1988 Mustang GT $5500 OBO (Foley Alabama)

[MStartley]

SOLD!!!!!!!




Built 306
Built and regeared transmission
SVT Rear End 3:55 Posi (Have 4:10 with install kit)
Car has less than a mile on motor and trans

Divorce forces sale.
Have over 12k invested

(251) 550-7753
Ask for either John or Matt, call anytime. If unanswered, leave message. Call will be returned shortly.

Many extras, too much to list.

Call to view car, serious inquiries only.
No Joyrides
Shipping arrangements can be made for little to no extra cost.
Trades + Cash will be considered


sorry about crappy looking pictures, all I have at the moment.
http://i4.photobucket.com/albums/y110/startley85/034.jpg
http://i4.photobucket.com/albums/y110/startley85/035.jpg
http://i4.photobucket.com/albums/y110/startley85/032.jpg
http://i4.photobucket.com/albums/y110/startley85/031.jpg
http://i4.photobucket.com/albums/y110/startley85/030.jpg

[Bigt8aford]

I did catch a price, vin, or pictures of work done to teh automobile?

[Barefoot]

your description is so detailed it makes me want to go right out an buy it.

[Burnz1one]

failure

[MStartley]

well, started this thread just to see if there was any interest at all in this car before I took the time to write down all of the info.

The good (mods):


MOTOR
306ci roller 302
GT40P heads Ported on exhaust side
New valve stem guides and seals
3 Angle valve job
Ford racing GT40P specific headers
New BBK H pipe
New Melling High Volume Oil pump
New ARP Oil Pump Driveshaft
New ARP Connecting Rod Bolts
New ARP Main Bolts
Clevite 77 Cam, Rod, Main Bearings
Balanced Rotating Assembly
Forged Pistons
Stock Crank and Rods (new)
Trick Flow Cam and Matching Valve Springs
New push rods
New roller rockers
New double roller timing chain
New chrome oil pan
New Trick Flow valve covers (black)
New Pro Billet MSD Ignition
New Ford Racing Spark Plug Wires
New coil
Ford racing mass air conversion with 1993 cobra cpu
New CNL 80 mm Mass Air Meter with matching 30lb injectors
New ford racing 70 mm throttle body
New ford racing 70 mm EGR plate
Aftermarket polished aluminum upper and lower intake
New Walbro 255 lph fuel pump
New Mallory adjustable fuel pressure regulator
All new Gates cooling and heater hoses
March polished billet underdrive pullies
New Dayco serpentine belt
3 core radiator with electric fan and original fan shroud
New water pump, thermostat, spark plugs, motor mounts
New alternator and interstate battery


Transmission
Newly rebuilt T5 with 1st 2nd and 3rd regear mod
Input Shaft upgrade
New synchros
New BBK short throw shifter
Aluminum Driveshaft


Suspension and wheels
South Side upper and lower control arms
Eibach rear drag springs with airbags
SVO/SVT posi disc brake rear end 4 lug with 3:55 gears and a set of ford racing 4:10s in the box included with sale.
New Wilwood Rear disc brake proportioning vave
17'' Chrome Cobra R staggered wheels 17x9 front 17x10.5 rear with brand new Kuhmo Ecsta tires


Body
straight with no rust
brand new crystal clear head lights and GT fog lights
New bulbs all the way around
Matte Black Paint job for street sleeper look



THE BAD!:
Needs Center console and A pillar covers
WAY too loud for streets, must have exhaust system completed.
AC probably needs charged
Needs flexible brake line from car to rear axle (12" at most)
Emergency brake lines need to be hooked up
Aftermarket autoguage tach with shift light needs to be hooked up


Less than a mile on motor and trans. Got her running, and drove her next door for a tune and thats where she sits.


Will edit original post and add more pics.



VIN # will be availiable for SERIOUS buyers only.

[B18c1Turboed]

I was raised in Foley. I go there about twice a month to visit my daughter. God i hate that place.....A 5 hour drive for nothing.... :(

[MStartley]

how old is she?

[B18c1Turboed]

how old is she?

12 and u will get shot!

[MStartley]

just checkin if i knew her...

[B18c1Turboed]

just checkin if i knew her...
Nope, do u know the Ranes family? they really big into racing ( well till he went too jail). Tom had a yellow turbo mustang
http://www.skinnykidracecars.com/gallery2/d/3658-5/IMG_0066.jpg

[Glides]

Not a bad deal at all for that. Specially being a GT body. Good luck with sale man.

[Barefoot]

well, started this thread just to see if there was any interest at all in this car before I took the time to write down all of the info.

