Ed's first honda... (many pics)

[Ed]

Well, it's been 8-9 years since I got my first car... and I have never had a honda...

That has changed...

http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG00107.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG00108.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG00109.jpg

It's just a beater. Picked it up today, blown motor. For now, I just want to drop a D16, and use it as a daily driver.

My plans:
- make it look presentable (maybe clay bar the paint see how it looks, put some meshes, and maybe some springs, a nice little drop and new seats).
- somewhere down the road maybe a b series motor. Havent decided yet, but prob b20 block with b16 head. Just to have get up and go, not that it would be greats amount of power, but at least more than a d16 would.
- no exhaust or intake. i want it to sound normal. i already got my loud car



06 -21-09 Quick update:

Took all the seats, center console out. Preliminary first clean up.

My driver door's hinge seems to be broken. It doesnt close all the way.

http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG00110.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG00111.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG00112.jpg

Seats

http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG00113.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG00114.jpg

One seat out
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG00115.jpg

Second seat out
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG00117.jpg

Center console out
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG00120.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG00122.jpg

Trunk
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG00124.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG00126.jpg

Back seats out
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG00125.jpg

After vacumming.
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG00127.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG00128.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG00129.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG00130.jpg

Next step shampooing.




Cleaned the garage and moved it in.
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3658.jpg

Took IA's advice and took the carpet out
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3655.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3660.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3662.jpg

The beast's broken heart.
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3663.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3664.jpg

06/27/09 Update

Yesterday 88NACivic and I started working on it, got help from MongolPup and Xpsi. Here are some pics

The new engine, D15B, Jey Dee Em.
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3665.jpg


Good bye old
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3666.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3668.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3671.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3672.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3687.jpg


Check out the grease on this baby...
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3688.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3690.jpg

I did the best i could cleaning the tranny but i just didnt care anymore at this point... Got a pressure washer today but the engine was already in...
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3691.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3692.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3693.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3694.jpg

Hello new...
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3695.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3697.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3702.jpg

Battery was dead, charged it, engine turns but doesnt turn on all the way. Tomorrow will clean the garage and troubleshoot see what the hell is wrong with it. Seats and carpet are still out. Pressure washing the carpet tomorrow.




MongolPup showed up with a gift I was waiting for... it's fucking sweet. Dont mind my dirty window. I got a DD now so i can keep the evo clean at all times now. It will be garaged.

http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3673.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3675.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3676.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3677.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3681.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3684.jpg

We gonna start the pedobear crew...

07/03/09 Update

Battery was dead. Advanced auto parts people told me to try to warranty it, it was a wal mart battery, turns out they did warranty it for me. Free battery, cant beat that.

I cleaned out the oil stains in the garage, since it's not my house, and sprayed some purple power on the transmission, to get some of that grease out, and the old engine. Engine looks a lot better now.

Today we put the AC compressor back on as well. I may have AC soon.

So put the new battery in and fixed the timing, put a new dizzy in and it worked.

Put all the interior back on and it's good to go except the clutch cable MAY need adjusting (which im hoping this is the problem) or the clutch is slipping. The last owner said the clutch never slipped or anything and when we did the swap the clutch looked fine. Also the brakes need to be bled. Probably do that sometime this weekend.

I didn't have my camera today so i only snapped these 4 pics:

http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG00143.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG00144.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG00145.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG00146.jpg
Update 08/14/09

Have been busy the past few weeks, and haven't really had a chance to do anything.

The car wasnt running right so i decided not to drive it. Last weekend, i drove it up to cumming, where one of my friends live and we spent all weekend trying to fix all major issues. New head and exhaust gasket were the big ones, everything else was minor. Car runs awesome now. Yesterday i went to mainstream and james did a couple of things for me here and there, just some loose wires.

Things I still need to do:
-replace my shift linkage, my shifter has at least 6" of play WHEN IN GEAR. (bushings are gone but its still driveable)
-replace or fix master brake cylinder, as it's leaking
-replace the temperature sensor right underneath the distributor

these are cosmetic that i want to do:
-get the 91 tail lights (the two strips)
-rims
-lower a little, not slam it
-steering wheel (which i already have, i just need the hub, if anyone has one LMK, or else im buying it off ebay)
-seats
-stereo and speakers
-glove compartment, im missing mine.
-Integra center console. Not having cupholders sucks!

