New Crew/Team/Squad: Integra

[gforce71]

only becuz i gots the new tat and that arm wasn't completely functional, just wait, there will be other meets.

oh noezz!!

[ilovemyhonda.]

oh noezz!!

thats what you said last time lol..

[gforce71]

thats what you said last time lol..

yep, and look where we are with that :goodjob:

[ilovemyhonda.]

yep, and look where we are with that :goodjob:

the boy who cried wolf.

[gforce71]

the boy who cried wolf.

lol

[ilovemyhonda.]

lol

Just give them to me and save both of us the hassle.

[steelmatt6]

yep, and look where we are with that :goodjob:

Dayuuuumm. Haha

[steelmatt6]

By the way, I sort of live under a rock when it comes to knock off companies, but was it Drags goal to completely copy Rota, or are Rotas and Drags made by the same company? Sort of like MB Motorsport and ATECH. They are the same thing. Are these?

...Andrew, those are Rotas, not Drags, right? I cants rememburz!

[gforce71]

By the way, I sort of live under a rock when it comes to knock off companies, but was it Drags goal to completely copy Rota, or are Rotas and Drags made by the same company? Sort of like MB Motorsport and ATECH. They are the same thing. Are these?

...Andrew, those are Rotas, not Drags, right? I cants rememburz!


haha rota, drag, nippon. they all pretty much make the same knockoffs lol. and yes, I haz roTaZZZZ!!! lol

(for nowz)

[steelmatt6]

Nice!

Personally, I am saving up for a set of S-Drives, and maybe gunmetal MB Competition wheels. I love 5-spoke rims, and the fact that these comps are covered with a lifetime warranty, weight 20lbs, and look good...all for around $115 a wheel...can't beat that!

[gforce71]

Nice!

Personally, I am saving up for a set of S-Drives, and maybe gunmetal MB Competition wheels. I love 5-spoke rims, and the fact that these comps are covered with a lifetime warranty, weight 20lbs, and look good...all for around $115 a wheel...can't beat that!

sounds like a plan!

[youngmill]

I'm in class lol. O btw my friend could get your o2 sensor. he said some1 bought the last 1 the day before I asked.

Hey I looked at that water pump...i didn't get back to u because I didn't know if i wante to use it. I found out I cant use it for my swap...Its a OE spec, and I just gotta send u the part #...if u want me to bring it to the V lmk

[ilovemyhonda.]

Dayuuuumm. Haha

quiet or yours are next! :ninja:

[marcos713]

Hey I looked at that water pump...i didn't get back to u because I didn't know if i wante to use it. I found out I cant use it for my swap...Its a OE spec, and I just gotta send u the part #...if u want me to bring it to the V lmk

Oh why can't u use it for your swap? But yea man, if its OEM I'll take it. It should have P72 stamped somewhere on it and I think the brand is yamada or something like that if its OEM. But yea ajust send me the part number n we'l go from there :goodjob:

[ilovemyhonda.]

Oh why can't u use it for your swap? But yea man, if its OEM I'll take it. It should have P72 stamped somewhere on it and I think the brand is yamada or something like that if its OEM. But yea ajust send me the part number n we'l go from there :goodjob:

Hiii BFF!

[marcos713]

Hiii BFF!

Heyyy!! How you doin this morning??

[youngmill]

Oh why can't u use it for your swap? But yea man, if its OEM I'll take it. It should have P72 stamped somewhere on it and I think the brand is yamada or something like that if its OEM. But yea ajust send me the part number n we'l go from there :goodjob:

I cant use it because i have a gsr bottom end, and its a b16 water pump lol...Also, nah on the p72 stamp...well the box says its OE specs, so I guess its not an orginal Honda water pump, meaning from the dealer...Man u gotta look at it and see what u wanna do...im gonna post or send u a pic of the box and pupm...matter of fact ima just bring it to the V and let you take it or leave it...if u feel its what your looking for, you knoe;)

[ilovemyhonda.]

Heyyy!! How you doin this morning??

Fine, eating my breakfast slowly. Dealing with these annoying clients. Wish my new tat would heal already. The arm is annoying!!! I didn't think it would be that bad but goodness!! YOU?

[marcos713]

I cant use it because i have a gsr bottom end, and its a b16 water pump lol...Also, nah on the p72 stamp...well the box says its OE specs, so I guess its not an orginal Honda water pump, meaning from the dealer...Man u gotta look at it and see what u wanna do...im gonna post or send u a pic of the box and pupm...matter of fact ima just bring it to the V and let you take it or leave it...if u feel its what your looking for, you knoe;)

actually i was gonna use it on my gsr bottom end to. i went to HONDA yesterday and asked fo the b16 water pump part # and it was the same as a gsr one from ACURA. turns out all 96-01 OIL pumps are the same. yea well ok just send me a pic or something. if its not oem il proly get an oem one i saw on ebay for 120 with the timing belt as well


Fine, eating my breakfast slowly. Dealing with these annoying clients. Wish my new tat would heal already. The arm is annoying!!! I didn't think it would be that bad but goodness!! YOU?

lol you must love your job huh? o what tattoo did you get? im planning on getting my 1st 1 soon :D
me just go out of chem a lil while ago, no im supposed to be doing hw but im on here lol

[steelmatt6]

I just bought an NPW water pump, (prostreet accidently sent me a GSR belt and pump instead of an LS belt and pump. Conitech belt instead of Gates too. But in the end, I recieved more expensive parts.) Just a warning, I am running a Yamada...its a little over a year old, and leaks. The gasket already failed I think. Not sure what the cause would be. Inproper install or defective part.

