single cam cable trans

[slostang]

im literally having to force it into gear nearly every time i shift. i changed the fliud with syncromesh today and it didnt help any... help?

[88NaCivic]

Sounds like either pressure plate or throw out bearing- does it make any noise?

[slostang]

none at all. and from what i understand its a fairly new competition stage 2 setup.

[88NaCivic]

LOL yep the same setup I had stage 2 clutch a pressure plate.
I couldn't even install the PP, well I did but it never worked correctly. clutch was fine PP gave me the problem.
mine was so bad you couln't even get it into gear.

I would say the pressure plate.
Did you have any other problems with the tranny before?

[slostang]

nope. i was at the track and then it just decided it didnt want to go into gear... every once in a while it goes into gear fine. most of my problems are in 1st and 2nd. 3,4,5 are tolerable.

[88NaCivic]

hmm interesting... Which tranny are you running and how long has that CC been on it? Mileage on the tranny?

[Barefoot]

either u need to adjust your cable more. or u need a new clutch kit.

[slostang]

fuck.

[Motivation]

Slovic, check your phone.

[slostang]

replied...

[FasTech]

Damn, man. Hope you get it worked out and it isn't too much. My damn brakes just decided to almost die on me. So, I got to get that shit fixed.

[Z0_o6]

Definitely sound like a clutch issue. I would check the cable first though, with an upgraded pressure plate it is possible to stretch the cable, causing a lack of complete disengagement.

[slostang]

yep it was the cable. it was out of adjustment and very weak. it held for about 300ft. down the road after it was properly adjusted lol. i got a oem one on the way though!

Thanks guys and +11