View Full Version : N/A 4&6 cyl whoreslounge
allmotorX
05-15-2009, 08:21 PM
Basically this thread is to set up a good time and place to run within the next month or so and also for people with na cars to callout who they want to run without making millions of threads
allmotorX
05-15-2009, 08:33 PM
yo snail june 19 is a friday i think it should be on a tues or wed
TheSnail
05-15-2009, 08:37 PM
Oh, I was picking friday, but I guess you are right. How about the 23rd, give people an extra week.
jerseyef9
05-15-2009, 08:40 PM
:lmfao: can i play since i am goin all motor too
jerseyef9
05-15-2009, 08:58 PM
can wait to see you out nemo
allmotorX
05-15-2009, 09:15 PM
can wait to see you out nemox2 ill have something that may be a better match for you then again maybe not:ninja:
allmotorX
05-15-2009, 09:16 PM
Oh, I was picking friday, but I guess you are right. How about the 23rd, give people an extra week.23 will be cool with me gives me enough time to do what i need to do im looking forward to running you with my new setup
allmotorX
05-15-2009, 09:17 PM
:lmfao: can i play since i am goin all motor toostop making fun of us n/a guys
Grimm Reeper
05-15-2009, 09:23 PM
I'm down
TheSnail
05-15-2009, 09:39 PM
23 will be cool with me gives me enough time to do what i need to do im looking forward to running you with my new setup
Sounds good, I dont think anthing will be diff from last time other then -100lbs, that header and a tune. So it wont be that much different.
allmotorX
05-15-2009, 09:39 PM
I'm downi was hoping you'd drop in you get ya valves yet
allmotorX
05-15-2009, 09:40 PM
Sounds good, I dont think anthing will be diff from last time other then -100lbs, that header and a tune. So it wont be that much different.if you keep shedin weight you wont have a car pretty soon
Grimm Reeper
05-15-2009, 09:46 PM
I'll see tomorrow, if jap_racer comes to that JDM Meet in Roswell, if not, I'll have to hit Ferrea up again :D
TheSnail
05-15-2009, 10:11 PM
if you keep shedin weight you wont have a car pretty soon
LOL true, though I still have carpet, speakers, ac/heat crap behind the dash, but Im just taking things off that I can put back on for when I sell it eventualy. Im debating that as well, I would make more parting out the motor than selling the car whole. Several people got theirs down to the 1700-1800lb range fully fully stripped. But those guys are running 12.7ish with 15-20whp less then me, so I have been debating for the past few months on stipping it to the point of no return.
HypnoToad
05-15-2009, 10:20 PM
what if u have a V8 with 4cyl power :ninja:
TheSnail
05-15-2009, 10:22 PM
I just went to look for the times they posted:
seems i have been forgotten. haha.
60' - 1.850
1/4 - 12.865 @ 103.25 mph
this was at 189whp sr20ve with sr16ve(blue) cams. i have heard rumors someone went faster, but havent seen the proof. this run was at carlsbad a few years ago. its amazing what you can do with a 1700lb sentra.
So 12.8ish rather than what I said
TheSnail
05-15-2009, 10:23 PM
what if u have a V8 with 4cyl power :ninja:
4 cyl Torque?
HypnoToad
05-15-2009, 10:24 PM
4 cyl Torque?
maybe i heard that B20 is a TQ monster
Grimm Reeper
05-15-2009, 11:07 PM
lulz @ Toad
tdurr
05-15-2009, 11:16 PM
psh. i wish my car was able to keep up with u ppls... i guess ill come watch. maybe run the slow cars :hanged:
rumpRo&st@
05-15-2009, 11:23 PM
i would love to come and watch the next one of these events! sadly, i won't be racing anyone unless anyone has a car that is making what my protege is making
blackshine007
05-15-2009, 11:24 PM
^^Damn, you still alive?
rumpRo&st@
05-15-2009, 11:26 PM
yisser. the car still running good? i remember you had that nice lil v6 in it that revved to 9 grand, lol
blackshine007
05-15-2009, 11:28 PM
yisser. the car still running good? i remember you had that nice lil v6 in it that revved to 9 grand, lol
It never rev'd to 9k, sir. And yes, it's still running. Call me, fool!