EDIT! I think it is stamped T22 (the NPW) if that is relevant at all. Just means it is compatible for the VTEC engines, but will work with B18Bs.

[marcos713]

I just bought an NPW water pump, (prostreet accidently sent me a GSR belt and pump instead of an LS belt and pump. Conitech belt instead of Gates too. But in the end, I recieved more expensive parts.) Just a warning, I am running a Yamada...its a little over a year old, and leaks. The gasket already failed I think. Not sure what the cause would be. Inproper install or defective part.

EDIT! I think it is stamped T22 (the NPW) if that is relevant at all. Just means it is compatible for the VTEC engines, but will work with B18Bs.

whooops made a mistake on my prior post, not all water pumps are the same, all 96-01 OIL pumps are the same lol not water pumps. how much was that water pump and belt you bought?

[ilovemyhonda.]

actually i was gonna use it on my gsr bottom end to. i went to HONDA yesterday and asked fo the b16 water pump part # and it was the same as a gsr one from ACURA. turns out all 96-01 OIL pumps are the same. yea well ok just send me a pic or something. if its not oem il proly get an oem one i saw on ebay for 120 with the timing belt as well



lol you must love your job huh? o what tattoo did you get? im planning on getting my 1st 1 soon :D
me just go out of chem a lil while ago, no im supposed to be doing hw but im on here lol

I like it but can't stand stupidity. This was my 6th tattoo. Its a black star on my forearm below my elbow if you are judging from my wrist to my elbow its in between. Its a black outline with red outline on the inside

[marcos713]

I like it but can't stand stupidity. This was my 6th tattoo. Its a black star on my forearm below my elbow if you are judging from my wrist to my elbow its in between. Its a black outline with red outline on the inside

i know what you mean, i work at QT and people get on my nerves not knowing how to pump gas or they wait in line and once they get to the front they still dont know what they want!!ugh gets on my nervess!!

onice!! my friend has something like that on his back. where do you get em done at?

[ilovemyhonda.]

i know what you mean, i work at QT and people get on my nerves not knowing how to pump gas or they wait in line and once they get to the front they still dont know what they want!!ugh gets on my nervess!!

onice!! my friend has something like that on his back. where do you get em done at?

Which QT do you work at? I got it done at Notorious Tattoos in Decatur. My friend works/tats there.

[steelmatt6]

whooops made a mistake on my prior post, not all water pumps are the same, all 96-01 OIL pumps are the same lol not water pumps. how much was that water pump and belt you bought?

The water pump THAT I ORDERED (T17, or whatever number for the LS) was $70 and the Gates belt was $65. But I ended up getting the...actually, let me check on prosteet. I'll get some real figures. NOTE AGAIN: I oredered the LS parts, but I will find out what the GSR parts actually cost...

[steelmatt6]

HERE YOU GO

http://www.prostreetonline.com/oem/wizard.asp?year=1999&make=AC&model=INT-GSR3-001&category=A&part=Timing+Belt+Kit

http://www.prostreetonline.com/oem/wizard.asp?year=1999&make=AC&model=INT-GSR3-001&category=G&part=Water+Pump

These are the parts I actually recieved. And thank God the GSR belt and pump combo will work with an LS. Otherwise, I would not be happy. Prostreet has a lot of neat stuff, but shipping takes FOREVER. I ordered a shift knob Feb. 25th. Still have not recieved it. I am going to complain tomorrow, because tomorrow is already April!

[youngmill]

actually i was gonna use it on my gsr bottom end to. i went to HONDA yesterday and asked fo the b16 water pump part # and it was the same as a gsr one from ACURA. turns out all 96-01 OIL pumps are the same. yea well ok just send me a pic or something. if its not oem il proly get an oem one i saw on ebay for 120 with the timing belt as well


Well there you have it...we both cant use it then...Alright Mar, good luck on your build...
lol you must love your job huh? o what tattoo did you get? im planning on getting my 1st 1 soon :D
me just go out of chem a lil while ago, no im supposed to be doing hw but im on here lol

Also, If any body is interested...My friend has his own shop and is doing all kinds of work on cars...He does custom valve covers, wire tucks, paint on your engine bay, shaved and painted engine bays, and much more...Lmk if any one is interested... Sample:2cents:

[steelmatt6]

INTERESTED!

lol

[marcos713]

Which QT do you work at? I got it done at Notorious Tattoos in Decatur. My friend works/tats there.

I work at 1 off of thorton rd on i20. Oo how much do they charge there??


