PDA

View Full Version : FS: Massive Part OUT Integra *JDM FRONT, ITR SWAP, BAER, HYTECH, NOS, SPARCO*



Vteckidd
08-04-2009, 11:05 AM
Ok i have tried to sell this car in its entirety , but its not working so now its up for FULL PART OUT.

Integra Type_R Engine Swap COMPLETELY REBUILT WITH RECEIPTS
Engine
Rebuilt JDM Type-R Motor less than 500 miles on it balanced and blue printed completely refreshed
New rings,bearings, valve stem seals,valve guides, waterpump, timing belt and tensioner, headgasket
Type-R Trans with LSD
Competition Clutch Strip Series
Chromoly lightened flywheel
AEBS Intake Manifold fully ported, port matched and polished.
Hondata Intake Manifold Gasket.
Rage Header(NOT HYTECH, RAGE)
Unorthodox racing Ultra SS pulley kit red

$4000 OBO WILL PART OUT


Custom 3 inch Exhaust with Apexi dunk muffler
3 inch Random technology catalytic converter
$350 OBO


Fluidyne Radiator
- $250 OBO

FAL flexalite fan red with relay kit
$100 (make package deal with radiator)

Black Samco coolant hose kit
Make Offer

R1 coolant can chrome with stainless hose
$50 OBO

MSD PARTS
-MSD SC Ignition
-MSD SS Blaster cap
-MSD Distributor cap
-MSD 8.5mm wires
Make Offer


Exterior
All metal OEM JDM Type-R front end conversion
JDM sidemarkers
Authentic JDM Bomex body kit
Vis carbon fiber hood XGT JDM
Vis carbon fiber trunk
Veilside carbon fiber wing on stock white trunk with remote opening
Car has been repainted its stock color Honda frost white with all shaved emblems,door moldings and antenna holes

MAKE OFFERS ON ALL EXTERIOR PARTS, Dont be SHY. I figure the Fenders, Hood, Headlights, core support worth at least $800ish but im willing to part out pieces individualy.


Suspension
Tein Flex system with EDFC
$800
Skunk 2 front adjustable camber kit-$100
Sprint pro series rear adjustable camber kit-$75
Neuspeed rear sway bar powder coated red with new bushings- $125
Neuspeed front upper strut tower bar powder coated white-$75


Make Offers

Brakes
Front Baer Track system 12.5 inch rotors cross drilled and slotted with red anodized center
Rear Baer Track system 13 inch rotors cross drilled and slotted with red anodized center
Custom fabricated rear E-brake system to make functional with upgrade
Baer stainless steel braided brake lines


$1100 FOR THE FRONT
$1100 FOR THE REAR

THese were over $2000 PER AXLE BRAND NEW

Wheels
19 inch R-1 GTR 10 gloss black with polished lip
215/35/19 Bfgoodrich g-Force™ T/A® KDW

Make offer

http://i24.photobucket.com/albums/c21/Vteckidd/DSC_0208.jpg

http://i24.photobucket.com/albums/c21/Vteckidd/DSC_0206.jpg

http://i24.photobucket.com/albums/c21/Vteckidd/DSC_0211.jpg

http://i24.photobucket.com/albums/c21/Vteckidd/DSC_0210.jpg
http://i24.photobucket.com/albums/c21/Vteckidd/DSC_0214.jpg

http://i24.photobucket.com/albums/c21/Vteckidd/DSC_0215.jpg
http://i24.photobucket.com/albums/c21/Vteckidd/DSC_0217.jpg


PM ME WITH ANYTHING YOU ARE INTERESTED IN!

MAKE OFFERS NEED THIS STUFF GONE NEED TO MAKE MY LAMBO PAYMENT.

LRT
08-04-2009, 01:19 PM
ay how much do you want for the trany?

Vteckidd
08-04-2009, 01:28 PM
$1000

PURP
08-04-2009, 01:34 PM
This is a super nice car. I guess the jdm kids would rather buy ebay. Sucks you got to part out. Good seller. bump

404 THE DC4
08-04-2009, 07:00 PM
will u part out jdm front end? if yes, how much do you want for jdm headlight?

Vteckidd
08-04-2009, 11:22 PM
headlights i want $500 they are Black housing NON HID

TWINKIE
08-05-2009, 03:44 AM
firm on suspension?
not trying to lowball just asking

Vteckidd
08-05-2009, 09:01 AM
not totally firm, make a REASONABLE OFFER

DTEG
08-06-2009, 11:17 PM
how much for the fenders and headlights altogether?

