Log in

View Full Version : Parting out 94 champ white hatch w/ BUILT TURBO D


Dirka Dirka
05-18-2009, 06:19 PM
Like i said i am parting out the entire car....Built the motor less than a month ago with plans to make 400 whp and bought all the parts to do so.... The motor is completely, and the turbo setup just lacks little things. But here are some pics.....

car is a 94 civic dx hatch
vin available upon request.

For the shell im gonna set the price at 1k obo. Just make me an offer. It comes with dropzone struts and eibach springs. Also, paint is really fresh and champ white

Motor is a d16z6 with a d16y8 intake manifold. It has je pistons, eagle rods, arp headstuds and rodbolts. It comes with rc750cc injectors, or stock if you prefer. I just put in some ngk spark plugs heat range 7, and ngk blue spark plug wires. The trans is a ex/si transmission equipped a competition clutch stage 4 clutch w/ a resurfaced oem flywheel. Avid Solid motor mounts

Id prefer to sell the motor and trans with everything listed above for 2500 obo.

As for the turbo setup at first i wanna keep it all together and im gonna set the price at 1600 obo.

Here is a picture of the hatch before it was wrecked.....i bought all the body parts needed to repair the front end....however it still does need a new core support and possibly a new apron.

http://i299.photobucket.com/albums/mm310/erictucker12/IMG_1455_Medium.jpg?t=1242684216

here you can see the damage that was caused in the wreck...also, i have a clean title in hand.

http://i299.photobucket.com/albums/mm310/erictucker12/HPIM0509.jpg?t=1242684459

Here is a picture of the block while it was being built.... It was built with JE pistons, Eagle Rods, and ALL OEM HONDA BEARINGS. None of that garbage acl or king stuff, :goodjob: Motor has 0 miles on it.

http://i299.photobucket.com/albums/mm310/erictucker12/HPIM0513.jpg?t=1242684538

http://i299.photobucket.com/albums/mm310/erictucker12/HPIM0515.jpg?t=1242684775

Motor also has arp head studs

http://i299.photobucket.com/albums/mm310/erictucker12/HPIM0516.jpg?t=1242684803

The head is stock, just been hot tanked and got an 5 angle valve job

http://i299.photobucket.com/albums/mm310/erictucker12/HPIM0518.jpg?t=1242684851

Here is the only picture i have of the trans. It has been degreased like a motherF! So now its cute and shiny. lol

http://i299.photobucket.com/albums/mm310/erictucker12/GEDC0789.jpg?t=1242684982

Now, on to the turbo setup

Garrett t3/t4 50trim w/ 82 hotside. The turbo has absolutely NO shaftplay!!!

http://i299.photobucket.com/albums/mm310/erictucker12/HPIM0501.jpg?t=1242685156

Next is a Pfab t3/t4 Turbo manifold for a d series
http://i299.photobucket.com/albums/mm310/erictucker12/HPIM0500.jpg?t=1242685184

http://i299.photobucket.com/albums/mm310/erictucker12/HPIM0498.jpg?t=1242685215

Next up is a tial 38mm wastegate w/ 8lb spring
http://i299.photobucket.com/albums/mm310/erictucker12/HPIM0499.jpg?t=1242685252

1 of 2 of my intercoolers, this is the smaller of the two. I'll have to find the other and post up some pics of it.
http://i299.photobucket.com/albums/mm310/erictucker12/GEDC0803.jpg?t=1242685352

3" downpipe
http://i299.photobucket.com/albums/mm310/erictucker12/HPIM0502.jpg?t=1242686466

HKS 'style' BOV with flange
http://i299.photobucket.com/albums/mm310/erictucker12/HPIM1026.jpg?t=1242686821

GReddy Profec B Spec II
http://i299.photobucket.com/albums/mm310/erictucker12/HPIM1027.jpg?t=1242686870

And what it looks like all bolted up
http://i299.photobucket.com/albums/mm310/erictucker12/HPIM0523.jpg?t=1242686980

Thanks for looking and make me an offer!!! Also willing to trade any and or everything.
The BUCKY
05-18-2009, 06:22 PM
what you want for the profec b??
bpoweredhatch
05-18-2009, 06:23 PM
nice stuff gl with sale. you should keep it
Berta
05-18-2009, 06:27 PM
nice gear!!!
Starrfire
05-18-2009, 06:46 PM
Nice stuff, touched it with my own two hands. The car is an easy fix, No frame damage, all sheet metal screwed up from hitting a deer. There is a whole lot of time and money in the car.
Nateds16
05-18-2009, 06:52 PM
damn looks good. like how you did the hood i did my del sol like that too.
Dirka Dirka
05-18-2009, 07:03 PM
nice stuff gl with sale. you should keep it

Id like to, but i ran out of money to tune, and im not sure i wanna be in the scene anymore....just testing the waters and was gonna see what i could get out of it
Dirka Dirka
05-18-2009, 07:06 PM
what you want for the profec b??