Today i did some cleaning too. Made it look a little more presentable. Oh and a BIG one, I now have AC. :taun:

http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG00171.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG00172.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG00173.jpg

Sorry for shitty pics again.
More to come, hopefully soon.

Thanks for looking.

[ATLTSX]

Looks good Ed. I'm proud of you.

[Scotsman]

nice!

[Revmaynard]

Nice! Glad your first Honda is a EF! haha.

[WTF?]

nice pick up how much did you pay? and i miss mine

[Ed]

nice pick up how much did you pay? and i miss mine

$0.00

my buddy said he wasnt gonna do shit with it, so i was like, can i have it? hes like yeah come pick it up.

[Ed]

Ben, TDS, Revmaynard, thanks guys.

[Revmaynard]

Nice! Thats badass! Haha.

[Ed]

oh i need a stock muffler. this has a hole in it, it's loud as crap.

[SLo_MKIII]

$0.00

my buddy said he wasnt gonna do shit with it, so i was like, can i have it? hes like yeah come pick it up.

ballin ass deal

[Ed]

how hard is it to swap a motor in this thing?

anyone have an engine jack in smyrna/marietta i can borrow?

[Ed]

ballin ass deal

thanks bro. yours is very nice. i wouldnt mind it if i made mine look like that :D

[D3UC3S]

Crazy deal!!! I would love to have an EF as a project. Welcome to the family!

[Revmaynard]

It only took like 30 minutes to pull my motor. lol

[Ed]

It only took like 30 minutes to pull my motor. lol

come lend a hand.

:cheers:

i may start working on it tomorrow, at least look at it, familiarize with it, then friday, if i already have a jack and motor, do the swap.

i need to find some kind of manual.

[DB4LYFE ™]

welcome Home!

~DB4LYFE

[Ed]

Crazy deal!!! I would love to have an EF as a project. Welcome to the family!

thanks bro!

Reps to everyone i can.

[Z33_kid]

kool

[WTF?]

wow at that price good luck with it

[Ed]

wow at that price good luck with it

thanks brotha.

[ej6kidd]

nice pick up man welcome to the honda game

[MongolPup]

MUY BIEN EL ED, ME GUSTA ESTO HONDA

[Ed]

lol i dont speak that shit...

but thanks playa. you gonna come help me work on it?

[*EFilliated*]

NICE, new ef squad member:bump:

[SLo_MKIII]

thanks bro. yours is very nice. i wouldnt mind it if i made mine look like that :D

thanks i hope u enjoy the slowness

[Ed]

thanks i hope u enjoy the slowness

I will enjoy the MPG :D

[MongolPup]

lol i dont speak that shit...

but thanks playa. you gonna come help me work on it?

Sure, but I don't know if you can fix torque steer!

[Ed]

Sure, but I don't know if you can fix torque steer!

haha

[SLo_MKIII]

I will enjoy the MPG :D

hell yeah im gettin between 42-46 mpg

[Ed]

hell yeah im gettin between 42-46 mpg

what motor do you have?

and yes, that sounds unbelievable right about now

[MongolPup]

lol i dont speak that shit...



YEAH ME NEITHER, IN AMERICA WE SPEAK ENGLISH.

AMERICA = FUCK YEAH!

[BIGWADE]

nice man.. thats a hell of a deal..wanna sell it lol..make a build thread 2 keep us posted on how it comes alone..gl with it should be a fun project..

[Ed]

nice man.. thats a hell of a deal..wanna sell it lol..make a build thread 2 keep us posted on how it comes alone..gl with it should be a fun project..

sounds like a good idea. i will probably just use this thread as the build. but it will be a good while til i can buy those parts for it.

[speedminded]

Moving up in the world huh?! Inspiration...

http://www.jtuned.com/wire/wp-content/uploads/2008/03/014.jpg

[PreludeVTEC01]

FREE!!! Damn what a deal! GL!!

[BB1_Luda]

It only took like 30 minutes to pull my motor. lol
x2.
Easy. Its like Lego's

http://i130.photobucket.com/albums/p272/BB4_Lude/The%20EF/Feb18_0004.jpg

[BIGWADE]

sounds good man..i want one of these as a dd also.. it don't take alot 2 make one of these look nice and ride out!


sounds like a good idea. i will probably just use this thread as the build. but it will be a good while til i can buy those parts for it.

[quickdodge®]

Nice! Glad your first Honda is a EF! haha.

Yeah. Since he couldn't get an SB, he might as well make it an EF, lolol. Later, QD.