HERE YOU GO

http://www.prostreetonline.com/oem/wizard.asp?year=1999&make=AC&model=INT-GSR3-001&category=A&part=Timing+Belt+Kit

http://www.prostreetonline.com/oem/wizard.asp?year=1999&make=AC&model=INT-GSR3-001&category=G&part=Water+Pump

These are the parts I actually recieved. And thank God the GSR belt and pump combo will work with an LS. Otherwise, I would not be happy. Prostreet has a lot of neat stuff, but shipping takes FOREVER. I ordered a shift knob Feb. 25th. Still have not recieved it. I am going to complain tomorrow, because tomorrow is already April!

Lol since february??? I would have canceled the order and ordered 1 from ebay. :goodjob:


Also, If any body is interested...My friend has his own shop and is doing all kinds of work on cars...He does custom valve covers, wire tucks, paint on your engine bay, shaved and painted engine bays, and much more...Lmk if any one is interested... Sample:2cents:

We can use b16 water pumps. A vtec water pump is a vtec water pump, just the B17s use a different 1. And thanks man, I just got my oem oil pump n acl bearing in today.. Just a water pump n timing belt and the gaskets and my CP internals and it'l be ready to get put together :D

[marcos713]

double post..

[allout13]

I haz new wheels :ninja:

[marcos713]

I haz new wheels :ninja:

hmmmm care to show us :D or am i gonna have to wait til our SPSU meet next week?


o matt, whatever happened to the idea you had of making a SPSU and KSU meet together....im sure ya could join us at our meet

[ilovemyhonda.]

I work at 1 off of thorton rd on i20. Oo how much do they charge there??



Lol since february??? I would have canceled the order and ordered 1 from ebay. :goodjob:



We can use b16 water pumps. A vtec water pump is a vtec water pump, just the B17s use a different 1. And thanks man, I just got my oem oil pump n acl bearing in today.. Just a water pump n timing belt and the gaskets and my CP internals and it'l be ready to get put together :D

He gives good rates depending on the tat. He is on here. EL42 is his username. I am sending you a PM.

[youngmill]

ok see you at the varsity for those thats going. im going straight from work so i will be there early. alright marcos ttyl. damn its nice out side! i got on shorts:) hahaha yeah! oh marcos thats good to know about the water pump. i was gonna sell it thinking i couldn use it. im just gonna boost my car pretty soon, well hopefully by the end of spring. its not gonna be for racing, just for looks and ah little more power. my friend wants to paint my engine bay and tuck my wires, i just need to find the time to let him. good luck once again:goodjob:

[youngmill]

I haz new wheels :ninja:

thats whats up my g:) happy to hear your bouncing back on them thieves. much luck to you to son:goodjob:

[steelmatt6]

BE CAREFUL AT THE VARSITY!!!!

it's April Fools :ninja::police:...........lol

[steelmatt6]

Good to hear you got new wheels Chad!

And Marcos, we def. need to set something up sometime: for the KSU/SPSU meets. Just been busy!

[allout13]

hmmmm care to show us :D or am i gonna have to wait til our SPSU meet next week?


Last time I had wheels that everyone had. This time around I wanted wheels that no one would have.
I know a lot of people will think they are ugly, but I love them!
http://i74.photobucket.com/albums/i258/allout13/pepperpots.jpg

Im not sure if Ill have them on by the meet. I was planning on polishing them out to a mirror finish, but they are in so good of shape (especially for a 26 year old set of wheels) that I'm not sure I want to mess with them. Im hoping to slam the teg soon. I just need to sell one of my bicycles and my old H&R's



o matt, whatever happened to the idea you had of making a SPSU and KSU meet together....im sure ya could join us at our meet
^^^this

[steelmatt6]

^
And I think I will! This is what happened:

A good portion of the kids act stupid in the parking deck meets, so I don't do those anymore...Weston does. And I don't go. lol. The police are there everytime because someone does something. I was thinking about having the meets off campus somewhere, but I'm just gonna come to an SPSU meet sometimes. lol. I have been real busy lately.

BTW, I am not ordering from Prostreet again. Took them over a month for them to tell me that they still did not have a certain item, and I finally supposedly recieved a credit. They listen well, but seemed pissed at me over the chat function. When I told them to have a good day, they immediatley signed off. I'm sorry prostreet, but if you can't get you stuff together, don't take it out on the customers. I told them to confirm that they had the right card on my profile, because the last Rep. got it wrong, and apologized. This person was like "Sir, we can not credit your order on a different card. Only the card you used for the order"...me, i know that. I am not stupid. But you guys messed it up last time, so I have to ask. Tell me the last 4 digits already! haha

My review:
Website Layout= 9 out of 10
Parts to choose from= 10 out of 10
Customer Service = 5 out of 10
Correct Inventory = unlikely
Likelyhood that they will screw up your order = very likely :( oh, and very very slow shipping

[youngmill]

^^lol damn

[allout13]

anyone else getting awesome gas mileage with this warm weather?

38.5mpg on my last tank! :bump:

[marcos713]

anyone else getting awesome gas mileage with this warm weather?

