PDA

View Full Version : Team BRB and Friends of: What did you do to your Ride today.



OldsTech
05-24-2009, 09:05 PM
Figured this would be a fun thread. For everyone to share with each other whats goin on with your ride. Whether you wash your ride or Just installed a B20 with a GSR tranny. Lets share.

OldsTech
05-24-2009, 09:12 PM
I will start. I got my Cutlass home. From being parked at work with a flat for the last 2 months. It was funny the stupid thing wouldn't crank. And it was running when it got a flat. Anywayz it was a broken wire on the injection pump. I fixed that. And got the beast home (Only if she was a beast LOL). And I started cleaning her out today. I found a bunch of good stuff. But the rain stopped me from finishing hopefully I can continue tomorrrow and finish cleaning it. I also talked to my paint guy about painting it. He said he will do it for $625. So I will probably go that route once I get my bike parts from him. Just not sure on the color yet.

OldsTech
05-25-2009, 02:01 PM
Well, I finished cleaning out the cutlass and the truck. I think I am done for the day tho. I need to take the cutlass to the $3 car wash so I can vacuum it out. And get a good start. I want to start on getting the interior looking clean and stock.

Also I have the Monster 5in Tach from the Camaro which fit perfect in the camaro. But in the Cutlass Im goin to have to get creative. I need a 3 in for it really.

Just_CHill
05-25-2009, 07:28 PM
Dreamed about it :(

Motivation
05-25-2009, 07:30 PM
Dreamed about it :(

I tore my motor apart even more... :(


When you coming home bro?

ACCORDPRIDE
05-25-2009, 07:53 PM
lowered a camaro

Motivation
05-25-2009, 07:55 PM
lowered a camaro

only halfway. :taun:

OldsTech
05-25-2009, 10:06 PM
only halfway. :taun:

Only half Huh? Damn Brad I wish I could have done it like I said I would but I been super busy.

HypnoToad
05-25-2009, 10:24 PM
Only half Huh? Damn Brad I wish I could have done it like I said I would but I been super busy.

nah we got it all and the shocks in......looks good and drives good.

its cool man,plus the weather as not been in the rearend swapping mood

OldsTech
05-25-2009, 10:29 PM
nah we got it all and the shocks in......looks good and drives good.

its cool man,plus the weather as not been in the rearend swapping mood

Cya 2marrow nite then right. I have to see it!!!. Hey im shooting for next weekend. For the swap. Im going to take the rear-end to work and pressure-wash it and try to clean it. If you want we can spray it black too. Just a thought. If u buy the paint I will shoot it.

HypnoToad
05-25-2009, 11:00 PM
Cya 2marrow nite then right. I have to see it!!!. Hey im shooting for next weekend. For the swap. Im going to take the rear-end to work and pressure-wash it and try to clean it. If you want we can spray it black too. Just a thought. If u buy the paint I will shoot it.

yea i should be there 2morrow....

o,ok that sounds good man,nah think im gonna leave it unpainted.....but the pressure wash sounds good,thanks for that.

but ill talk to u 2morrow more bout it.:cheers:

ACCORDPRIDE
05-25-2009, 11:04 PM
yea got that pos lowered


u better paint it emo!!!

HypnoToad
05-25-2009, 11:30 PM
u think? maybe i should grab some from work

RickyBobbyV8
05-25-2009, 11:30 PM
Sanded some of my interior panels today getting prepped for paint, i would post pics but no one cares, its just a camaro :goodjob:

ACCORDPRIDE
05-25-2009, 11:35 PM
Sanded some of my interior panels today getting prepped for paint, i would post pics but no one cares, its just a camaro :goodjob:


post em up fag:2up:

DSGMach1
05-26-2009, 11:23 AM
Spent mo money today on buying the last of exhaust pieces.

HypnoToad
05-26-2009, 11:24 AM
o snap...that thing gonna be fast.......woo doggie

bowdown201
05-26-2009, 12:41 PM
Figured this would be a fun thread. For everyone to share with each other whats goin on with your ride. Whether you wash your ride or Just installed a B20 with a GSR tranny. Lets share.

sounds familiar

DSGMach1
05-26-2009, 01:32 PM
sounds familiar
You going to be cool and come to the meet tonight?

ACCORDPRIDE
05-26-2009, 01:38 PM
sounds familiar


and................ i think there was something else in that combo that was pretty potent:goodjob:

OldsTech
05-26-2009, 02:07 PM
Hitting it on the Nail ah!

Axon360
05-26-2009, 02:10 PM
clay bar, cleaner wax n carnauba wax'd most of my car. Still gotta do the driver's side and the trunk.

DarKStaR
05-26-2009, 02:13 PM
Looked at the gapping hole also known as empty engine bay. And stared at all the parts in my room :(

Axon360
05-26-2009, 02:17 PM
lowered a camaro

pix or it didnt happen:headslap:

DSGMach1
05-26-2009, 02:32 PM
and................ i think there was something else in that combo that was pretty potent:goodjob:
Interfooler?

ACCORDPRIDE
05-26-2009, 02:32 PM
Looked at the gapping hole also known as empty engine bay. And stared at all the parts in my room :(





:lmfao::lmfao::lmfao::lmfao::lmfao::lmfao::lmfao:: lmfao::lmfao:

try doin that for 2 years



it feels like im in jail

bowdown201
05-26-2009, 02:51 PM
I might swing by. depends on what this dude wants to do with this block im selling

slostang
05-26-2009, 02:52 PM
and................ i think there was something else in that combo that was pretty potent:goodjob:

lulz

HypnoToad
05-26-2009, 04:09 PM
pix or it didnt happen:headslap:


lol,it did

Motivation
05-26-2009, 05:02 PM
:lmfao::lmfao::lmfao::lmfao::lmfao::lmfao::lmfao:: lmfao::lmfao:

try doin that for 2 years



it feels like im in jail

Owning an Accord will do that to you...