[Ed]

Yeah. Since he couldn't get an SB, he might as well make it an EF, lolol. Later, QD.
Qd why the hate playa?

[Crazy Asian]

oo nice dd.

[quickdodge®]

Qd why the hate playa?

SBs are always better than EFs. But no hate. I love the EF sedan. Later, QD.

[larossa9]

hahaha sweet! thats going to be a major change from the evo lol, and gooo ed!!!

[Ed]

QD I got it cause it was free. :)

Larossa I still got the evo. :ninja:

[Sammich]

pretty awesome faggot...do just a b20 motor w/ a b16 trans...itll be loads of fun...like the l....never mind, just do it lol

[slostang]

oh i need a stock muffler. this has a hole in it, it's loud as crap.

i thought it didnt run? :rolleyes:

[silversol]

i could put that new motor in.................

[Ed]

Slovic it doesn't but I remembeit from when my friend drove it.

Silversol I wanna try and do it myself so I can learn and also cause I'm tight on budget. If you wanna quote me an engine that would be cool. The motor in it now is a d15b2

[Ed]

06 -21-09 Quick update:

Took all the seats, center console out. Preliminary first clean up.

My driver door's hinge seems to be broken. It doesnt close all the way.

http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG00110.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG00111.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG00112.jpg

Seats

http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG00113.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG00114.jpg

One seat out
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG00115.jpg

Second seat out
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG00117.jpg

Center console out
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG00120.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG00122.jpg

Trunk
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG00124.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG00126.jpg

Back seats out
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG00125.jpg

After vacumming.
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG00127.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG00128.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG00129.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG00130.jpg

Next step shampooing.

[Ed]

Do these not come with a trunk release lever? Mine isn't there. How hard would it be to wire through and make one?

[Z Max]

love it, good luck, can't wait to see it finished

[mushroom_toy]

I would take the carpet out to shampoo and steam clean it. not that hard, and you wont get any water and soap in the car. technically if the carpet isnt too ratty you can pressure wash it.

[collins]

Hey Ed if u come across another free one, lmk!!! :D

[Ed]

How hard is it to put the carpet back in?

[Sammich]

DUDE...U ALREADY AHVE A BULK OF THE WORK DONE W/ REMOVING THE CARPET...TAKING IT OUT/REPLACING IT IS A CINCH NOW

[NickD70s]

sweet man looks like it will be a fun build

[dabuilding]

best move u could make lol looks good man i need to do another good interior clean up before mine gets back on the road

[Echonova]

Congrats!! Worth every penny you paid for it!

LOL j/k

[Ed]

Congrats!! Worth every penny you paid for it!

LOL j/k

agreed

[Ed]

Cleaned the garage and moved it in.
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3658.jpg

Took IA's advice and took the carpet out
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3655.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3660.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3662.jpg

The beast's broken heart.
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3663.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3664.jpg

[speedminded]

Scrub that engine bay!

Boil water.
Pour in a bucket.
Add simple green.
Scrub with a brush.
Rinse.
Repeat.

Do all the door jambs the same way :D

[Ed]

Scrub that engine bay!

Boil water.
Pour in a bucket.
Add simple green.
Scrub with a brush.
Rinse.
Repeat.

Do all the door jambs the same way :D

get me a hoist...

[93DA Integra]

Looks pretty good, man.



I wonder how many cowboys I could fit in that foe doe.

[HypnoToad]

trader

[Dirty Octopus™]

welcome brethren! :bow:

[speedminded]

Looks pretty good, man.



I wonder how many cowboys I could fit in that foe doe.Are you a guy? What's wrong with you? lol

[Ed]

Looks pretty good, man.



I wonder how many cowboys I could fit in that foe doe.

wtf @ sig



trader

still got the evo. this is just a dd


welcome brethren! :bow:

:cheers:

[HypnoToad]

still got the evo. this is just a dd





still:no:

[Sammich]

GOOD JOB EDUARDO

[Jecht]

When I'm back in ATL next week I'll help out since I've hit a snag working on restoring the Beetle.

[Ed]

When I'm back in ATL next week I'll help out since I've hit a snag working on restoring the Beetle.

yeah i got someone coming to help me friday or saturday. what time are you gonna be back?

[Brian*]

NICE, I almost bought one JUST like that up here for $800... But I was not quick enough. Good DD!

[Ed]

NICE, I almost bought one JUST like that up here for $800... But I was not quick enough. Good DD!

thanks man!