I dont really wanna part that out just yet....would rather let it go with the rest of the turbo stuff all together, but if and when i do decide to sell it i'll let you know.
The BUCKY
05-18-2009, 07:33 PM
kool. i know someone that may want the shell also
bpoweredhatch
05-18-2009, 07:40 PM
Id like to, but i ran out of money to tune, and im not sure i wanna be in the scene anymore....just testing the waters and was gonna see what i could get out of itman you better keep this setup and get 420 when you can and tune it. why go though so much to put it together then sell it.pm me if you know how to put a motor together also
dc2killa
05-18-2009, 07:49 PM
nice stuff man...
Dirka Dirka
05-18-2009, 07:51 PM
kool. i know someone that may want the shell also


good deal! Tell'em to holler at me.
terrytowe22
05-18-2009, 07:51 PM
nice motor man i will trade u a jetta vr6 for the motor lmk?
p3tey2
05-18-2009, 07:55 PM
nice stuff
ueyedgr8tness
05-18-2009, 08:00 PM
pm in your box sir
lcortes32
05-18-2009, 08:06 PM
nice how much for shell..??
lcortes32
05-18-2009, 08:08 PM
^^^^sorry just saw the price
Starrfire
05-18-2009, 08:13 PM
man you better keep this setup and get 420 when you can and tune it. why go though so much to put it together then sell it.pm me if you know how to put a motor together also

You don't know eric tucker very well:lmfao:,With that said, I do....


nice motor man i will trade u a jetta vr6 for the motor lmk?


And no, He doesn't want your Jetta. :gay:
ueyedgr8tness
05-18-2009, 08:15 PM
sitting on a 400whp s13 he might be interested in if he got some $ on top of everything he just posted:)
-S Double C-
05-18-2009, 08:33 PM
noooo dont sell it bro finish it so we can hit up the track and whoop some of the 600whp b series asses!
big mac
05-18-2009, 09:33 PM
How much for the turbo?
Dirka Dirka
05-18-2009, 09:35 PM
noooo dont sell it bro finish it so we can hit up the track and whoop some of the 600whp b series asses!

lol. I probably will, just wanted to test the waters and see what i could get. I may take it to mainstream and use some of that plastic money. :ninja: lol
jap_racer1
05-18-2009, 09:38 PM
how much for the intercooler??? lmk pm me
big mac
05-18-2009, 09:39 PM
Sell me the turbo though
Dirka Dirka
05-18-2009, 09:41 PM
how much for the intercooler??? lmk pm me for the one that is pictured i can do 60 picked up or 70 shipped
-S Double C-
05-18-2009, 10:08 PM
lol. I probably will, just wanted to test the waters and see what i could get. I may take it to mainstream and use some of that plastic money. :ninja: lol

do it I PROMISE you it will be worth it. My last set up at 280whp in my heavy ass 2600lbs DD coupe outran a 410whp built b16 2000lb eg hatch.
Burnz1one
05-18-2009, 10:12 PM
part the turbo?
marcos713
05-18-2009, 10:26 PM
Bump for a looking!
Great setup! I say keep it tune it!
marcos713
05-18-2009, 10:45 PM
Bump for a looking!
Great setup! I say keep it tune it!
justahatch09
05-18-2009, 11:12 PM
how much for fenders tucker? bump
Dev
05-18-2009, 11:15 PM
dude seriously dont get rid of it cause i wanna see it finished! and you know if you finish it you will love it!
NEMO
05-18-2009, 11:16 PM
pm'd
i4_garage
05-18-2009, 11:32 PM
GLWS.

ACL junk? lol
big mac
05-19-2009, 11:23 PM
hey man let me know a price on the turbo and it the injectors will fit a b series
Dirka Dirka
05-19-2009, 11:33 PM
They will....but i think im just gonna keep it. Finished the wire tuck today and think im just gonna sit on it a little while longer
big mac
05-19-2009, 11:39 PM
aight well let me know ill get those injectors
jrrider72
05-20-2009, 05:33 AM
wutz ur # for i can hit u up on the shell
KillTheCrow
05-20-2009, 11:51 AM
They will....but i think im just gonna keep it. Finished the wire tuck today and think im just gonna sit on it a little while longer
Thank god I was about to be like come on man!
tinkolby_25
05-20-2009, 12:07 PM
he wasnt ever gonna sell it
he just wanted to tease you guys :ninja:
Dirka Dirka
05-20-2009, 05:01 PM
Thank god I was about to be like come on man!

hahhahaha...i know right?? When it came down to it i just couldnt do it. lol
jadakid88
05-20-2009, 05:17 PM
are the injectors saturated or peak and hold?
kaotickaozpunk
05-20-2009, 08:56 PM
mAN I WANT THAT SHELL..AWESOME PRICES BUMP FOR YOU BRO!!!!!!
titoeg16psi
05-20-2009, 09:47 PM
bump 4 my first hatch i miss it
p3tey2
05-21-2009, 04:49 PM
are u selling the dash? if so pm a price
Dirka Dirka
05-21-2009, 05:41 PM
are u selling the dash? if so pm a price

No nothing is for sale.....decided to keep.
-S Double C-
06-03-2009, 09:26 PM
now im getting id of all my stuff lol
gerardojdm
06-04-2009, 12:04 AM
call me 4042271993 asap
LSVTECEJ
06-14-2009, 07:47 PM
hit me up with a pm so we can talk im building single cam and need rods and sum other odds and in. i got cash or can do tradeing
BlazinBubble
06-14-2009, 08:09 PM
im really glad u decided to keep it...
civic gsr
06-14-2009, 11:49 PM
WAT HAPPEN WITH THE LIP ???
brokecivic
06-15-2009, 12:45 AM
wanna sell your hood and hatch pm me if so :)