fs/ft etd traction bar

[4looks]

this is a repost i need to sell got a ticket need to pay it. i have a set of etd traction bars there 4 a eg an ej honda civc 92-95.im asking 100 now bc there 325 new. trade offers: gsr blades, phat 5s, a 92-95 coupe hood an money.or just lmk what u got. hit me up at (423)435-1271

http://i737.photobucket.com/albums/xx18/4lookscoupe/0707091017a.jpg
http://i737.photobucket.com/albums/xx18/4lookscoupe/0707091019a.jpg
http://i737.photobucket.com/albums/xx18/4lookscoupe/traction1-1.jpg
http://i737.photobucket.com/albums/xx18/4lookscoupe/traction.jpg :bump: :boobies:

[jadakid88]

i call dibs...

[4looks]

1st person to bring me the money the get em

[jadakid88]

so whats good are you gonna come down here or what i have the cash in hand

[TheTremor]

Traction bars for a 88-91 civic will not fit a 90-93 Integra they bolt up different and an Interga is a little bit wider. So which car was the traction bars on Civic or Integra?

[jadakid88]

hmm interesting...

[cardesignz]

Traction bars for a 88-91 civic will not fit a 90-93 Integra they bolt up different and an Interga is a little bit wider. So which car was the traction bars on Civic or Integra?

I was about to ask the exact same thing. I can confirm that there is no way they are going to fit both.

[jadakid88]

good info and with this in consideration if they are for a da integra then considered them sold, if not gl on sale
I was about to ask the exact same thing. I can confirm that there is no way they are going to fit both.

[TheTremor]

I think these are for a DA because i have a set of EDT traction bars on my 90 Civic HB and it don't have the backet for the front tranny mount. But with these puppys NO WHEEL HOP at all. I love my traction bars!!!

[gen2freak]

I think these are for a DA because i have a set of EDT traction bars on my 90 Civic HB and it don't have the backet for the front tranny mount. But with these puppys NO WHEEL HOP at all. I love my traction bars!!!

the front mount has nothing to do with it!!!
its the actual size, so yeah you need to find out first, before you sell what kinda car is it for.

[bpoweredhatch]

ok i talked to the guy i got them from he said they must be for a old school hatch because it made his wheels move back and forth on his 93 teg. but he was told they were for a 92-95 civic which is what i was told

[4looks]

no they will fit either one

[cardesignz]

They will NOT fit both.

[jadakid88]

still want to know

[Vteckidd]

if you let me mount them on my CRX and they fit i will buy them

[Berta]

looks like they would fit a 92-95 civic/ 94-01 teg. Look at the torsion bars. It has a hines joints on bothe ends. Not the flat 2 bolt flange end to fit the da or old skool civic lca's.

[cardesignz]

looks like they would fit a 92-95 civic/ 94-01 teg. Look at the torsion bars. It has a hines joints on bothe ends. Not the flat 2 bolt flange end to fit the da or old skool civic lca's.

No, all of them are made that way, but it does look like he is missing the brackets for that end. It looks like either a DA or EF bar (more like a DA). I think the DA crossmember is wider than the the EF one. You can't mount one on the other, and it should be very obvious what it fits if you measure or try to put it on one. I have a Full-Race traction bar on my DA, so if someone wanted to post up a measurement, I could compare it with mine.

http://www.etdracing.com/store/index.php?cPath=11

[4looks]

im just going by what etdracing.com said

[TheTremor]

No, all of them are made that way, but it does look like he is missing the brackets for that end. It looks like either a DA or EF bar (more like a DA). I think the DA crossmember is wider than the the EF one. You can't mount one on the other, and it should be very obvious what it fits if you measure or try to put it on one. I have a Full-Race traction bar on my DA, so if someone wanted to post up a measurement, I could compare it with mine.

http://www.etdracing.com/store/index.php?cPath=11

I think Berta is right. Cause traction bars for a DA or EF bolt up right back up to the stock front crossmember location. These if you look at them right bolt up where the tow hooks bolt up to, DA and EF's traction bars don't bolt up there like 92-95 civics or 94-01 integras.

[cardesignz]

I think Berta is right. Cause traction bars for a DA or EF bolt up right back up to the stock front crossmember location. These if you look at them right bolt up where the tow hooks bolt up to, DA and EF's traction bars don't bolt up there like 92-95 civics or 94-01 integras.

EG's and DC's don't have a front transmission mount (the DA one is the only one on ETD's site with one pictured). The DA and EF do use the tow hook mounting points (as does my Full-Race bar), but this is also probably an earlier version of the ETD bar that did not use the stock crossmember mounting points.

[Vteckidd]

dude, bring it to MAINSTREAM and if it fits my CRX i will buy it.

Otherwise no one is going to by traction bars that they have no fucking clue what the fit

[TheTremor]

dude, bring it to MAINSTREAM and if it fits my CRX i will buy it.

Otherwise no one is going to by traction bars that they have no fucking clue what the fit

Yeah i'm with Vteckidd take it to him, he can find out what there for.

[marcos713]

^x2

[4looks]

ANY1 THAT BRINGS ME A 100 CAN HAVE EM NEED MONEY 4 TICKET :boobies: :bump:

[k3tsurui]

Those are EG's....I am 100% sure...I saw them get taken off of one by a fat Egyptian kid, lol

[4looks]

thanks some one bring me a 100 an they will have em a set of traction bars. thanks 4 lookn :D

[jadakid88]

damn thats a great price but i wanna know if they are for a da or not
thanks some one bring me a 100 an they will have em a set of traction bars. thanks 4 lookn :D

[k3tsurui]

they will not fit the da.....only eg ek or dc

[4looks]

yo there 4 a eg an a ej. :rolleyes:

[4looks]

oh yeh ek to

[cardesignz]

If that's what is for, why does it have a cable transmission mount? Also, do you have the brackets to mount it to the control arms?