PDA

View Full Version : Power Mods Need Help identifying Turbo


96Plumls
07-11-2009, 04:29 PM
I was told that the turbo was a T04e 60 trim
- but I think it's a T04s
- the cold side is a .60 AR and the Exhaust Housing shows .70 AR
- and in between there is a Y4 stamp in the middle

http://i533.photobucket.com/albums/ee335/roclark07/HPIM1028.jpg

http://i533.photobucket.com/albums/ee335/roclark07/HPIM1030.jpg

http://i533.photobucket.com/albums/ee335/roclark07/HPIM1031.jpg

http://i533.photobucket.com/albums/ee335/roclark07/HPIM1033.jpg

http://i533.photobucket.com/albums/ee335/roclark07/HPIM1034.jpg
96Plumls
07-11-2009, 06:11 PM
Anyone know?
AFSil80
07-11-2009, 07:35 PM
Is there any sort of metal I.D. plate on the center section?
96Plumls
07-11-2009, 09:45 PM
No metal id tag
Batlground
07-13-2009, 10:45 AM
It looks like a to4e cover and its a journal bearing. It appears to be a t4 turbine housing but it may be the pictures. You can measure the distance between the bolt holes to see if its t4 or t3. If you take off the housings and measure the inducer and exducer of the turbine and compressor wheel it will be easier to find out what it is.
96Plumls
07-13-2009, 12:20 PM
Ok I thought that it may be a T04e but stock non modified T04e highest trim is a 57, Thanks also +1
Batlground
07-14-2009, 01:31 PM
Ok I thought that it may be a T04e but stock non modified T04e highest trim is a 57, Thanks also +1

If you take off the wheels and measure them you can tell what trim it is. The markings on the housings are not trim they are a/r. Thats the area of the scroll versus the radius.
96Plumls
07-14-2009, 06:49 PM
I know that isn't the trim , but I thought i saw somewhere that it doesn't come in a 57 trim