PDA

View Full Version : disc conversion on a CRX


Tensa_Zanget
06-15-2009, 12:51 AM
Anyone know if a 99 civic rear disc conversion will bolt on and have no problem with a 91 crx?
EmminoDaGreat
06-15-2009, 01:22 AM
It probably will not bolt right up.
Tensa_Zanget
06-15-2009, 01:48 AM
It probably will not bolt right up.

What else should i do to get it bolt then
EmminoDaGreat
06-15-2009, 01:55 AM
sell it and buy rear disc's off a DA.
j0natell0
06-15-2009, 05:03 AM
ill buy them from u
bigdare23
06-15-2009, 06:44 AM
It will work. Just use your crx control arms, and you're good. Also, you may need to get 91 CRX Si parking brake cables because the ones that come with those trailing arms may be too long or short.
southside
06-15-2009, 07:22 AM
Indeed Dare is right^^^Im too lazy to take my rear disc off the old hatch.Didnt really notice a difference in stopping considering my master cylinder was going out so pedal went all the way down after using the brakes too long.Like sitting on a hill.
Tensa_Zanget
06-15-2009, 10:00 AM
darn guess no point in buying it cus its the chance of me finding a si parking brake cables...
bigdare23
06-15-2009, 11:00 AM
You can actually buy those parking cables from autozone.
Tensa_Zanget
06-15-2009, 12:06 PM
yea and they are like 50 bucks or more. Then that will equal out like 125 for the whole rear disc conversion...
jmmx258
06-17-2009, 03:23 PM
yea and they are like 50 bucks or more. Then that will equal out like 125 for the whole rear disc conversion...
So what are you complaining about?? That's not very much all things considered.
91-HATCH-
06-17-2009, 05:08 PM
i have seen ppl pay over 200 for those conversions. i did a rear disc on my 91 hatch. the disc came of a DA but those cables worked just fine.