38.5mpg on my last tank! :bump:


hmmm havnt really noticed anything...but i guess its because i dont drive my car that much anymore and my 3in exhuast doesnt help either lol

[steelmatt6]

^^lol damn

lol, sorry for the rant :)

I is calm know, haha

In relation to the gas mileage, I will have to check next time I fill her up. hmmm. Marcos, a 3in exhaust has very little back pressure. You would think it would help gas mileage haha. Why not go 2.5in? Get a good balance of flow and back pressure.......unless your doing some sort of engine build, COUGH COUGH that we don't know about :ninja::burnout:

[allout13]

hmmm havnt really noticed anything...but i guess its because i dont drive my car that much anymore and my 3in exhuast doesnt help either lol

true lol.
I drive the piss out of mine so I fill up at least once a week.
about ~500 miles a week on average
this week will be around 770 miles


lol, sorry for the rant :)

I is calm know, haha

In relation to the gas mileage, I will have to check next time I fill her up. hmmm. Marcos, a 3in exhaust has very little back pressure. You would think it would help gas mileage haha. Why not go 2.5in? Get a good balance of flow and back pressure.......unless your doing some sort of engine build, COUGH COUGH that we don't know about :ninja::burnout:

word on the street is...
http://www.importatlanta.com/forums/showthread.php?280955-How-much-power-can-i-make-with..&highlight=

[youngmill]

marcos already told us he is waiting on some special parts. he is building, i dont know if he will boost, im going to boost mines tho.

[youngmill]

also i drive about 700~1000 miles a week. i get my oil changed twice a month, and i can put id say about $15 in premiume gas drive all the way to hwy 16 in griffin ga pass summit racing and back. my gas light wont even be on when i get back home. at most thats about 120 miles to and from work mon thru friday. if you include the weekends, its around 1k ah week. i would say i get pretty good gas mileage in my car or else i would have been quite and found ah job closer to home.

[marcos713]

lol, sorry for the rant :)

I is calm know, haha

In relation to the gas mileage, I will have to check next time I fill her up. hmmm. Marcos, a 3in exhaust has very little back pressure. You would think it would help gas mileage haha. Why not go 2.5in? Get a good balance of flow and back pressure.......unless your doing some sort of engine build, COUGH COUGH that we don't know about :ninja::burnout:

i got the 3in b/c i just wanted to be louder, no special reason :rolleyes:

true lol.
I drive the piss out of mine so I fill up at least once a week.
about ~500 miles a week on average
this week will be around 770 miles



word on the street is...
http://www.importatlanta.com/forums/showthread.php?280955-How-much-power-can-i-make-with..&highlight=

.........i posted that up for my friend :D


marcos already told us he is waiting on some special parts. he is building, i dont know if he will boost, im going to boost mines tho.

special parts? i just ordered some simple bearing and an oil pump...nothing really special about those :dunno:




n im just a poor full time college student working part time at QT...i dont think thats enough money to go boost :no: ;)

[steelmatt6]

Well, I say we all get together (becase I might do an NA or Boost build :ninja:) and get a group buy on some parts :goodjob:

[marcos713]

Well, I say we all get together (becase I might do an NA or Boost build :ninja:) and get a group buy on some parts :goodjob:

what kinda parts you talking bout?

[steelmatt6]

what kinda parts you talking bout?

Fuel Injectors, Upgraded Clutches, Turbos, Manifolds, just that kind of stuff. For example, if 3 of us wanted to buy the same turbo mani, maybe they could cut $600 into $500??? I really don't know, haha

[marcos713]

Fuel Injectors, Upgraded Clutches, Turbos, Manifolds, just that kind of stuff. For example, if 3 of us wanted to buy the same turbo mani, maybe they could cut $600 into $500??? I really don't know, haha

hmmm well i need a clutch....

[steelmatt6]

Man, today is such a nice day!

Import Alliance is 6 days away :)

[teh_mugen18]

^^^I know right, i can't believe its so close!!

[allout13]

so the rollout from the big chicken to the rollout from the v to import alliance is still on right?

[marcos713]

^^^I know right, i can't believe its so close!!

I knw n I still have a few things to fix on my car before then.....


so the rollout from the big chicken to the rollout from the v to import alliance is still on right?

I think so

[steelmatt6]

Oh dang, I forgot about the Big Chicken part of the meet. Re-send me the info and I'll post it up on front page, and maybe events section.

[marcos713]

^^i think it was something like :

Meet at the big chicken at 7:15ish, roll out to the V by like 7:40ish to meet up with the rest and then roll out to IA at like 8:15ish.. Sound right?

[steelmatt6]

^
Sounds pretty good! Whats not good is all the pollen :( ha

[CeOTiO8]

^^i think it was something like :

Meet at the big chicken at 7:15ish, roll out to the V by like 7:40ish to meet up with the rest and then roll out to IA at like 8:15ish.. Sound right?

GOSH... That's early I gotta pick up my home girl first then meet you guys out there.... Hopefully I'll have my phone on by this week tho

[allout13]

I knw n I still have a few things to fix on my car before then.....



