99 OBD2 GSR SWAP INTO MY 93 OBD1 DEL SOL

[kbiais]

BEFORE I BUY THIS SWAP IS THERE NETHING I NEED TO MAKE IT WORK IT BESIDES CONVERTING TO MANUAL IT COMES WITH ECU , WIRING HARNESS , AXELS , TRANS AND ENGINE SHOULD I BE ABLE TO JUST PULL MY D AND DROP IN THE B AND PLUG AND PLAY THANKS ALL KNOWLEDGE IS APPRECIATED

[1civic]

What motor is in your car now? You can't use the harness on the GSR it's OBD2, You need a small list of parts to make it work.

All 92-95 is Obd1

Obd1 Dizzy (gsr)
Obd1 Alternator
Obd1 Vtec harness (ex model civic) or (Delsol S)
Obd1 ECU (P72)

Those are just some things that come to mind but will get your started in the right path.. :cheers:

[kbiais]

YEA I GOT A D15 IN IT NOW
COULDNT I REPLACE MY HARNESS WITH THE OBD2 HARNESS THAT COMES WITH THE SWAP

[kbiais]

R U SAYING I NEED TO GO WITH A 92 - 95 GSR OBD1 B18C IN IT INSTEAD OF THE 99 GSR OBD2

[1civic]

Easy and cheaper to swap in the OBD1 GSR, :cheers:

[Barefoot]

R U SAYING I NEED TO GO WITH A 92 - 95 GSR OBD1 B18C IN IT INSTEAD OF THE 99 GSR OBD2use your current harness and add the wires for vtec.

[silversol]

the obd2 integra harness plugs right in to your delsol the obd2 harness is fine! you will need a obd1 gsr ecu and will need to wire in vtec and the knock sensor. thats all

[1civic]

use your current harness and add the wires for vtec.

His harness will not plug into the dizzy or alt.. :cheers:


the obd2 integra harness plugs right in to your delsol the obd2 harness is fine! you will need a obd1 gsr ecu and will need to wire in vtec and the knock sensor. thats all

Since when, His car is a 93... :screwy:

[silversol]

the integra harnness plugs that plug into the car are the same from 94-01 and they are the same as 92-95 civic and 93-97 delsols plugs! useing the obd2 harness will use the obd2 dizzy and alt will not be any problem. I have done this swap many times I know it will work i had a 98 gsr swap in my 93 sol. and used this combination

[1civic]

So your saying it has a single plug or dual plug on the driver side?

[silversol]

So your saying it has a single plug or dual plug on the driver side?
i think you are thinking about the 96-98 or the 99-00 civic harness which will not work in any other car but a 96-98 or 99-00 civic. but yes the obd2 integra harness will work in 94-01 integra 92-95 civic and delsol's. with his 93 he will need a obd1 ecu and run the vtec,knock, wireing.

[1civic]

i think you are thinking about the 96-98 or the 99-00 civic harness which will not work in any other car but a 96-98 or 99-00 civic. but yes the obd2 integra harness will work in 94-01 integra 92-95 civic and delsol's. with his 93 he will need a obd1 ecu and run the vtec,knock, wireing.

Delsol being the only car this works on.. Umm. I'll make not of that, Never tried it.. :cheers:

[silversol]

Delsol being the only car this works on.. Umm. I'll make not of that, Never tried it.. :cheers:
It will also work on 92-95 civics with a obd1 ecu
or a 94-95 integra with a obd1 ecu :goodjob:

[Starrfire]

Silversol is right. My friend has an obd2 integra harness in his obd1 civic right now.

[1civic]

It will also work on 92-95 civics with a obd1 ecu
or a 94-95 integra with a obd1 ecu :goodjob:
Sol, I had to go look...lol. The harness on my hatch is from a Delsol but the Delsol had a swap and guess what it is? lol

Later!!

[Vteckidd]

OBD2 Engine Harness (since in OBD1 CIvics and any integra they clip in on the shock tower) should work and allow you to use the standard distributor.

I was with bobby for a min till i thought about it. Easy to get confused cause when you see OBD2 HARNESS into OBD1 you automatically think about the problems the OBD2 CIVIC harnesses have, not the integra.

[1civic]

I was with bobby for a min till i thought about it. Easy to get confused cause when you see OBD2 HARNESS into OBD1 you automatically think about the problems the OBD2 CIVIC harnesses have, not the integra.

I had to go look at one of my cars...lmao!!

[kbiais]

preciate it fellas

[kbiais]

so exna the obd2 ecu for a obd1 ecu and it should work

[1civic]

so exna the obd2 ecu for a obd1 ecu and it should work

Yes, But you also have to add wires for Vtec, Knock Sensor.. :goodjob:

[wrekonize]

i had a 2000 gsr swap with the 2000 obd2 harness on motor and pluged right into the 93 civic all i wired was knock, vtec, and that little blue wire from the dizzy to my cluster so i would have rpm

[kbiais]

coo well it was either find out hoe to do it or go get this obd1 gsr with auto trans they r both around same price range just not sure if i wanna swap out for a manual yet thanks again guys all help was greatly appreciated