allmotorX
05-15-2009, 11:51 PM
It never rev'd to 9k, sir. And yes, it's still running. Call me, fool!i just did
blackshine007
05-15-2009, 11:54 PM
^^Should've never traded it. I told you how to fix it too....
allmotorX
05-16-2009, 12:01 AM
^^Should've never traded it. I told you how to fix it too....what the hell you talkin bout
blackshine007
05-16-2009, 12:09 AM
I dunno. You went to the Junkyard yet? I got the E fan on the monster working good, now!
allmotorX
05-16-2009, 12:20 AM
I dunno. You went to the Junkyard yet? I got the E fan on the monster working good, now!Nah havent went yet i gotta go so i can get a throttle cable and idk what else i need i got the motor today im just waiting on the pistons so i can take it to your guy:D
UpSideDownDesi
05-16-2009, 01:07 AM
dyno day june 20th and hitting the track on 21sth...start making your callout list for the track.
KevinT707
05-16-2009, 01:23 AM
I'm down
Me & you still have some unfinished business to settle buddy :D
x2 ill have something that may be a better match for you then again maybe not:ninja:
i wanted to run your crx i thought that we would have been a good run.
On_Her_Face
05-16-2009, 02:38 AM
When I saw this thread I thought WHAT THE FUCK? Carry on.
allmotorX
05-16-2009, 03:18 AM
i wanted to run your crx i thought that we would have been a good run.my new setup should be faster than that i hope
allmotorX
05-16-2009, 01:36 PM
Well got my pistons in the mail today and they are the wrong fucking size gah dammit lil delay in my build
GaGen2Teg
05-16-2009, 03:22 PM
ill be down...got my shit running right finally! no more check engine light, oil leaks, and my vtec works again horry lol...ill be down to run the slower cars.
allmotorX
05-16-2009, 04:10 PM
im porlly going to keep the pistons i got since my block has no scars and boring it basically just ups the compression which means ill hav e to either get a thinner head gasket or shave a lil more off the head
AnthonyF
05-16-2009, 07:06 PM
I've got an all motor 4cyl if anyone is interested.... :ninja: :goodjob:
-Ant.
GaGen2Teg
05-16-2009, 07:21 PM
I've got an all motor 4cyl if anyone is interested.... :ninja: :goodjob:
-Ant.
No Bikes :crazy:
AnthonyF
05-16-2009, 07:25 PM
^what u talkin about? :ninja: You guys said 4cyl, N/A . Dats what I gots.
-Ant.
allmotorX
05-16-2009, 07:31 PM
dammit im dumb the pistons are the correct size yay!!
allmotorX
05-16-2009, 07:32 PM
^what u talkin about? :ninja: You guys said 4cyl, N/A . Dats what I gots.
-Ant.must have 4wheels:goodjob: ;)
IndianStig
05-16-2009, 07:32 PM
GaGen2Teg what you running? I'll show if you are down to run and if I still have my car.
GaGen2Teg
05-16-2009, 07:36 PM
^what u talkin about? :ninja: You guys said 4cyl, N/A . Dats what I gots.
-Ant.
lol i was just jokin should get some bikes to go!
GaGen2Teg what you running? I'll show if you are down to
run and if I still have my car.
Just a puiny lil b17 with some bolt ons...what you running?
allmotorX
05-16-2009, 07:37 PM
lol i was just jokin should get some bikes to go!
