PDA

View Full Version : TW/FT: almost fresh EG8!! :::sedancontent:::



six7teen
06-25-2009, 10:20 AM
Please Close Thread! Thanks IA!






Well, i dont really wanna sell, but i just wanna see what else is out there! Ive had this car since September and it has never failed me!! Most reliable car i've ever own... Lookin Mostly for Trades! open to anything!!

Make: Honda
Model: Civic sedan DX
Year: 1992
VIN#: JHMEG8648NS040332
Mileage: Chasis-2xx,xxx miles
Motor- 75,xxx Kilometers
Title: Clean and in hand



http://i325.photobucket.com/albums/k374/six7teen/0625092.jpg



Motor/ under the hood

JDM ZC with approximately 85,000 KILOMETERS..
USDM ex hydro transmission
motor vin: 2033462
Trans Vin: S40- 1292534
Mishimoto Radiator hoses
Air Conditioning & Power Steering!
Unknown brand intake
Oil just changed less than 100 kilometers ago
Leaks no oil and smokes NONE!
dual bend short shifter
Competition Stage 3 Clutch
NGK plugs and wires
Battery was bought less than a month ago
Urethane Auto-to-Manual Conversion mount (car used to be auto)
good- This is the MOST reliable motor ive ever driven... (not the fastest by any means though)
urethane shifter bushing
bads- throw out bearing makes slight noise
Exterior

Fresh paint!
Mugen style Urethane Front Lip
Mugen style Rear Lip
EK side skirts
Window Visors
Spoon style mirrors
JDM Stanley side markers
JDM ferior sir Stanley corner lights
6k high/low beam HIDs
JDM style fog lights
New taillights
JDM antenna block off plate
lots of stickers!
good- I love the look of this car! i get comments a lot about it as well!! BUT, of course, beauty is in the eye of the beholder..
bads- car was in minor fender bender in the front (see pictures), so the lip is now wrapped and bumper has minor damage.. also missing two trim pieces.. (pictured below)
Interior & Sound

Mostly stock
EK center console
JDM ferior sir gauge cluster (amber lights and KPH)
black steering wheel instead of grey (no wrecks, old wheel was just in poor condition)
Sparco foot pedal covers
Civic (coupe) floormats can be included
LED dome light
AIOWA CDplayer/ Headunit
Audiobahn 6.5" speakers
Alarm system with WAY too many sirens!! (works great though)
good-Very cozy and roomy (being a 4dr and all).. best part i the cupholders with the ek center console!! i have no problem fitting 2 large mickey D's sweet teas without them spilling
bad- minor rips in front seats and 1 in rear
Wheels & Suspension

15" Polished Slips..
195/50/15 Hankook Radial Tires w/ 90% all around
Motegi LugNuts
Front Neuspeed Strut Bar & Rear Strut Bar
Rear 24 mm Progress (fully adjustable) sway bar and front sway bar
urethane sway bar bushings
Full camber kits all around
Skunk2 style Rear LCA's
unkown coilovers (ride decent.. especially for being slammed)
good- this car handles unbearable good! i have many people on here (misunderstood) that can vouch for how tight this car is around a curve
bad- might need to be raised up a little?
Exhaust

Apexi GT Spec 2 2.5" catback...
stock Cat
high flow cat (will be replacing with a stock one soon)
Good- exhaust sounds absolutley amazing!! no raspyness at all
bad- currently a little loud, but will be swapping cats soon
Brakes

Front and rear Integra Hub assembly
New front drilled and slotted rotors/ new pads
New rear rotors/ pads
Integra Proportining Valve/ Brake Master Cylinder
good-stops on a dime
bads- none
in sure im forgetting something or another, so i will definitely constantly update this with anything i might remember or with extra pics.. here is a good reference thread as well..
http://www.importatlanta.com/forums/showthread.php?t=212737&page=1&pp=20 (http://www.importatlanta.com/forums/showthread.php?t=212737&page=1&pp=20)


Price is set at $5,500.
again, i am testing waters and looking mainly for trades!


onto some pics!!