I think so

whats wrong with it?


^^i think it was something like :

Meet at the big chicken at 7:15ish, roll out to the V by like 7:40ish to meet up with the rest and then roll out to IA at like 8:15ish.. Sound right?

pretty much so :goodjob:
maybe leave kfc a little earlier



^
Sounds pretty good! Whats not good is all the pollen :( ha

x2 I don't even want to wash my car because 30 minutes later it will be yellow :(


GOSH... That's early I gotta pick up my home girl first then meet you guys out there.... Hopefully I'll have my phone on by this week tho

yeah, but by meeting early we won't have to worry about traffic being an issue. better safe than sorry :dunno:

[steelmatt6]

^
Well? The only BAD thing I can think of is everyone who has high school kids ect, they will be getting back from their vacations on Sunday. I think no matter what time we leave, there is always going to be traffic...it's Atlanta. Lmao. But anyway

I'll try to make it to the big chicken part of the meet. Anyone know the exact address?

[allout13]

^
Well? The only BAD thing I can think of is everyone who has high school kids ect, they will be getting back from their vacations on Sunday. I think no matter what time we leave, there is always going to be traffic...it's Atlanta. Lmao. But anyway

I'll try to make it to the big chicken part of the meet. Anyone know the exact address?

thats what Im saying though
if we leave early and get caught in traffic, we'll still get to the V on time :goodjob:

12 Cobb Parkway Northeast, Marietta, GA

[steelmatt6]

^
Thanks chad!

BTW, lets search the amazing internet for an anit pollen/anti dust wax! it WOULD be nice

oh, and for those of you worried about the pollen on your Teg (or other car, ha) keep in mind that it is 1. abrasive 2. acidic and 3. needs to be removed "properly"

Lets say you wash your car Sunday or Saturday night. Get to the parking deck, and decide to dry wipe the car from any pollen that sticks to it on Sunday mornign. BAD IDEA. Pollen is abrasive, and can easily cause swirl marks, believe it or not. After continued exposure ofcourse. The best way is to just wash it as much as possible. Even with the season, it is still good to wash the car once every 1 or 2 weeks, because pollen is slightly acidic. I totally just read something about pollen and copied it here from memory. haha. I didn't know this 10 minutes ago. just my 2 cents

[steelmatt6]

K, so I updated the first page. If anyone looks at it anymore, lol. Hopefully that clears it up, and hopefully it is right.

[marcos713]

GOSH... That's early I gotta pick up my home girl first then meet you guys out there.... Hopefully I'll have my phone on by this week tho

lol dont be lazy! o btw , i went to andrettis monday night but i aint see you :thinking: i came in 1st and 3rd :D just saying lol


whats wrong with it?



pretty much so :goodjob:
maybe leave kfc a little earlier




x2 I don't even want to wash my car because 30 minutes later it will be yellow :(



yeah, but by meeting early we won't have to worry about traffic being an issue. better safe than sorry :dunno:

on my way to barret on friday somehow 2 my wheel studs broke off on the highway leaving me stranded on 1 stud...i had to get my car towed home. and the only way to replce studs on an integra is by pulling the hub so i went ahead and bought a new bearing and i found a place that does the job for stupid cheap compared to everywhere else. well i replaced 1 side and as i was checking the other side i noticed 1 was loose so i went to tighten it and SNAP goes that 1 :( so i had to get that side replaced to... FML..spent like 150 in 2 days...


bout the traffic, i dont remember there being any traffic last year. the highway was clear as can be..


^
Thanks chad!

BTW, lets search the amazing internet for an anit pollen/anti dust wax! it WOULD be nice

oh, and for those of you worried about the pollen on your Teg (or other car, ha) keep in mind that it is 1. abrasive 2. acidic and 3. needs to be removed "properly"

Lets say you wash your car Sunday or Saturday night. Get to the parking deck, and decide to dry wipe the car from any pollen that sticks to it on Sunday mornign. BAD IDEA. Pollen is abrasive, and can easily cause swirl marks, believe it or not. After continued exposure ofcourse. The best way is to just wash it as much as possible. Even with the season, it is still good to wash the car once every 1 or 2 weeks, because pollen is slightly acidic. I totally just read something about pollen and copied it here from memory. haha. I didn't know this 10 minutes ago. just my 2 cents

hmm interesting...i knew about it causing swirl marks but not that it was acidic..







pic of how my car is at the moment :(

[CeOTiO8]

lol dont be lazy! o btw , i went to andrettis monday night but i aint see you :thinking: i came in 1st and 3rd :D just saying lol


Nah I don't work there no more.... In the medical field now :goodjob: need CPR :gay:

BTW... Did you get the studs off already? And do you have air tools?

[marcos713]

Nah I don't work there no more.... In the medical field now :goodjob: need CPR :gay:

BTW... Did you get the studs off already? And do you have air tools?

oo thats wasup, more money for you! :goodjob: lol :gay:

yea i got them off, well actually i took my spindle to this shop on south cobb drive b/c they have to pull my hub off in order to get to them. why? u need some replaced?

