3bar map sensor

[jadakid88]

well basically my my questin is does it matter which 3.4 gm i get the 3 bar from or can i get the one that is required on any 3.4 gm that i come across with the required sensor...


thanks in advance

[1civic]

AC Delco part numbers 213-1562 or GM 12223861

[jadakid88]

and what models does that one come on and thanks again for the feedback
AC Delco part numbers 213-1562 or GM 12223861

[1civic]

1989 turbo T/A..
Haven't kept the info around but most GM's use 1 and 2 bar maps..
Google the part numbers I posted, you will find a ton of info.. :cheers:

[EmminoDaGreat]

Instead of just debo'in one off a car, just go to summit, etc ask for the part number listed, it will be just as cheap, and you will for sure get a 3 bar, and not a 1 or 2 bar...

[jadakid88]

lol....i asked because we have a couple of gm motors at my job that were pulled for other problems so thats why i asked free out weighs paying anyday and it still has the harness on it so theres my pig tails
Instead of just debo'in one off a car, just go to summit, etc ask for the part number listed, it will be just as cheap, and you will for sure get a 3 bar, and not a 1 or 2 bar...

[EmminoDaGreat]

true, im not much on used map sensors tho, do you have a built motor, if not why do you want to run more than 12 psi, if you do then I have the answer already...lol...

[jadakid88]

pmed...:ninja:
true, im not much on used map sensors tho, do you have a built motor, if not why do you want to run more than 12 psi, if you do then I have the answer already...lol...

[jadakid88]

ok also now that i have found the sensor where would i start find the pigtail

[jadakid88]

thansk a whole lot man... repped
1989 turbo T/A..
Haven't kept the info around but most GM's use 1 and 2 bar maps..
Google the part numbers I posted, you will find a ton of info.. :cheers:

[1civic]

If you get it from GM you can get the pig tail.. Also I think MSD sells it with a Pig tail.. :cheers: