kpowerhatch new ls vtec build

[bpoweredhatch]

well after thinking and thinking i decided to go with a ls vtec.hoping i can have all the parts and have it at the machine shop this week so they can put it together for me. i came across a great deal and picked up a 84mm aebs sleeved b18b1 block with the crank and new bearings.pics are below and please wish me the best of luck on this build im ready to make some serious power again.also for the ones viewing this if you or know anyone with the following things pm me a number asap.....here is a link about the guy and my block i got from him. for the people that know him over in middle tennessee should know who he is.....http://images.google.com/imgres?imgurl=http://farm4.static.flickr.com/3075/2682587337_bf9d74dfdf.jpg&imgrefurl=http://www.miles-magazine.com/wordpress/2008/07/20/sleeper-status/&usg=__jlFOeUn1DDOW1GUKXvJHb3zQPjM=&h=333&w=500&sz=123&hl=en&start=1&tbnid=_LFzfywpaybJwM:&tbnh=87&tbnw=130&prev=/images%3Fq%3Db18b1%2Baebs%2Bsleeved%2Bblock%26gbv% 3D2%26hl%3Den

-ls vtec kit
-new type r oil pump
-new water pump
-84mm low compression piston and rings

[IndianStig]

boosting it i assume?? good luck man

[ducky1177]

good luck bro
im going with ls/vtec as soon as i come across some money also
:goodjob:

[bpoweredhatch]

yeah i just had a oosted gsr that made 471 on 19 psi. it messed up so now im going for more power hopefully alot more

[Dev]

nice starting point! glw the build man!

[bpoweredhatch]

thanks

[bpoweredhatch]

you all can also go to tennspeed.net and check out the other stuff he has for sale

[dabuilding]

yeah i just had a oosted gsr that made 471 on 19 psi. it messed up so now im going for more power hopefully alot more
and u want more :eek: i would be more than satisfied with half of that gl man hope u can find some traction somewhere

[-S Double C-]

i thought you was buying hondalovers b16 swap?

[dexsohcvtec]

nice lookin for big power

[bpoweredhatch]

i thought you was buying hondalovers b16 swap?im still thinking about gettin his b16 bottom end.i was gonna do some trading with my head but i would rather keep my head.but than again everyone keep naggin sayin something has to be wrong for someone to take apart a good motor. but he is still gonna get a answer from me soonlet him know

[-S Double C-]

im still thinking about gettin his b16 bottom end.i was gonna do some trading with my head but i would rather keep my head.but than again everyone keep naggin sayin something has to be wrong for someone to take apart a good motor. but he is still gonna get a answer from me soonlet him know

nothing is wrong with it he just got a little mad cause his turbo was too big and didnt spool till 6k and my d series with 280whp outran his 400whp b16. But its all good now. I pointed him in the right direction and its gonna be a beast soon.

its also under warranty by mainstream so your covered! :)

[bpoweredhatch]

how much for his head and bottom end cash?

[-S Double C-]

ask him im not the owner lol

[bpoweredhatch]

i thought he was always with you lol. but when my phone charge up i ll check and see how much he want

[-S Double C-]

nah i see him at work almost everday like once a week if that out of work though...LOL!

[WTF?]

good luck its going to be a beast

[bpoweredhatch]

thanks i hope so

[-S Double C-]

let me know when you get it done and i got a lil d series you can play with at the track :)

[bpoweredhatch]

haha will do

[bpoweredhatch]

i need a ls vtec kit if anyone knows someone local

[0\s accord]

i vouch for his old gsr build that thing was a beast =]=] sucks that it broke wanted to see that thing on more boost

[bpoweredhatch]

this one is gonna have alot more b oost hoping to run at least 32 on high boost but im puttin the bottle on it sense i know its sleeved now

[SPOOLIN]

the bottle is REALLY not necessary...

[bpoweredhatch]

i know just wanna get about 650hp and be set for my daily

[SPOOLIN]

size the turbo right and you won't need nitris to do that!

[bpoweredhatch]

pics of the build....

[bpoweredhatch]

more

[dabuilding]

nice stuff man gl on the build :goodjob:

[bpoweredhatch]

pistons

[bpoweredhatch]

nice stuff man gl on the build :goodjob:thanks alot

[bpoweredhatch]

anybody need any acl bearing they sent me extra sets

[big mac]

what would the acl bearing fit? crank braring or rod barings? trade for the arp headstud and bolts?

[bpoweredhatch]

there for the rods^^^

[big mac]

Would you wanna trade?

[FasTech]

Goodluck on the build and I hope you reach your goal. Keep us upadated, man.

[big mac]

Lmk on bearings, 6788636927

[DC2NR]

Looks good. Can't wait to see what this thing puts down.

[4DrTeg]

looks nice man..oooo i like the shiny pistons

[silverDA]

how much you pay 4 the conversion kit 250?

[bpoweredhatch]

yeah 250 for the 84.5 one. i just texted you big mac

[0\s accord]

lol i was there when he got his shit lol was like x-mas to him

[bpoweredhatch]

^^^ lol all the dang ups and fedx trucks rollin up every two hours