[CeOTiO8]

oo thats wasup, more money for you! :goodjob: lol :gay:

yea i got them off, well actually i took my spindle to this shop on south cobb drive b/c they have to pull my hub off in order to get to them. why? u need some replaced?

Nah I was gonna help you with yours... I have to change like 2 studs but I'm gonna get the extended ones... Where you at tho I'm off and bored...

[marcos713]

Nah I was gonna help you with yours... I have to change like 2 studs but I'm gonna get the extended ones... Where you at tho I'm off and bored...

o 'preciate it but i already got it taken care of, just waiting for the shop to call me saying its done. i wanted to put some extended 1s to but i didnt want to wait 4days for shipping and possibly miss IA....im at school down the street from you lol, i would say lets hang out but i have class from 12-3

[CeOTiO8]

o 'preciate it but i already got it taken care of, just waiting for the shop to call me saying its done. i wanted to put some extended 1s to but i didnt want to wait 4days for shipping and possibly miss IA....im at school down the street from you lol, i would say lets hang out but i have class from 12-3

O iight cool... Well I'm thinking should I just wash the car today or just wait for the rain to help out... This pollen bs sucks

[marcos713]

O iight cool... Well I'm thinking should I just wash the car today or just wait for the rain to help out... This pollen bs sucks


ima just wait til sunday morning b/c i know if i wash it now its gonna be yellow again by tomorrow

[CeOTiO8]

ima just wait til sunday morning b/c i know if i wash it now its gonna be yellow again by tomorrow

IA is this Sat. right?

[marcos713]

IA is this Sat. right?

sunday

[CeOTiO8]

sunday

OOOO... I got the wrong day and shit... Yea that's a go for me then :goodjob:

[marcos713]

OOOO... I got the wrong day and shit... Yea that's a go for me then :goodjob:

lol cool cool. so whats all going on with your LS project?

[CeOTiO8]

lol cool cool. so whats all going on with your LS project?

It's OK... Still running the stock motor right now.. But I'm still building the Non V LS set up

[allout13]

on my way to barret on friday somehow 2 my wheel studs broke off on the highway leaving me stranded on 1 stud...i had to get my car towed home. and the only way to replce studs on an integra is by pulling the hub so i went ahead and bought a new bearing and i found a place that does the job for stupid cheap compared to everywhere else. well i replaced 1 side and as i was checking the other side i noticed 1 was loose so i went to tighten it and SNAP goes that 1 :( so i had to get that side replaced to... FML..spent like 150 in 2 days...


that sucks
I had to replace three studs when I got mine back


o 'preciate it but i already got it taken care of, just waiting for the shop to call me saying its done. i wanted to put some extended 1s to but i didnt want to wait 4days for shipping and possibly miss IA....im at school down the street from you lol, i would say lets hang out but i have class from 12-3

sounds like the shop is being lazy
since you had the spindle off for them, it shouldn't have take more than 15-30 minutes to replace the studs



OOOO... I got the wrong day and shit... Yea that's a go for me then :goodjob:

lol I thought it was saturday too until just the other day when I actually checked the calendar

[CeOTiO8]

Yea I would of been at the big chicken by myself lol.....

[marcos713]

that sucks
I had to replace three studs when I got mine back



sounds like the shop is being lazy
since you had the spindle off for them, it shouldn't have take more than 15-30 minutes to replace the studs




lol I thought it was saturday too until just the other day when I actually checked the calendar

how much did you pay to change them?

and yes they kind of were being lazy. everywhere i went said it would be an hr job or so and charging anywhere from 70-100 to do it. i payed 35.


Yea I would of been at the big chicken by myself lol.....
lol haha.

so are you going to meet us there or at the V? i know you said you were going to pick some1 up.

[allout13]

how much did you pay to change them?

and yes they kind of were being lazy. everywhere i went said it would be an hr job or so and charging anywhere from 70-100 to do it. i payed 35.


lol haha.

so are you going to meet us there or at the V? i know you said you were going to pick some1 up.

studs were like $1.35 each. my dad pretty much did the front studs for me, and I replaced one in the rear so free labor. :D
I would have helped out if I had known although you still would have had to take the hub to a shop to get the bearing pressed :dunno:

[CeOTiO8]

how much did you pay to change them?

and yes they kind of were being lazy. everywhere i went said it would be an hr job or so and charging anywhere from 70-100 to do it. i payed 35.


lol haha.

so are you going to meet us there or at the V? i know you said you were going to pick some1 up.

IDK yet... Idk if she's gonna go to church or not... I will know for sure by tonight...

[kingme1st]

Whats good ...new to the site..looking to get the whip up to date with some parts and various things...i ride a 93 Integ...looking to get possibly get down..or even get some pointers..hit me up!

[allout13]

Whats good ...new to the site..looking to get the whip up to date with some parts and various things...i ride a 93 Integ...looking to get possibly get down..or even get some pointers..hit me up!

I'm not sure what you've read in this thread, but we are trying to get a bunch of integras up to roll out to Import Alliance this sunday. Details are on the first page. Hope to see you there.
Oh yeah, and lets see some pics!