Just a puiny lil b17 with some bolt ons...what you running?me and you should be a good match 1.6 vs 1.7
GaGen2Teg
05-16-2009, 07:39 PM
me and you should be a good match 1.6 vs 1.7
Built D vs B17 with bolt ons....Yeah should be alright depends on how light your car is going to be lol
IndianStig
05-16-2009, 07:40 PM
i just have an i/e h22 in a cb7, you'd prolly beat me
allmotorX
05-16-2009, 07:41 PM
Built D vs B17 with bolt ons....Yeah should be alright depends on how light your car is going to be lolb20 with crower 404 cams:goodjob:
GaGen2Teg
05-16-2009, 07:45 PM
i just have an i/e h22 in a cb7, you'd prolly beat me
Im Game
GaGen2Teg
05-16-2009, 07:46 PM
i just have an i/e h22 in a cb7, you'd prolly beat me
Im Game
b20 with crower 404 cams:goodjob:
My bad thought you was buildin a D
Yeah thatll be a good match up
allmotorX
05-16-2009, 08:04 PM
Im Game
My bad thought you was buildin a D
Yeah thatll be a good match upye ai like to throw people off a lil;)
TheSnail
05-16-2009, 08:37 PM
I got to get my radiator fans working. Im used to having no a/c as all my previous cars, but now with out the radiator fans working Im running the heat on full blast to keep the car from overheating in stop and go traffic. Its like 130deg in that mother fucker. It was fine during winter time, but now in the summer I stopped driving it because its unbearable. The gf about put my draws strait in the dryer thinking they were washed before I let her know about the oven on 4 wheels.
HypnoToad
05-16-2009, 08:42 PM
Built D vs B17 with bolt ons....Yeah should be alright depends on how light your car is going to be lol
how bout 1.7 vs 5.0?
HypnoToad
05-16-2009, 08:44 PM
I got to get my radiator fans working. Im used to having no a/c as all my previous cars, but now with out the radiator fans working Im running the heat on full blast to keep the car from overheating in stop and go traffic. Its like 130deg in that mother fucker. It was fine during winter time, but now in the summer I stopped driving it because its unbearable. The gf about put my draws strait in the dryer thinking they were washed before I let her know about the oven on 4 wheels.
i feel ur pain my fan isnt working,gotta fix it tomorrow.....
GaGen2Teg
05-16-2009, 08:52 PM
how bout 1.7 vs 5.0?
sure lol
AnthonyF
05-16-2009, 09:03 PM
must have 4wheels:goodjob: ;)
It does. 2 spares at home.
me and you should be a good match 1.6 vs 1.7
No match for my 4.0L MUH HAHAAH. Im just keeding.
Me and the red civic sedan(or coupe, can't remember) was a good run. My big ol slow ass truck almsot kept up.
-Ant.
AnthonyF
05-16-2009, 09:04 PM
I got to get my radiator fans working. Im used to having no a/c as all my previous cars, but now with out the radiator fans working Im running the heat on full blast to keep the car from overheating in stop and go traffic. Its like 130deg in that mother fucker. It was fine during winter time, but now in the summer I stopped driving it because its unbearable. The gf about put my draws strait in the dryer thinking they were washed before I let her know about the oven on 4 wheels.
Why not get some e=fans of of ebay? Thats what I did. 2 10" fans for like 70 bucks. I've had them on my truck for like 8-9 months now.
-Ant.
TheSnail
05-16-2009, 09:11 PM
I should do 40 2x2" computer fans to be different lol. Never know, it might end up being the mod everyone does in the future.
AnthonyF
05-16-2009, 09:23 PM
I should do 40 2x2" computer fans to be different lol. Never know, it might end up being the mod everyone does in the future.:lmfao::lmfao::lmfao::lmfao::lmfao::lmfao:: lmfao:
HAHAHAHAHAHAH WTF!!LOLOL
+35
-Ant.
IndianStig
05-16-2009, 09:30 PM
Attention TheSnail: you need a new sig pic.
AnthonyF
05-16-2009, 09:33 PM
^no way. I don't get it, but it's just so random. I remember seeing this a lot associated with the SpeedMonkey crew....