[Ed]

Do these not come with a trunk release lever? Mine isn't there. How hard would it be to wire through and make one?

no one's answered this. anyone know?

[aaronfelipe]

WELCOME TO THE HONDA WORLD ED

[dabuilding]

no one's answered this. anyone know?
r u talking about the one under the dash? they all have one lol im not sure if itll be hard to put it in

[Ed]

WELCOME TO THE HONDA WORLD ED

Thanks man. :D


r u talking about the one under the dash? they all have one lol im not sure if itll be hard to put it in

thats for the hood.

the one im talking about is here. i have the one to open up the gas tank, but nothing for the trunk.

[Jecht]

Ed it will entirely depend on whether there are cops on 75 again like there were on my way down here. Probably sometime around 5-8pm.

[dabuilding]

Thanks man. :D



thats for the hood.

the one im talking about is here. i have the one to open up the gas tank, but nothing for the trunk.
damn my bad brain fart lol the cable isnt there tho?

[Ed]

nope. is that normal?

its a dx model, is that the base model?

[sakasaku]

nope. is that normal?

its a dx model, is that the base model?



no STD is the base model


oh and inspiration for interior heres mine
http://i268.photobucket.com/albums/jj20/sakasaku/4563_1172166185033_1254360051_30486.jpg

[Ed]

that shit looks clean.

[sakasaku]

that shit looks clean.



thanxs integra center consol in case your wondering

[Revmaynard]

no STD is the base model


oh and inspiration for interior heres mine




Threadjack.

[94accordkid]

thats awesome u got it for free

[Ed]

thanxs integra center consol in case your wondering

oh i just noticed that...

very nice.

[jadakid88]

nice

[Sammich]

thanxs integra center consol in case your wonderingare those stock buckets?:eek:

[Jecht]

I have a ton of buffing compound if you want me to bring that over when I get back. The paint looks like we could bring it back to looking decent.

[civicmantim]

Looks like a clean car.Welcome to the world of honda's

[C-loS109]

damn man what a great deall!!! lol

[Killer]

pics remind me of when you helped me throw my interior back in... remember the monsoon that flooded my old coupe??? lol


gl ed lmk if you need any help..

[Ed]

pics remind me of when you helped me throw my interior back in... remember the monsoon that flooded my old coupe??? lol


gl ed lmk if you need any help..

ill be doing the swap friday, if you wanna come down, that'd be great.

[Jecht]

ill be doing the swap friday, if you wanna come down, that'd be great.

You already got another engine? lol

[Ed]

You already got another engine? lol

may be getting it today.

[Revmaynard]

are those stock buckets?:eek:


No, those seem to be DA/DC seats.

[sakasaku]

No, those seem to be DA/DC seats.

98 integra seats igot em for 140$

[Revmaynard]

I got my set of 94's for $40. ;p

[awestun]

I bet it smells really old.

[Ed]

I bet it smells really old.

actually if it smelled as bad as that carpet looks, it would be pretty bad, but it doesnt smell bad at all. i was surprised.

[dabuilding]

nope. is that normal?

its a dx model, is that the base model?
no u should deffinantly have one if u need parts come up here to cartersville theres a junkyard (cagles) that has a ton of 4 doors thats where i murk out all my parts at

[Ed]

no u should deffinantly have one if u need parts come up here to cartersville theres a junkyard (cagles) that has a ton of 4 doors thats where i murk out all my parts at

very nice. i will have to go up there sometime. i need a few parts for it.

[dabuilding]

very nice. i will have to go up there sometime. i need a few parts for it.
yea man its a great spot for em and theres acouple DBs there too

[Ed]

what part of town do you stay?

[blacknightteg]

good luck with it ed.

[Ed]

^thanks yo

[Ed]

06/27/09 Update

Yesterday 88NACivic and I started working on it, got help from MongolPup and Xpsi. Here are some pics

The new engine, D15B, Jey Dee Em.
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3665.jpg


Good bye old
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3666.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3668.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3671.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3672.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3687.jpg


Check out the grease on this baby...
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3688.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3690.jpg

I did the best i could cleaning the tranny but i just didnt care anymore at this point... Got a pressure washer today but the engine was already in...
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3691.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3692.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3693.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3694.jpg

Hello new...
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3695.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3697.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3702.jpg

Battery was dead, charged it, engine turns but doesnt turn on all the way. Tomorrow will clean the garage and troubleshoot see what the hell is wrong with it. Seats and carpet are still out. Pressure washing the carpet tomorrow.