[CeOTiO8]

2 more days hoe.... Hey quick question.... Since I dont have rims, should I just get some hub caps?

[steelmatt6]

2 more days hoe.... Hey quick question.... Since I dont have rims, should I just get some hub caps?

Up to you! You can always paint em?

2 more days :)

[allout13]

2 more days hoe.... Hey quick question.... Since I dont have rims, should I just get some hub caps?

youre running steelies? paint them bishes up either neon green or hot pink :goodjob:

[CodeRED-MVBC]

i agree with the DC squad if it counts. not a bad idea we have 3 of em in out crew. p.m. my profile if yowl seriously wonna ride out on this idea. were distant DC supporters. loll

[marcos713]

Less than 2 days away!! Gota vacuum my car and get it looking good!
Just a quick roll call, who all is planning on meeting at the big chicken?

[allout13]

Less than 2 days away!! Gota vacuum my car and get it looking good!
Just a quick roll call, who all is planning on meeting at the big chicken?

:look:

[marcos713]

^^ I see nothing lol

[steelmatt6]

^^ I see nothing lol

I'll prob. be there

[1CleanEg]

damn, i need to start hanging out with the integra's man, cant make IA this sunday tho.

[steelmatt6]

^
Hope you can make it to an event soon!

Dang it! I have to work tonight. I'll be washing the car either at 12 tonight or 4 in the morning...lol, curse you pollen!

[allout13]

^^ I see nothing lol

:look: i be dur

[steelmatt6]

hmm. If I get lost, I am hoping i'll be able to spot a big chicken....lol. Haven't been in Marietta in awhile. See you guys there at 7:15 sharp. Or earlier

[steelmatt6]

Great meet! Glad almost everybody came to the event.

Time for 12 hours of sleep....haha

[teh_mugen18]

^^^^^^lol def THIS!! me, i didnt even get a chance to sit down and eat until at least 3pm!! Too much action packed into a few short hours

[getty1582]

im down for a DC squad

[CeOTiO8]

GLAD TO MEET YOU HOES!!!!!

[steelmatt6]

GLAD TO MEET YOU HOES!!!!!

LOL, X2

[steelmatt6]

Thanks again to Top Notch for Hosting a Great Carshow!

Now C'mon you teggers, come out and support Relay for Life at the ASAP carshow April 25th! Info is on the first page

[getty1582]

I wont be able to make it but hey I made it to diggers last sunday

[steelmatt6]

Where did everybody go, holla!

[youngmill]

DC squad????????????????? IM IN

[allout13]

im down for a DC squad

glad to see you finally made it over to IA :goodjob:


Where did everybody go, holla!

lol

[marcos713]

DC squad member ?? Reporting lol.

On a side note: chad do we have a test 2moro in chem?

And......some1 buy my tein springs!! :D I need funds for some wheels and my oem internals :ninja:

[marcos713]

Fml ...

[marcos713]

Dammit

[allout13]

DC squad member ?? Reporting lol.

On a side note: chad do we have a test 2moro in chem?

And......some1 buy my tein springs!! :D I need funds for some wheels and my oem internals :ninja:

my bad lol, I was asleep by 10:45 :dunno:

I tried to convince myself that we didn't really have a test today. Then I showed up to class and was surprised that we did even though I already knew that we were having it. :crazy:

:ninja: what wheels are you looking to get now?

[marcos713]

my bad lol, I was asleep by 10:45 :dunno:

I tried to convince myself that we didn't really have a test today. Then I showed up to class and was surprised that we did even though I already knew that we were having it. :crazy:

:ninja: what wheels are you looking to get now?

Lol its cool.

Yea same here. I was trying to convince myself that he forgot about exam5 but I knew in the back of my mind he hadn't. I went over some stuff in the morning before class. I was kinda mad that the asians infron of me were using their last lab on the test which had all the lewis diagrams on it and kang walked up beside them and didn't say anything.

Nothing special, just some 16inch black slips w/ neogens. I'm getting them for a good deal so I'm trying to save up before they are sold...

[allout13]

Kang should give us extra credit for being the only two people dedicated enough to show up to recitation. Hell, I'm not even supposed to be in the wednesday recitation. lol

[steelmatt6]

Ah, I remember Chem class last year. I made an A in lab! but a C in the main class. oh well

[marcos713]

Kang should give us extra credit for being the only two people dedicated enough to show up to recitation. Hell, I'm not even supposed to be in the wednesday recitation. lol

Lol he should but we both know he's not going to. O really?? So u just go for extra credit or wat?

[allout13]

Lol he should but we both know he's not going to. O really?? So u just go for extra credit or wat?

yeah, but maybe if were close to having a higher letter grade 79 or 89 then he'll bump it up for us. Nah, I just dont feel like going to the friday recitation lol

[steelmatt6]

http://ncsmokycabins.com/Pictures/AA-Deal%27s%20Gap.jpg

see da first page!

[allout13]

hay u gaiz!

