your swap!

http://i82.photobucket.com/albums/j276/jessetoedtman/ugh050.jpg



46. OEM 1995 Integra GSR Intake manifold $100

100% complete

All sensors included

Great shape!

http://i82.photobucket.com/albums/j276/jessetoedtman/ugh047.jpg



47. 92+ Civic D series shift linkage $25

Fits many more

Cheap as hell



48. OEM GSR Exhaust manifold $35

Few scratches dents etc

From 95 spec integra



49. GSR Hondata Intake manifold gasket $35

Used for low mileage

http://i82.photobucket.com/albums/j276/jessetoedtman/Tonsofpartswow003.jpg

http://i82.photobucket.com/albums/j276/jessetoedtman/Tonsofpartswow005.jpg



50. 1999 Civic SI B16A2 PR3 Head $350 FIRM!

Looks to be in pretty good shape

Head, cams, gears only

No vtec solenoid

Tapped for LSVTEC

http://i82.photobucket.com/albums/j276/jessetoedtman/Tonsofpartswow070.jpg

http://i82.photobucket.com/albums/j276/jessetoedtman/Tonsofpartswow062.jpg



51. 81.5MM ITR P73 pistons $70

Brand new with rings/wrist pins etc

http://i82.photobucket.com/albums/j276/jessetoedtman/stufomgz113.jpg

http://i82.photobucket.com/albums/j276/jessetoedtman/stufomgz112.jpg



52. B series/ H series Knock sensor $50

Great shape

http://i82.photobucket.com/albums/j276/jessetoedtman/moreparts010.jpg

[tinkolby_25]

bump for a hell of alot of good parts

[NoWAyItZTOMmY]

whole lotta shit!

[ls-r teg]

u sure those wheels are rotas? look like drags 2 me..

[hondalover00]

interested in ls head studs....pm me sir

[.:Stirfry:.]

good stuff my man:.
glws yo

[Starrfire]

Lots and lots of turbo stuff, glws.

[silverDA]

look like slips to me/




u sure those wheels are rotas? look like drags 2 me..

[j0natell0]

i want the gsr acl bearings, and the Oil Feed line/Return line setup. Send me pics cause ur links dont work.

CASH IN HAND, for paypal..

[lcortes32]

hey im interested in the pistons pm me cash in hand...

[jessetoedtma]

Everyone has been PMd


u sure those wheels are rotas? look like drags 2 me..

I was told they are rota slips when I purchased- either way there both essentially identical knock offs lol

[Gorilla Eg!]

that hi-tech mani IS FAWKING AMAZING!!!!

[jessetoedtma]

PMs replied to, just for everyones knowledge- Clemson SC is off exit 19 in South Carolina off 85. Its roughly 1.5 hours away from yall

[Thundercat]

bump

[ls-r teg]

rotas have a little groove inbetween the spokes...hard to explain

but it looks like 1 rota and 3 drags...mite jus b pix.




look like slips to me/

[VickNotic]

rotas & drags real or fake! thats what they usually go for any ways. And GL on selling these baddass Parts. Great parts are being sold at hard times nowadays, and folks like me need a job to make ends meet haha GL again on the sales.

[jessetoedtma]

One of them has that said groove- so maybe you are right. Regardless as Vick said its the going price-

[jessetoedtma]

pending turbo sale

[CeOTiO8]

Damn bump for alot of parts.... Might need that LS head with GSR manifold lmk a price with it shipped please

[jessetoedtma]

sorry the LS head sold

[marcos713]

bumo for a hella good parts!!! GL bro!

[jessetoedtma]

up top more stuff is selling!

[jessetoedtma]

up top

[jadakid88]

jesse you have pm..

[Thundercat]

good prompt seller

[sikfricks]

that manifold is badass wish i had the cash

[Turbodude06]

Lots of good parts. GLWS......

[jessetoedtma]

thanks yall

[mieghatch]

hey. will you sell parts off the gsr manifold or i have to buy the hole thing?

[jessetoedtma]

Pmd

[jessetoedtma]

up toppp

[jessetoedtma]

Tons of stuff sold I need to update this thread!

[jessetoedtma]

bump

[jessetoedtma]

lotta stuff guys!

[mieghatch]

clear your pm's...................

[JDM onlyy]

bump for sh!t loads of good parts

lol old thread dude. check dates..

[cm7k24]

man you've always got some damn good stuff for sale.

bump