MongolPup showed up with a gift I was waiting for... it's fucking sweet. Dont mind my dirty window. I got a DD now so i can keep the evo clean at all times now. It will be garaged.

http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3673.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3675.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3676.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3677.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3681.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG_3684.jpg

We gonna start the pedobear crew...

[Ed]

Few things I forgot.

I need a front motor mount, right side mirror, battery tie down, and a bolt for the driver side mount.

[Echonova]

How in the hell is Mongol gonna come to town and not come see me? I see how that ***** is now. And no Pedo sticker for me?? Fuck that fucking fucky fuck fuck.

[Jecht]

I probably won't be able to bring the pressure washer tomorrow, my dad doesn't want it moved from our house. I'll see about getting the one you have over there to work though. No work tomorrow for me so I'll hang out over there and try to help trouble shoot it. We can buff and wax it too. :lmao:

[jerseyef9]

looking good bro

[Ed]

Echo, don't be jealous. And he came into town, meaning metro atlanta, not bumfuck athens.

Jectht that sucks hopefully we'll get it running.

Thanks jerseyef

[Ed]

I need a distributor. Anyone have one?

[BexSican 408]

good job so far man.

Can I join the Pedo bear group?? ha

http://i95.photobucket.com/albums/l140/davidbexley/IMG_4386.jpg
http://i95.photobucket.com/albums/l140/davidbexley/IMG_4385.jpg
http://i95.photobucket.com/albums/l140/davidbexley/IMG_4382.jpg

[all_american_gurl09]

nice pics and good luck!

[StraightSix]

You can try a couple of things with the distributor.

One of the common problems with them is that the ignitor fails. You can pull it and have it tested at Advance. It lives in the distributor and has four wires going into it. They are subjected to a lot of heat soak and tend to be the first component in the dizzy to fail. The coil can be checked with an ohm meter, too, to narrow down what's wrong with the dizzy.

Another failure is that the little screw that hold the ignition rotor to the distributor shaft backs out. I've had this happen on mine three-ish times; once was in the middle of traffic in Atlanta. A new rotor would fix it since the rotor comes with a new set screw.

I'd also recommend getting another extra distributor and carrying it in your trunk. I'm on my fourth dizzy in about six years of owning my hatch.

[Ed]

Straightsix I appreciate the help I'm watching the game right now but after the game I'm gonna get back on it.

Also I have a jdm distributor that came with the engine, so I will take both apart and try to fix it. The jdm dizzy is all weird looking and won't work with it.

[civic gsr]

SHIT WOULD LOOK SICK LOWERED AND SOME ROTAS GL MAN

[Ed]

bexsican looks like you're the third member of the pedobear crew. lol

straightsix, i opened it up both dizzys i have and they dont look anything like the other. so i am not sure. i may take the icm to see they can test it. also the bearing holding the shaft is bad, the shaft isnt turning as smoothly as it should be.

[Ed]

everyone else thanks for your comments. still a lot of work and sweat for this car. today jecht came over with rubbing compound and just did a quick clean up with it and it already looks 100 times better. i took a couple of pics. will post later when i upload them to photobucket.

i need a pressure washer. i got one and can not get it to start. checked everything. if anyone in smyrna/marietta has one i can borrow for maybe one hour that would be great

[StraightSix]

bexsican looks like you're the third member of the pedobear crew. lol

straightsix, i opened it up both dizzys i have and they dont look anything like the other. so i am not sure. i may take the icm to see they can test it. also the bearing holding the shaft is bad, the shaft isnt turning as smoothly as it should be.

D-series distributors can be quite notchy when turning the shaft. It's not an indication of the bearings health as there's a magnet and an excitor ring. The notchiness is coming from that rather than bearing. End play and radial play are better indicators of the bearing's health.

I'm not surprised that the JDM and USDM distributors look different inside. Also, I wouldn't expect the JDM dizzy to work with the wiring in your dual point car. Hell, the USDM DPFI and MPFI distributors aren't interchangable. But, the ignition modules might be; my car is currently running a MPFI distributor with the module out of an OBD1 D15B7.

Keep at it. It'll be running soon enough.

