PDA

View Full Version : Mazda RX3 wheels



Andy_013
05-12-2009, 11:08 PM
Does anyone know the specs of a mazda rx3 wheels (mainly bolt patterns)?

F8d2Blk
05-13-2009, 07:59 AM
My guess would be the same as the datsuns? 4 x 114.3 but not 1000% sure.

Andy_013
05-13-2009, 11:14 AM
^ thanks, that means I going to have two different type of wheels :(

Me86Rob
05-13-2009, 11:58 AM
My guess would be the same as the datsuns? 4 x 114.3 but not 1000% sure.
yea 1000% wrong

R100, RX-2, RX-3, RX-4, older 929s, RWD 323s, RWD 626s and Series 1/2 RX-7 use a 4x110 bolt pattern. so pretty much you can use wheels from those cars unless you want to go aftermarket. the closest thing is ford's 4x108 bolt pattern, like on foxbody mustangs. but its not even close enough to make work.

Andy_013
05-13-2009, 10:24 PM
yea 1000% wrong

R100, RX-2, RX-3, RX-4, older 929s, RWD 323s, RWD 626s and Series 1/2 RX-7 use a 4x110 bolt pattern. so pretty much you can use wheels from those cars unless you want to go aftermarket. the closest thing is ford's 4x108 bolt pattern, like on foxbody mustangs. but its not even close enough to make work.

thanks, this helped alot!

F8d2Blk
05-14-2009, 09:20 AM
yea 1000% wrong

R100, RX-2, RX-3, RX-4, older 929s, RWD 323s, RWD 626s and Series 1/2 RX-7 use a 4x110 bolt pattern. so pretty much you can use wheels from those cars unless you want to go aftermarket. the closest thing is ford's 4x108 bolt pattern, like on foxbody mustangs. but its not even close enough to make work.

I knew the 80's rx7's were 4 x 114 so I guess I figured those older ones were the same. Sorry for the bad info. ;)

RGRacing
05-23-2009, 12:29 AM
yea 1000% wrong

R100, RX-2, RX-3, RX-4, older 929s, RWD 323s, RWD 626s and Series 1/2 RX-7 use a 4x110 bolt pattern. so pretty much you can use wheels from those cars unless you want to go aftermarket. the closest thing is ford's 4x108 bolt pattern, like on foxbody mustangs. but its not even close enough to make work.
All the oldies, SA & FB use 4x110 - 1984 and 1985 RX7 GSL-SE is 4x114.3!

87 Turbo II
05-23-2009, 02:22 AM
I have 3 4X110 wheels you could come get for like $20, but the 4th one is my spare.

Stock FB wheels, 13 by 5

http://i108.photobucket.com/albums/n15/eastermonkey/FB/IMG_0028.jpg

nisman
06-12-2009, 08:24 AM
http://i437.photobucket.com/albums/qq91/scrapinsentra/rx7/rx7.jpg
4x108 redrilled to 110 with shank style lug nuts (old cragers, etc. and toyota mag style lug nuts..) not saying its the safest route, but they have held up for me so far. only problem you will have is that the offset even on a foxbody is typically too positive for a mazda (atleast with mine, 15x7 35 offset, i still needed a small spacer up front.)