http://i325.photobucket.com/albums/k374/six7teen/06250924.jpg

http://i325.photobucket.com/albums/k374/six7teen/06250925.jpg

http://i325.photobucket.com/albums/k374/six7teen/06250927.jpg

http://i325.photobucket.com/albums/k374/six7teen/0625095.jpg

http://i325.photobucket.com/albums/k374/six7teen/0625097.jpg

http://i325.photobucket.com/albums/k374/six7teen/0625098.jpg

http://i325.photobucket.com/albums/k374/six7teen/0625091.jpg

http://i325.photobucket.com/albums/k374/six7teen/06250912.jpg

http://i325.photobucket.com/albums/k374/six7teen/06250913.jpg

http://i325.photobucket.com/albums/k374/six7teen/06250914.jpg

http://i325.photobucket.com/albums/k374/six7teen/06250918.jpg

http://i325.photobucket.com/albums/k374/six7teen/06250923.jpg

http://i325.photobucket.com/albums/k374/six7teen/06250920.jpg

http://i325.photobucket.com/albums/k374/six7teen/06250921.jpg

http://i325.photobucket.com/albums/k374/six7teen/0625096.jpg


http://i325.photobucket.com/albums/k374/six7teen/P1201436-2.jpg

http://i325.photobucket.com/albums/k374/six7teen/P1201437-2.jpg

http://i325.photobucket.com/albums/k374/six7teen/P1201441-1.jpg

http://i325.photobucket.com/albums/k374/six7teen/P1201439-1.jpg

http://i325.photobucket.com/albums/k374/six7teen/SDC10312-2.jpg

http://i325.photobucket.com/albums/k374/six7teen/SDC10957-1.jpg

http://i325.photobucket.com/albums/k374/six7teen/SDC10960-1.jpg

http://i325.photobucket.com/albums/k374/six7teen/SDC10315-1.jpg

http://i325.photobucket.com/albums/k374/six7teen/P1201421-2.jpg

http://i325.photobucket.com/albums/k374/six7teen/0625094.jpg

http://i325.photobucket.com/albums/k374/six7teen/0625091-1.jpg

http://i325.photobucket.com/albums/k374/six7teen/P1201423-2.jpg

http://i325.photobucket.com/albums/k374/six7teen/0625092-1.jpg

http://i325.photobucket.com/albums/k374/six7teen/06250915.jpg

http://i325.photobucket.com/albums/k374/six7teen/06250916.jpg

http://i325.photobucket.com/albums/k374/six7teen/06250924.jpg


Best way to contact me is either PM or texting me at 706-662-4098.. If you call, i probably wont answer, but you can leave a message.. Thanks in advance IA! reps to where reps are deserved!

six7teen
06-25-2009, 10:22 AM
also, if you want the wheels on the black civic in the background, i can include those INSTEAD of the slips!!

Big_Joe
06-25-2009, 10:44 AM
Looks damn good man. glws

Burnz1one
06-25-2009, 10:44 AM
damn i dont say this much, but i love the 4door. GLWS

ArK
06-25-2009, 10:45 AM
Fresh!

bump! lmao at the band aid

six7teen
06-25-2009, 10:46 AM
haha, had to do something to cover my stupid mistake up

BIGWADE
06-25-2009, 11:14 AM
clean car man..ill trade my wheels 4 urs..check out my thread!!LMK!!! GLWS!!!

civic gsr
06-25-2009, 01:59 PM
nices lowest four door ever glws

EL-CANGRI
06-25-2009, 03:41 PM
nice

slostang
06-25-2009, 06:20 PM
dont let her go man. i miss my eg8 with a passion.

Complete
06-25-2009, 10:15 PM
nice

jdmmmm
06-25-2009, 10:21 PM
damn thats sexy! wish i had something to offer for that!

f22 a1
06-26-2009, 12:35 AM
this is supah fresh yo!

SoLJames95
06-26-2009, 12:49 AM
Ill offer the del slow :ninja:.... j/k cant do that. This is a good guy. Who worked hard for this car/parts. This thing has come along way. Bump/repps/pm/Give me ur fn HIDS. You dont need 2 sets. ;)

Captain-Obvious™
06-26-2009, 09:31 AM
keep it!!!

ultm8mind
06-26-2009, 10:58 AM
Bump for a good guy, and since he reps Columbus (nothin to be too proud of, LOL) I had to bump this. GLWS man.

Turbodude06
06-26-2009, 11:22 AM
Lots of good parts on that thing, good luck:goodjob:..............

hondalover00
06-26-2009, 03:50 PM
what is the hole cut out on the body for?

MisterMonkey
06-26-2009, 06:17 PM
PM'd you an offer

six7teen
06-27-2009, 02:53 AM
what is the hole cut out on the body for?


if you are refferring to the engine bay, it is for the upper control arms.. with the camber kits and being as low as it is, the upper arms just bang into the strut tower, damage it, and create an ugly hole anyways... my solution to this problem was cutting out part of it, rolling it back inside the fender well, then riveting it in for support.. then primer was applied to it so there would be no surface rust... now, the car rides smoother (not bottoming out on the strut tower), and it doesnt look AS trashy as it did

hondalover00
06-27-2009, 05:56 AM
if you are refferring to the engine bay, it is for the upper control arms.. with the camber kits and being as low as it is, the upper arms just bang into the strut tower, damage it, and create an ugly hole anyways... my solution to this problem was cutting out part of it, rolling it back inside the fender well, then riveting it in for support.. then primer was applied to it so there would be no surface rust... now, the car rides smoother (not bottoming out on the strut tower), and it doesnt look AS trashy as it did

o ok...just never seen anything like that before....

six7teen
06-27-2009, 03:48 PM
its original

madwick
06-27-2009, 03:56 PM
looks good slammed, good luck fellow columbus bro!

nismo_92
06-27-2009, 06:36 PM
bump for looking glws

six7teen
06-29-2009, 12:36 AM
reps to everyone!! (if i missed ya just LMK!!)

BamzRexsi90
06-29-2009, 03:43 AM
clean! lol at snoopy

six7teen
06-29-2009, 06:11 AM
sank you!

SLo_MKIII
06-30-2009, 06:30 PM
i love it g/l

95turd
06-30-2009, 07:40 PM
god i love me a four door. wish i had somethin to offer. gl

93DA Integra
06-30-2009, 09:38 PM
Pm'd

SiR EG2
07-01-2009, 09:52 AM
nicely modded EG8