*runs to see his DSM in the garage in the same shape as Travis' Accord... :( *

Just_CHill
05-26-2009, 06:51 PM
I tore my motor apart even more... :(


When you coming home bro?
I'll be home June 8th man. But only for a week.

NEMO
05-27-2009, 07:52 AM
I'll be home June 8th man. But only for a week.and we need to get some runs in while your back:ninja:

bowdown201
05-27-2009, 10:34 AM
that should make for some good runs

b16EG-HaTcH
05-27-2009, 11:29 AM
clay bar, cleaner wax n carnauba wax'd most of my car. Still gotta do the driver's side and the trunk.

nice if i can get the time when im not so busy w/ work i want to wash, clay bar and wax the subaru. i replaced the little thingy that goes in the valve stem that was leaking so now the tire doesnt go flat on the subaru also. might clean out the interior and vacuum (sp) it out today along w/ the whole wash and wax thing. but as far as the hatch is concerned still the same. i sold my amber corners and put factory clear/amber ones back in it. JUST WAITING ON SOME SPARK PLUGS WIRES TO MAGICALLY APPEAR SO I CAN START IT AGAIN......UHHHHH HMMMM *hint*hint* (chris) and i got the stuff out of brads wrecked hatch to put the back seats in it so i guess i could get busy on that. :yes:

OldsTech
05-27-2009, 11:56 AM
Busy, Busy,,, maintance out

b16EG-HaTcH
05-27-2009, 03:43 PM
^^^ :ninja: i think I see what u did there......scouts out

DSGMach1
05-27-2009, 05:22 PM
nice if i can get the time when im not so busy w/ work i want to wash, clay bar and wax the subaru. i replaced the little thingy that goes in the valve stem that was leaking so now the tire doesnt go flat on the subaru also. might clean out the interior and vacuum (sp) it out today along w/ the whole wash and wax thing. but as far as the hatch is concerned still the same. i sold my amber corners and put factory clear/amber ones back in it. JUST WAITING ON SOME SPARK PLUGS WIRES TO MAGICALLY APPEAR SO I CAN START IT AGAIN......UHHHHH HMMMM *hint*hint* (chris) and i got the stuff out of brads wrecked hatch to put the back seats in it so i guess i could get busy on that. :yes:
Wait what .... Honda....putting seats IN...What about teh weight reduction

Axon360
05-27-2009, 05:35 PM
^^^ :ninja: i think I see what u did there......scouts out

i'd like to see the sub when it's clean:bump:

Chris, do u run 93 in ur car cuz i gotta fill it up before u come back home, still on 1/2 tank, the same one u left me with











Civilians out...

b16EG-HaTcH
05-27-2009, 05:44 PM
^^^ :ninja: refer to my answer in the WL :ninja:

b16EG-HaTcH
05-27-2009, 05:45 PM
Wait what .... Honda....putting seats IN...What about teh weight reduction

no weight reduction here. i want it to be comfortable and STOCK, and not loud as shit b/c there is nothing to deaden the sound. i removed al the tar from the floor but everything else is going back in :goodjob: .

OldsTech
05-27-2009, 09:57 PM
I havn't done a damn thing I need to wash my truck and vacuum it bad.... Beeen to busy to even think about it.

Hey is anyone else having ant problems. Far as crawling all over your car. My yard is horrible right now. They say since it rained so much they are just trying to get somewhere dry. My cousin yard is the same way

HypnoToad
05-27-2009, 10:03 PM
nah i havent had any problems with ants,but im not around any trees either.

b16EG-HaTcH
05-27-2009, 11:27 PM
i heard that ants are attracted to shit, so you better watch the oldsmobile they might try and carry that mother fucker under ground to nourish their young, or build them a coccoon or some other insect type shit.

b16EG-HaTcH
06-11-2009, 08:43 PM
put my spark plug wires on it, put my door panels on it, put the back seats in it, and started it.

Just_CHill
06-11-2009, 08:51 PM
put my spark plug wires on it, put my door panels on it, put the back seats in it, and started it.
Good times.

b16EG-HaTcH
06-11-2009, 08:53 PM
tomorrow the steering wheel goes on and im gonna try and get the exhaust fixed.

Axon360
06-11-2009, 10:53 PM
cleaned she up again today, still gotta fully claybar she and put she in deh cyar show dis munday

OldsTech
07-26-2009, 10:33 PM
Well, I did a fair share of work to the cutlass today. I installed my rally pac guages. I had in the trunk of the car for about a year now. And changed my speedo cable. So now my speedo works. I got a 2 issues with the guages. My tach isn't working. But Im not sure how a diesel tach works on this car. I didn't wire it to work. But the wiring instrution is a gas engine. And the tach is acting like goin to work till the engine is running. It zeros when the key to turn to the on position and going to 500rpm during cranking. But once started its 0. I will dig into that later. And my voltage guage is INOP. That I thought would at least work. And this is funny. I know my car is SLOW. With the 350 diesel with like 150hp non turbo with a 3 speed tranny (th-350) and 2.14 rear end gear. So did a 1 mississippi 2 mississippi count from 0-60 on a fairly staight road. It was around 23 mississippi when I hit 60mph. And that was WOT. LOL. I think the speedo is right. I will check tomorrow. But I also have 28" tires in back. So that will throw it a couple of mph off. If ran the 1/4 mile with this car I might be at like 50mph trap LOL...