The good (mods):


MOTOR
306ci roller 302
GT40P heads Ported on exhaust side
New valve stem guides and seals
3 Angle valve job
Ford racing GT40P specific headers
New BBK H pipe
New Melling High Volume Oil pump
New ARP Oil Pump Driveshaft
New ARP Connecting Rod Bolts
New ARP Main Bolts
Clevite 77 Cam, Rod, Main Bearings
Balanced Rotating Assembly
Forged Pistons
Stock Crank and Rods (new)
Trick Flow Cam and Matching Valve Springs
New push rods
New roller rockers
New double roller timing chain
New chrome oil pan
New Trick Flow valve covers (black)
New Pro Billet MSD Ignition
New Ford Racing Spark Plug Wires
New coil
Ford racing mass air conversion with 1993 cobra cpu
New CNL 80 mm Mass Air Meter with matching 30lb injectors
New ford racing 70 mm throttle body
New ford racing 70 mm EGR plate
Aftermarket polished aluminum upper and lower intake
New Walbro 255 lph fuel pump
New Mallory adjustable fuel pressure regulator
All new Gates cooling and heater hoses
March polished billet underdrive pullies
New Dayco serpentine belt
3 core radiator with electric fan and original fan shroud
New water pump, thermostat, spark plugs, motor mounts
New alternator and interstate battery


Transmission
Newly rebuilt T5 with 1st 2nd and 3rd regear mod
Input Shaft upgrade
New synchros
New BBK short throw shifter
Aluminum Driveshaft


Suspension and wheels
South Side upper and lower control arms
Eibach rear drag springs with airbags
SVO/SVT posi disc brake rear end 4 lug with 3:55 gears and a set of ford racing 4:10s in the box included with sale.
New Wilwood Rear disc brake proportioning vave
17'' Chrome Cobra R staggered wheels 17x9 front 17x10.5 rear with brand new Kuhmo Ecsta tires


Body
straight with no rust
brand new crystal clear head lights and GT fog lights
New bulbs all the way around
Matte Black Paint job for street sleeper look



THE BAD!:
Needs Center console and A pillar covers
WAY too loud for streets, must have exhaust system completed.
AC probably needs charged
Needs flexible brake line from car to rear axle (12" at most)
Emergency brake lines need to be hooked up
Aftermarket autoguage tach with shift light needs to be hooked up


Less than a mile on motor and trans. Got her running, and drove her next door for a tune and thats where she sits.


Will edit original post and add more pics.



VIN # will be availiable for SERIOUS buyers only.way better

[MStartley]

Not a bad deal at all for that. Specially being a GT body. Good luck with sale man.


yeah ...it was suppose to be a budget build...but there was nothing budget about it...i built it to play with....the motor is surprisingly very very responsive....i think that i out did myself this time....still working on the final tune....the car has less than a mile on the build....it's a shame i came into some hard times...and got to let it go...i just hope she goes to a good home and she is driven hard and represent american muscle....wild and free..


B18c1Turboed:
did they used to have a white convertible that was quick?...other than that it sounds familiar...

[MStartley]

NEW PRICE! 24 HOURS ONLY!

$4500 THROUGH 12PM MONDAY!

You won't find a better deal on a car like this.

[MStartley]

Bump for one day price through midnight tonight!

[MStartley]

Bump... still for sale!

[MStartley]

how many times today am I going to have to bump this thing?

anyway, BUMP for a RUNNING CAR!

got the fuel relay fixed, heading to the auto parts store to try to find some cheap mufflers and the brake line for a COMPLETE RUNNING CAR! NO ISSUES WHAT-SO-EVER!

Only thing left to do is center console and a pillar covers then she's 100%!!!!

[Barefoot]

how many times today am I going to have to bump this thing?hopefully just once so comply with the bumping rule

[MStartley]

Ah crap... maybe I should delete some of my earlier bumps... lol

I should be done for the day anyway. Thnx

[SouthSide Tay]

12 and u will get shot!
loving father coming out :fire:

[MStartley]

loving father coming out :fire:

ha ha, no doubt!

car is still for sale.

been driving her for the past week, so now she has nearly 60 miles, and pulls HARD. 4:10s will be installed soon.

thought about taking her out to the track tonight to get some vid, but got rained out. I'll have vid posted maybe this time next week if not sold.

[MStartley]

It's been a while, I thought I was asking a relatively low price for the car considering what it is, but no bites... I can't eat a mustang, so I'll take $3,500 bottom dollar. If interested, please email, or PM. The email is [email protected]

I hate to do this, but you gotta do what you gotta do. Thanks guys.

[MStartley]

getting really hungry in these times... any takers for $2500 cash?

[Ruststang]

damn thats a good price.

[MStartley]

well, car is gone. Thanks guys!