-Ant.
allmotorX
05-16-2009, 09:33 PM
Attention TheSnail: you need a new sig pic.x2;)
HypnoToad
05-16-2009, 09:43 PM
sure lol
snazy,ur probbly faster than me...lol
and u can say u beat a V8,lol
GaGen2Teg
05-16-2009, 09:49 PM
snazy,ur probbly faster than me...lol
and u can say u beat a V8,lol
Im down to run anyone that thinks itll be a good race:goodjob:
allmotorX
05-16-2009, 09:51 PM
Im down to run anyone that thinks itll be a good race:goodjob::ninja: :ninja:
HypnoToad
05-16-2009, 09:52 PM
Im down to run anyone that thinks itll be a good race:goodjob:
yea me too,kinda sad saying a drive a V8 camaro that runs high 15s:(
GaGen2Teg
05-16-2009, 09:55 PM
i run high 16s:ninja:
HypnoToad
05-16-2009, 09:56 PM
i run high 16s:ninja:
i ran a 18..................spinning through the 8th,lol
my new setup should be faster than that i hopewell you will probably be to much for me
allmotorX
05-17-2009, 04:32 AM
^^we can still run for the hell of it
blackshine007
05-17-2009, 12:34 PM
^^When we gonna run?
allmotorX
05-17-2009, 12:53 PM
^^When we gonna run?whenever you come measure theses pistons for me and my pmas on back order ill let you know when i get em i hope you gone be strapped up tight son
blackshine007
05-17-2009, 02:01 PM
^^Don't be wasting my time :2up:
allmotorX
05-17-2009, 02:18 PM
kick rocks biotch!!!
allmotorX
05-23-2009, 09:39 AM
Might have to push this back to the end of june
tofu-eg
05-23-2009, 06:04 PM
where is this going to be held??i might come and play too..lmk
jerseyef9
05-23-2009, 06:50 PM
when i come out i want some of the action
allmotorX
05-23-2009, 07:46 PM
where is this going to be held??i might come and play too..lmkwe will set a date at the beginning of june
TheSnail
05-23-2009, 09:24 PM
Hows the new ride coming along B16?
allmotorX
05-23-2009, 09:30 PM
Hows the new ride coming along B16?Well honestly my parts are taking to damn long to get here i have over 1500 in parts coming and i only gotten like 2 things so far but my block is getting work done and my head is getting worked on as we speak. basically once i get these parts ill be on a roll. But i should be making more power with my new setup. And way more torque:D might even be more than you lol hoping to get close to 200whp as i can with all the shit i bought and all the researc ive done i should be damn close well not that close since i only made 175whp with the b16 tuned and 114 wtq:cry: but to answer your question its coming along
TheSnail
05-23-2009, 10:02 PM
Sounds good Sir. If things being shipped end up taking too long and you can not make it, we can post pone the callout 1-2 weeks. I want you to be out there, we have some unsettled buisness to take care of ;), and Im sure your new car will be even more impressive then the last.
allmotorX
05-23-2009, 10:51 PM
Hell yea lol imma try my best to make it to this callout I just need to get tuned first cause If I run on a basemap ill blow that bitch to hell and back
GaGen2Teg
06-04-2009, 12:29 PM
this place is dead.............lol
allmotorX
06-04-2009, 02:42 PM
this place is dead.............lolhell yeah it is i just need to getmy swap in and tuned and ill be good to go once everything is assembled and shit like that
allmotorX
06-12-2009, 01:17 AM
keep hope alive
Siverprobegt
06-12-2009, 12:14 PM
Well honestly my parts are taking to damn long to get here i have over 1500 in parts coming and i only gotten like 2 things so far but my block is getting work done and my head is getting worked on as we speak. basically once i get these parts ill be on a roll. But i should be making more power with my new setup. And way more torque:D might even be more than you lol hoping to get close to 200whp as i can with all the shit i bought and all the researc ive done i should be damn close well not that close since i only made 175whp with the b16 tuned and 114 wtq:cry: but to answer your question its coming along
Personally i dont think your going to make more power & tq..Just my opinion..
Surprize me :D
allmotorX
06-12-2009, 06:13 PM
Personally i dont think your going to make more power & tq..Just my opinion..
Surprize me :Dlol that what i want you to think i gurantee i make more trq i might be just a hair off with horsepower then again maybe not
allmotorX
06-13-2009, 08:33 AM
be on the road soon
Grimm Reeper
06-18-2009, 03:48 PM
blah!!!!!!!!!!!!!!!!!!!
Powered by vBulletin® Version 4.2.2 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.