TWINKIE
08-08-2009, 11:09 AM
pmd

christian
08-08-2009, 12:35 PM
hey bro your a life saver ill take you camber kit off you hands
but one question it should fit a 93 honda civic hatch?

95turd
08-08-2009, 02:32 PM
is this johnathan. just wonderin good stuff if you are i think i know you way back from tqs.

2.0lturbo4
08-12-2009, 08:45 AM
BUMP!

B18c1Turboed
08-12-2009, 11:15 AM
Prices on
Black Samco coolant hose kit
Vis trunk
and passenger fender..... Let me know

4drturboteg
08-12-2009, 03:21 PM
how much u want for the taillights?

silversol
08-12-2009, 03:28 PM
abs unit? as long as the abs system in cel free. pm me

The EM1 kid.
08-13-2009, 08:59 PM
how much for the header and exhaust?

2.0lturbo4
08-18-2009, 07:21 PM
TTT

Burnz1one
08-18-2009, 11:08 PM
still got the sparco's? pm me info

JDMGRNAV6
08-18-2009, 11:19 PM
damn good shit

Sewelh2
08-20-2009, 04:00 PM
[email protected]

Sewelh2
08-20-2009, 04:01 PM
how much for fender?

Sewelh2
08-20-2009, 04:04 PM
How much for the fenders with side markers and the header?

btldzc
08-20-2009, 07:10 PM
is that an OBD1 Dist?

KevinT707
08-20-2009, 10:30 PM
Hey Mike, PM best price for that Type-R tranny w/ LSD

It's about time I get a good tranny once & forever!

christian
08-22-2009, 09:45 PM
Pm'd you really want your camber kit

Vteckidd
08-23-2009, 12:45 PM
Hey Mike, PM best price for that Type-R tranny w/ LSD

It's about time I get a good tranny once & forever!
$1000

Vteckidd
08-23-2009, 12:47 PM
Pm'd you really want your camber kit
again, please read, im not taking off a $100 camber kit until some other BIG ITEMS sell.

Please people stop asking for tailights and the gauge cluster, i was clear, i will not part the little stuff out until one of the following happens:

ENTIRE FRONT END SELLS
TRANSMISSION , LONGBLOCK, or ENTIRE SWAP SELLS
Entire INTERIOR SELLS
SHELL SELLS
TEIN SUSPENSION SELLS

If one of those doesnt happen im not parting out the rest of the car.

Vteckidd
08-23-2009, 12:49 PM
Ill sell the VIS Trunk for $550 (CARBON FIBER USUALLY OVER $600+SHIPPING)

Sparcos still available

k3tsurui
08-23-2009, 09:04 PM
are those teins sitting on itr lca or what kind of lca? just wondering if it will fit my eg hatch with itr lca....and i am assuming that by "with edfc" it comes with the computer and all the individual motors? i know you are known for selling good parts but i am really meticulous about what goes into my car so if i could get pics that would be a great selling pt....pm me best price picked up if you still have them 2nd great selling pt but equally as important :blah:

Burnz1one
08-23-2009, 09:41 PM
got any pics of the seats?

TWINKIE
08-25-2009, 03:35 PM
pmd again...

civic gsr
08-25-2009, 03:44 PM
gow much for the brake set on alllllll it fit a 2000 si if so pm me

civic gsr
08-25-2009, 03:47 PM
nvm i saw the price good shit

2.0lturbo4
08-28-2009, 09:35 PM
Bump!

dirtragz
09-07-2009, 03:49 AM
still got seats?

Vteckidd
09-07-2009, 10:44 AM
yes still have seats

dirtragz
09-07-2009, 10:48 AM
are you taking trade offers

yes still have seats

Vteckidd
09-07-2009, 10:51 AM
no cash only

dirtragz
09-07-2009, 10:54 AM
ive got a $6k tool box , looking for go fast stuff was thinking bout some seats or that complete motor swap
no cash only