[Xpsi]

Let me know how its goes Ed. I could swing by tomorrow after work if you need help on anything. I might need a small favor from you though. :)

[dabuilding]

man ed the motor looks excellent u gotta let me get in on that pedobear club :goodjob: i want a sticker

[Ed]

D-series distributors can be quite notchy when turning the shaft. It's not an indication of the bearings health as there's a magnet and an excitor ring. The notchiness is coming from that rather than bearing. End play and radial play are better indicators of the bearing's health.

I'm not surprised that the JDM and USDM distributors look different inside. Also, I wouldn't expect the JDM dizzy to work with the wiring in your dual point car. Hell, the USDM DPFI and MPFI distributors aren't interchangable. But, the ignition modules might be; my car is currently running a MPFI distributor with the module out of an OBD1 D15B7.

Keep at it. It'll be running soon enough.
yeah i knew the JDM dizzy wouldnt work. im just gonna look for another dizzy


Let me know how its goes Ed. I could swing by tomorrow after work if you need help on anything. I might need a small favor from you though. :)

I have class tomorrow. I may not be able to work on it.

What do you need?


man ed the motor looks excellent u gotta let me get in on that pedobear club :goodjob: i want a sticker

that engine does look good.

[Sammich]

LIRFL @ TEH PEDO STICKER...PURPLE POWER AND WATER HOSE WILL TAKE CARE OF ALL YOUR ENGINE BAY GREASE PROBLEMS, BELIEVE ME, MY TRUCK KNOWS. AS SOON AS I DO MY OIL PAN GASKET ITS GONA BE GREASE FREE

[Ed]

LIRFL @ TEH PEDO STICKER...PURPLE POWER AND WATER HOSE WILL TAKE CARE OF ALL YOUR ENGINE BAY GREASE PROBLEMS, BELIEVE ME, MY TRUCK KNOWS. AS SOON AS I DO MY OIL PAN GASKET ITS GONA BE GREASE FREE

thats a good idea. i hadnt thought of that.

[88NaCivic]

Yo ED, I want in on Da PedoCrew! LMK when you get that Dizzy for that BEAst..
I will look around but I don't think I have 1..

[SLo_MKIII]

what motor do you have?

and yes, that sounds unbelievable right about now

the motor u pulled out lol

[Ed]

Yo ED, I want in on Da PedoCrew! LMK when you get that Dizzy for that BEAst..
I will look around but I don't think I have 1..

Talk to Jim, he's got the stickers :lmfao:

[88NaCivic]

ED we need to do this to the EF!


FREE CANDY

[SiR EG2]

this is epic. congrats ;)

[rbwdriven]

JDM dizzy will not work.

also check main relay under the dash.

There are plenty of ef sedans at pull a part in norcross that has the cable assembly that you need for the trunk unlock.

I have some sedan parts around the house that are blue if you need any.

[Ed]

rbwdriven, yeah i can come by and take alook...

here's an update...

got the dizzy to work, it sparks now but i think the battery is dead. i charged the battery but as soon as i crank it up, it just seems to drain all of it.

tomorrow, or friday im gonna take the battery out and take it to autozone to test it.

[ATLTSX]

rbwdriven, yeah i can come by and take alook...

here's an update...

got the dizzy to work, it sparks now but i think the battery is dead. i charged the battery but as soon as i crank it up, it just seems to drain all of it.

tomorrow, or friday im gonna take the battery out and take it to autozone to test it.

I got an idea..You should buy my slim battery..wow

[Arm&hammer]

nice work man.
good luck getting it started!

[Jecht]

rbwdriven, yeah i can come by and take alook...

here's an update...

got the dizzy to work, it sparks now but i think the battery is dead. i charged the battery but as soon as i crank it up, it just seems to drain all of it.

tomorrow, or friday im gonna take the battery out and take it to autozone to test it.

Wait, you got it to crank and start? If it starts and then dies off quickly I'd say its the alternator or an incredibly bad battery.

[southside]

I say you boost the single cam:goodjob:

[Ed]

I got an idea..You should buy my slim battery..wow

how much?


nice work man.
good luck getting it started!

thanks


Wait, you got it to crank and start? If it starts and then dies off quickly I'd say its the alternator or an incredibly bad battery.

it doesn't start, as soon as i turn the key it just drains what little battery it has. i let it charge for like 5 minutes but still wouldnt start. i think its a bad cel.


I say you boost the single cam:goodjob:

i already have boost. :D this will be my point a to b car.

[boostwizard]

nice bro!!

[Dville nismo]

hell of a job man, it looks good!

