PDA

View Full Version : Lets play name that connector!!


.EKMark
06-13-2009, 03:12 PM
Can someone tell me what these connectors are?

Please excuse the quality, I only had my phone.

This one is behind the motor and trans, I think its a O2 sensor connector but not sure
http://i604.photobucket.com/albums/tt126/EKMark/IMG00010-1.jpg

This one is under the intake manifold area right behind the head
http://i604.photobucket.com/albums/tt126/EKMark/IMG00009-1.jpg

This one is come off of the wiring harness on the passenger side
http://i604.photobucket.com/albums/tt126/EKMark/IMG00008-1.jpg

If I remember correct, this one is right next to the driver side axle
http://i604.photobucket.com/albums/tt126/EKMark/IMG00007-1.jpg
EmminoDaGreat
06-13-2009, 05:34 PM
none of those are 02, and seeing as there are many connectors alike, without seeing the wire colors it is hard to tell... but seeing as its an obd2 harness, the second plug is either evap solenoid or IAT.
EmminoDaGreat
06-13-2009, 05:35 PM
The first one may be, Power steering pressure, IACV, knock(depending on how many wires) etcetc...
jmmx258
06-13-2009, 08:55 PM
Looks like the last one might be a speed sensor plug, I'm probably wrong though.
.EKMark
06-14-2009, 02:55 AM
none of those are 02, and seeing as there are many connectors alike, without seeing the wire colors it is hard to tell... but seeing as its an obd2 harness, the second plug is either evap solenoid or IAT.
With the second and third picture showing the same connector I'm kind of confused with those
scttydb411
06-14-2009, 09:49 AM
pic one=2 wire round grey plug. gotta love honda for using same plug all over the engine bay. run continuity test to be sure what wire it is. don't just go plugging it in. if it's the wrong one you could burn the ecu and or iat sensor. in that area it could be:
iat (unless it's ek)
iacv
pwr steering
pic 2, black squareish plug 2 wire could be what james said. if it's an ek.
pic 3, gray plug w/ dead end connector is a distribution block. more than likely your distribution for iacv, injectors, etc.
.EKMark
06-15-2009, 09:49 AM
pic 3, gray plug w/ dead end connector is a distribution block. more than likely your distribution for iacv, injectors, etc.
What exactly is iacv?
slostang
06-15-2009, 01:03 PM
What exactly is iacv?

idle air control valve.

http://i687.photobucket.com/albums/vv236/rkowalko/honda_iacv.jpg