PDA

View Full Version : fs, phantom grip v-tec valvetrain


mumbles
10-08-2005, 10:35 AM
phantom grip all-motor valvetrain, flat faced valves, dual springs, tit retainers, and keepers only has about twenty miles on it. its for a any b-series v-tec head retail $600. ok $450 or best offer
mumbles
10-08-2005, 01:15 PM
don't be scared make an offer, i won't be affended by any offer.
mumbles
10-09-2005, 07:11 PM
ok i'll take $350
Jdm94Coupe
10-09-2005, 07:35 PM
im confused, what is this again?
mumbles
10-10-2005, 07:56 AM
its an all-motor valvetrain by phantom grip. it has flat faced valves and dual valve springs, titanium retainer, honda keepers and it will fit a gsr head or typeR head. they are meant for high rpms without breaking. if you want to run cams in your car you need this stuff.
Jdm94Coupe
10-10-2005, 10:33 AM
so if i get cams, these are all i need so i dont fuck somethin up.....so i could run skunk2 stage 2 cams and this valvetrain and i would be fine? or does it only work with a few types of cams? interested in any trades?
mumbles
10-10-2005, 01:02 PM
yes you can run skunk2 stage 2. you can run just about any cam you want. but if you plan on turboing your car flat faced vavles are not the best application. all depends on what you have to trade?
Vteckidd
10-10-2005, 03:52 PM
www.phantomgrip.com

these come with Valves, Springs, and Retainers. They are called "all motor" cause they are flatfaced valves, but in reality, they only bump compression .2 at the most. the cc and dish of the valve isnt taht aggressive.

Will fit ITR, GSR, B16 Heads. I dont know the spring rated of the Valvesprings or the Seat Pressure, but im sure they are similar to Skunk2/Ferrea Specs, since the valves are made by Ferrea for Phantom Grip.

$350 is a STEAL, they retail for $600
mumbles
10-11-2005, 08:30 AM
bump
mumbles
10-20-2005, 12:02 PM
bump
mumbles
10-21-2005, 10:09 AM
bump