[civic95]

If you still need an exhaust I have a perfect stock 92-95 civic coupe exhaust you can have.. Not sure if it will bolt up, may have to have it welded. I'm in smyrna.

[ATLTSX]

Give me a call. We can work something out.

[dabuilding]

if the battery is being a pain pop off the caps and make sure the acid/water is about 1/2 inch from the top if its not put water in there then charge it

[dexsohcvtec]

lookin good man.. lots of luck with the project

[Jecht]

Dude, if it won't charge, just try jump starting it from the truck. All you would need the battery for is to complete the circuit. If it starts like that then the battery is definitely dead.

[Ed]

thanks everybody.

civic95, i may take you up on that offer. I got a PM from another member saying he was almost sure he had one in his garage, I will make sure with him and if he doesn't I'll come get it off your hands.

jecht, tomorrow i may go troubleshoot it around 4. i will call you so you can come.

[Ed]

07/03/09 Update

Battery was dead. Advanced auto parts people told me to try to warranty it, it was a wal mart battery, turns out they did warranty it for me. Free battery, cant beat that.

I cleaned out the oil stains in the garage, since it's not my house, and sprayed some purple power on the transmission, to get some of that grease out, and the old engine. Engine looks a lot better now.

Today we put the AC compressor back on as well. I may have AC soon.

So put the new battery in and fixed the timing, put a new dizzy in and it worked.

Put all the interior back on and it's good to go except the clutch cable MAY need adjusting (which im hoping this is the problem) or the clutch is slipping. The last owner said the clutch never slipped or anything and when we did the swap the clutch looked fine. Also the brakes need to be bled. Probably do that sometime this weekend.

I didn't have my camera today so i only snapped these 4 pics:

http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG00143.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG00144.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG00145.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG00146.jpg

[Ed]

pressure washed the carpet. it was fucking disgusting.

[Revmaynard]

Good progress! Keep it up, man.

[Ed]

thanks josh. it was nice to drive it. I put all that work into it and after the motor was in it wouldn't start.

def a let down for me, but i have never gotten so excited over a honda like i did today when the engine was first turned on.

[Revmaynard]

Yea, I know what you mean. lol I was never a Honda person until I bought my wagon. :D

[Jecht]

Oh man the look on your face every time you started that thing. :lmao:

[D3UC3S]

Good job on getting it running and cleaning it up! The DD looks great.

[88NaCivic]

Ed good to hear she started up for you !!

[Ed]

thanks everyone.

[HalfBaked]

Who wears sandles to work on cars?

Fucktards.

[Ed]

your mom loves it.

[Jecht]

Who wears sandles to work on cars?

Fucktards.

Pretty much all of us who worked on the car. :lmao:

[Crazy Asian]

that dirty lil honda...just like you.

[D3UC3S]

Pretty much all of us who worked on the car. :lmao:


LOL!!! reps

[Ed]

So i need bushings for the shifter, and the clutch will need to be replaced sometime. Vteckidd said i can probably drive it for a while before it goes out.

[all_american_gurl09]

really looking good man......... r u gonna paint it another color or leave it white

[Ed]

just a quick update.

today, i drove it around for the first time.

clutch is fine now, maybe it needed to be settled? maybe it was grease from when we worked on it? either way its not slipping.

the idle stays high cause of the cable of the throttle. if i pull the accelerator back with my foot it goes back to normal. i tried spraying some wd40 to see if that would fix it, but that didnt fix it. im gonna ghetto rig it, attach another spring on the other side and try to fix it like that.

my shifter needs bushings. the play on it is tremendous. if anyone's got one hit me up.

my flywheel is exposed. one of my friends may have a cover for it, and i will get it if he does.

i need to replace my o2 sensor.

one of the hoses on the thermostat is leaking, so when i drive it for a long time and i get to my destination a big cloud of coolant smoke comes out.

my speedometer stopped working. im sure this is nothing big.

reverse light and oil temperature sensor needs to be hooked up.

other than that, i cant think of anything else wrong with it.

im just glad the clutch is fine. i know we looked at it and it was fine. the rest is jsut minor stuff. :D

[RUFFIAN]

Nice project. great price!

[Repiks]

Sweet man, glad to hear you got it up and running.

Should turn out to be a good DD. Keep that evo clean and sexy

[JEY$JDM]

Hell yeah man... Good progress! I need to dump some more cash in my hatch...

[Ed]

thanks everyone.

