exhaust or no exahust???

[stevo_EF91]

so the "exhaust" on my car rigt now comes from the header into straight pipe that curves to right under the passenger side about half way down the car then stops.... thats it.

was just wondering if it would be bennifical to get a full 3" mandrel bent exhaust all the way back or if the performance would be the same , but it would be just an aesthetic thing

thanks for any help

[Ed]

what size are you running now? 2.5?

[stevo_EF91]

what size are you running now? 2.5?

i believe its a 3" but its like 2 feet long and just pops out the driver side. it was something kinds of rigged up because the previous owner was running straight front the header with no exhaust whatsoever.

[Motivation]

I believe honestly you are going to yield the same power if you have it stopped where it is at now, or run it out the back by making pipe longer. If it is the same diameter. Mine ran 3" from turbo to midway back on car to a down pipe.

[SiRed94]

I believe that you should make a 3" exhaust that starts at the exhaust flange on the turbo, then cut a hole in the side of your front bumper and make it exit there.

[BTEC]

I believe that you should make a 3" exhaust that starts at the exhaust flange on the turbo, then cut a hole in the side of your front bumper and make it exit there.
lmao!!!!! :goodjob:

[Bruce Leroy]

What kind of car. Is is turboed? Doesn't sound like it from your posts.

[SiRed94]

What kind of car. Is is turboed? Doesn't sound like it from your posts.

Lol, Troof....

[stevo_EF91]

91 civic hatch.. d16z6 swap... yes turbo

[turbob20]

i went 3" from turbo with vbands and then exited mine for that year 95 hatch out the pass side infront of tire and welded a rectangular 2"x7.5 inch wide tip for clearance because if you get caught youll get a fine for the exhaust not exiting the car. good luck with it and dont get carbon monoxide poisoning lol.

[stevo_EF91]

i went 3" from turbo with vbands and then exited mine for that year 95 hatch out the pass side infront of tire and welded a rectangular 2"x7.5 inch wide tip for clearance because if you get caught youll get a fine for the exhaust not exiting the car. good luck with it and dont get carbon monoxide poisoning lol.

ahh carbon manoxide poisoning ! guess ill just run it all the way back. i feel like being a little traditional

[93delsol15]

i went 3" from turbo with vbands and then exited mine for that year 95 hatch out the pass side infront of tire and welded a rectangular 2"x7.5 inch wide tip for clearance because if you get caught youll get a fine for the exhaust not exiting the car. good luck with it and dont get carbon monoxide poisoning lol.

speaking of carbon monoxide poisoning i was out in my sol last night and i am runnin open down pipe and it started raining so i rolled my windows up to make a long story short i started getting light headed made it home and passed out on the couch and did not wake up for about 18 hours... so yeah do the full exhaust haha

[81911SC]

http://www.buy.com/retail/product.asp?sku=30195248&listingid=39082900&dcaid=17902

[slostang]

http://www.buy.com/retail/product.asp?sku=30195248&listingid=39082900&dcaid=17902

rotflcopter

[stevo_EF91]

http://www.buy.com/retail/product.asp?sku=30195248&listingid=39082900&dcaid=17902

nice price :)

[rbsilvia]

damn!!! you ok???lol 18 hrs. wow. glad you woke up!!!