civic-r11
07-10-2009, 07:39 PM
I have 2 ls blocks that I am trying to sell.. I have one B18A1 that has exactly 973 miles on it! This block has a kms block guard installed my ewing machine shop and done correctly(not hammered in). The block is also bored .20 over with Arias low compression pistons( 9:2:1 compression on the pistons). The Block has be hot tanked bored and cleaned. The Block DOES NOT COME WITH CRANK, rods, golden eagle sandwich plate, or the act flywheel in the pics, and no oil pump or the water pump The i hade acl bearings in the block and they will come will it too.. The reason why i took it out of the my car is because i got a 2.0l gsr that i am putting in the car now.. But the block is in perfect condition and is ready to go..
Block Code= 3328098
$400 for block and pistons or best offer.. just shoot me what you got to offer
The second block is a b18A1 also but it is a bare block that is hot tanked, bored .20 over, honed, and cleaned up... I have hade it for a while but i don't need it any more.. as you can see.. it is still in the packaing..
Block Code=1325484
$120 for the block
I am in the market for hondata s300 with boost by gears, tial 50 bov, valves for a b16 head(aftermarket), avid or innoactive motor mounts( they have to be stiff mounts), and some 3inch exhaust..
pm me if interested
Block Code= 3328098
$400 for block and pistons or best offer.. just shoot me what you got to offer
The second block is a b18A1 also but it is a bare block that is hot tanked, bored .20 over, honed, and cleaned up... I have hade it for a while but i don't need it any more.. as you can see.. it is still in the packaing..
Block Code=1325484
$120 for the block
I am in the market for hondata s300 with boost by gears, tial 50 bov, valves for a b16 head(aftermarket), avid or innoactive motor mounts( they have to be stiff mounts), and some 3inch exhaust..
pm me if interested