H2B Adaptor plate H22 F22 into EG

[spooled]

Laser machined adaptor plate and crank spacer for the H22B or F22A4/6 swap into an EG.

$200 obo Sorry no trades!

*** PM me if you have any questions. *** You can also text me at 404-438-8839. I can only send/receive texts.

Material is High tensile strength Mild Steel on both. Just to mention a few things, you need:

B16 transmission
B16 flywheel
Mounting hardware
b16 trans mounts, rear engine/trans mount
Half shaft mount (I dont have another one but I can make you one easily for a small fee of course :D ).

Some minor machining required to get the driver's side axle to work, so do your research. Pm me if you have any questions. I made an extra for my swap I dont need. I have one for a H2D or F2D swap also (H22, F22 engine D series trans). I only have one but I can make at least one other for the D series transmission if interested.

http://i260.photobucket.com/albums/ii5/246-Garage/h-1.jpg
http://i260.photobucket.com/albums/ii5/246-Garage/s-1.jpg
http://i260.photobucket.com/albums/ii5/246-Garage/h-10.jpg
http://i260.photobucket.com/albums/ii5/246-Garage/h-6.jpg
http://i260.photobucket.com/albums/ii5/246-Garage/h-7.jpg

[BIGWADE]

bump good price!!!

[Drummerboy]

hmm, use this as a bump, but i've seen these around. the whole H2B and what not, but...what is it? engine to tranny matching or head to block?

[NoWAyItZTOMmY]

engine to tranny

[J-ROCK]

i may be interested in this! let me see what my funds look like when i get paid and ill let you know

[spooled]

thanks all.

bump...h22 f22 engines to b16 trans adaptor

[TheChosenOne]

So you made this, or is this from either the QSD or EVO kit?

[Turbodude06]

Good deal:goodjob:

[spooled]

So you made this, or is this from either the QSD or EVO kit?

I made the adapter myself. I used cad/cam software and an industrial laser i repair locally for a friend of mine. I instruct on, install and repair industrial lasers as my profession. I have a friend with a shop and he let me use his h22 and gsr transmission to test the fit of the plate.

I'm using mine for an f22 swap into my coupe with gsr transmission.

[xdavidscenex]

pm'd.

[Motivation]

Good seller! Thanks man.

[ls-r teg]

since you make ur own kits wanna make me a b2k kit:ninja:

[Turbodude06]

since you make ur own kits wanna make me a b2k kit:ninja:

b2K? would that even work there reversed from each other?:thinking:

[ls-r teg]

b2K? would that even work there reversed from each other?:thinking:

it was a joke dude :lmfao:

[cowartbrian]

bump

[UmbrellaHead]

I am interested can you send me info on a PM I have sent you one already.

[spooled]

I have 2 more sets available of the H2B adapter and flywheel spacer. Txt me at 404-438-8839

Thanks.

[AyO Deebo]

dam if i was to go h2b i would jump on this and lol @ the b2k BUMP BUMP BUMP

[Jenson]

Just curious why in the world you made the pate out of steel??? So heavy. Have you found a good source for the flywheel bolts or adaptor plate bolts? Im just about to the point of calling ARP and having them make me some flywheel bolts...or making them myself. I'm making my own kit as well. And FWIW, that flywheel spacer needs some more machining to work properly.

[NoWAyItZTOMmY]

^ you should be able to buy the bolts from ARP.

[Jenson]

^Thats what I figured, I'll give them a call monday. The C/S head plate bolts are just as hard to find...

[spooled]

Bump H2B steel adapter plate and crank spacer $200.

http://i260.photobucket.com/albums/ii5/246-Garage/h-1.jpg
http://i260.photobucket.com/albums/ii5/246-Garage/s-1.jpg

Thanks.

[spooled]

bump

[UmbrellaHead]

Are these still available I have been out of the country and need one now that I am back??

CAM

[jesus bonill]

BUMP,
do you still have the adapter plate??
my buddy needs it, ill come pick it up if you still have it...

[Motivation]

^^^ Buy mine. It is THE EXACT ONE that is in this guy's thread... I bought it from him.