[steelmatt6]

Waz up! Fo shizzle

[allout13]

http://rimtuck.com/photos/1249510070.jpg

[steelmatt6]

that's a very clean black teggy

[gforce71]

the stickers ruin it for me...

[steelmatt6]

the stickers ruin it for me...

Well, IMHO, no stickers, maybe smaller rims and fatter tires, but clean overall. Is that a JDM front? Looks like it from the rear pic

[allout13]

didn't post the front because I don't like the hoodpins
http://rimtuck.com/photos/1249510029.jpg

[steelmatt6]

We need an Integra meet pretty soon :ninja:

[marcos713]

We need an Integra meet pretty soon :ninja:

Yeaaa we dooooo!!! :goodjob:

[allout13]

teg meet is long overdue :goodjob:

[steelmatt6]

Here are the ideas I had in mind for an Integra meet in June:

*1. Integra Varsity Meet In Atlanta (i'll need to get permission from the owner)
*2. Eastside Pizza Meet in Alpharetta (Like Before)
3. Lake Lanier Cook Out Meet (Lake Lanier Islands, everyone pitches in)
4. Gwinett Integra Meet at Moes
5. Andretti Event ($22 a race, game prices vary)
*6. Integra Meet at the Big Chicken in Marietta
7. Kennesaw State Parking Deck Integra Meet
8. Barrett Parkway Meet at Starbucks
9. GA Dome Parking Deck Integra Meet In Atlanta
*10. Runaround Sues Meet in Marietta on Full Throttle Thursdays (Meet up first, then roll to show)

So, those are the ideas! The ones with a star beside them are likely to have more success IMO

[allout13]

Here are the ideas I had in mind for an Integra meet in June:

*1. Integra Varsity Meet In Atlanta (i'll need to get permission from the owner)
*6. Integra Meet at the Big Chicken in Marietta
7. Kennesaw State Parking Deck Integra Meet
8. Barrett Parkway Meet at Starbucks
*10. Runaround Sues Meet in Marietta on Full Throttle Thursdays (Meet up first, then roll to show)

So, those are the ideas! The ones with a star beside them are likely to have more success IMO

those would be good for me
maybe the lake cookout if it was a different lake lol

[steelmatt6]

Maybe a lake cookout if it was a different lake. Well sure! Y'all just come up here to Lakearrowhead, AND MAKE THE DRIVE! DO IT! lol

But seriously, besides that, what is second choice?

[allout13]

Maybe a lake cookout if it was a different lake. Well sure! Y'all just come up here to Lakearrowhead, AND MAKE THE DRIVE! DO IT! lol

But seriously, besides that, what is second choice?

arrowhead is only 22 miles from me. thats WAY better than Lanier lol
Im a big fan of Allatoona myself

[marcos713]

Here are the ideas I had in mind for an Integra meet in June:

*1. Integra Varsity Meet In Atlanta (i'll need to get permission from the owner)
*2. Eastside Pizza Meet in Alpharetta (Like Before)
3. Lake Lanier Cook Out Meet (Lake Lanier Islands, everyone pitches in)
4. Gwinett Integra Meet at Moes
5. Andretti Event ($22 a race, game prices vary)
*6. Integra Meet at the Big Chicken in Marietta
7. Kennesaw State Parking Deck Integra Meet
8. Barrett Parkway Meet at Starbucks
9. GA Dome Parking Deck Integra Meet In Atlanta
*10. Runaround Sues Meet in Marietta on Full Throttle Thursdays (Meet up first, then roll to show)

So, those are the ideas! The ones with a star beside them are likely to have more success IMO

hmmm instead of lake lanier how about red top mt or allatoona?

as for an andrettis meet, on mondays its 13/race. the price went up a little ahile ago. regular price is 26/race i believe. i still go on mondays with my friends b/c its free games after like 9pm or 10pm. if you under 21 you pay $10 to get in. if your 21+ its free to get in.

in my opinion there are already enough meets at the starbucks on barret...

the parking deck meet at KSU never works out b/c the cops always break it up..

and the parking lot at the big chicken is kinda small. we could have it across the street at the Checkers parking lot or at the Sonics....

there is a teg GA dome parking deck meet? or would that be us ?


just my input......... :dunno:

[steelmatt6]

Alright, I appreciate all the input.

I am also really close to Allatoona! That would be fun. We have had enough east side meets; west side!

Now this is just an idea, but we could all meet up at a nearby store in Acworth or closer, then caravan to the Park Marina. If this is a good idea, I will see what the cost will be

http://www.lakeallatoona.info/images/stories/lake-allatoona-marinas.png

[allout13]

there isn't much going on at park marina unless we're getting a boat. there are a few other places around the lake like coopers furnace that would be better IMO

and we probably ought to start a new integra meet thread in the meet section to get more input than just from the three of us lol
more traffic too

[steelmatt6]

well yeah, I new thread will be started ofcourse. Once the details are 50% worked out.

We'll find a place!

[steelmatt6]

hokay, so a poll is up in the events section :)

[allout13]

http://rimtuck.com/photos/1242458282.jpg

[allout13]

hope to see some of you guys at the meet