[all_american_gurl09]

good job man cant wait to see it out at the varsity and car meets

[Ed]

^ it wont come to the varsity or car meets. I drive the evo to those, IF i ever go.

[scrxils]

looks to be a great find and it looks like your getting it done good luck with it

[ShooterMcGavin]

omg what a piece, and you wanted to keep that at my house for a couple wks??? lulz, j/k :D

[BamzRexsi90]

lol @ yall workin with flip-flops on ....first thing i thought was my shop teacher back when "get out of here with those shorts" he prolly would have had another heartattack if you walked with flip-flops on. yeah good luck with your new toy

[Turbd4DE]

Good luck w/ it bro an sorry about the muffler.

[Jecht]

lol @ yall workin with flip-flops on ....first thing i thought was my shop teacher back when "get out of here with those shorts" he prolly would have had another heartattack if you walked with flip-flops on. yeah good luck with your new toy

Haha

Its because we were working outside in the heat.

[Jason..]

looks like shit fag boy!!!!

[Ed]

i already put your mom in the backseat and banged her in it. she loved it.

[Ed]

Update 08/14/09

Have been busy the past few weeks, and haven't really had a chance to do anything.

The car wasnt running right so i decided not to drive it. Last weekend, i drove it up to cumming, where one of my friends live and we spent all weekend trying to fix all major issues. New head and exhaust gasket were the big ones, everything else was minor. Car runs awesome now. Yesterday i went to mainstream and james did a couple of things for me here and there, just some loose wires.

Things I still need to do:
-replace my shift linkage, my shifter has at least 6" of play WHEN IN GEAR. (bushings are gone but its still driveable)
-replace or fix master brake cylinder, as it's leaking
-replace the temperature sensor right underneath the distributor

these are cosmetic that i want to do:
-get the 91 tail lights (the two strips)
-rims
-lower a little, not slam it
-steering wheel (which i already have, i just need the hub, if anyone has one LMK, or else im buying it off ebay)
-seats
-stereo and speakers
-glove compartment, im missing mine.
-Integra center console. Not having cupholders sucks!

Today i did some cleaning too. Made it look a little more presentable. Oh and a BIG one, I now have AC. :taun:

http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG00171.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG00172.jpg
http://i139.photobucket.com/albums/q313/yslbtt/Honda/IMG00173.jpg

Sorry for shitty pics again.
More to come, hopefully soon.

Thanks for looking.

[Ed]

You can't really see it in the pics, but i put armor all on the bumpers and the liners on the doors. It looks a lot better now. Im gonna do some more cleaning tomorrow.

[Ed]

Another thing I need is a right side mirror. I may have one, but the dude is not sure yet.

[ShooterMcGavin]

black magic will have those bumpers looking black again :P

[Revmaynard]

While you're looking for an integra console you can use this method...

http://img.photobucket.com/albums/v225/true_men_dont_kill_coyotes/EE%20Wagon/S6302118.jpg


Only costs about $4. lolol I can't use mine now because of my short shifter though.


Btw, I used Duplicolor Bumper Coating on my bumpers and they came out great.

http://img.photobucket.com/albums/v127/digitaljunkie/FB109bumperCoating_duplicolor.jpg

http://img.photobucket.com/albums/v225/true_men_dont_kill_coyotes/EE%20Wagon/100_1483.jpg

[marcos713]

Looking good man! Nice dd. Got zex dry kit if ur interested :ninja: make a nice sleeper.
GLW it tho man

[Ed]

Wayne and josh thanks yo. I will try that I was thinking about spray painting the bumper but the duplicolor seems like a good idea.

Marcos, thanks I'm not trying to make this go fast.

[Revmaynard]

I used flat black spray paint plenty of times before I used that, but with the Duplicolor there is no touching up. The flat black faded over time. However it did make for a good primer so the Duplicolor stuck better.

[Ed]

I used flat black spray paint plenty of times before I used that, but with the Duplicolor there is no touching up. The flat black faded over time. However it did make for a good primer so the Duplicolor stuck better.

cool. i should try it then.

[csmiths]

looking good man

[ALVIN]

so you financed it?

[Ed]

financed what alvin?

[Sammich]

wharrgarbl

[Ed]

i thought hondas were supposed to be reliable. it died on me this morning. i had it towed to a shop.

engine is turning, i think its a fuel issue.

[Sammich]

hondas are reliable...until u put a bottle on it ed...

but iheard someone put sugar in yo tank :ninja: