then and now s13 pic

[hayes0658]

so here are some pics of my car when i first started this project...i only have pics after the swap and paint was done...oh yeah and before i moved to G.A i started a wire tuck on my s13..it took me about 2 days to do the body harness..and for anyone who hasn't seen a s13 body harness its long...it starts on the driver side of the car and wraps around the front for the headlight 2 fuse boxes and some other power plugs and goes back in on the passenger side of the car...im not complete done with the engine bay yet...i still need to pull the motor but this is what i have so far..the body harness now runs under my dash (so it went for like 14 foot long to 4 foot long) i now have 1 fuse box mounted behinde glove box (car has 2 under the hood. 1 for the headlight motors and 1 for fans alt horn) im not done yet...but let me know what you think...and yes it was all solder and shrink wrapped...

http://i129.photobucket.com/albums/p234/hayes0658/s13/l_9b06216cab16ab758c029abdab787c99.jpg
http://i129.photobucket.com/albums/p234/hayes0658/s13/l_a42ca4a5066cfb8482903e6d1a466fe4.jpg
http://i129.photobucket.com/albums/p234/hayes0658/s13/l_0ba824020142a33637a30142ad309770.jpg
http://i129.photobucket.com/albums/p234/hayes0658/s13/l_429a11fe335ca46d945d45d4a8652339.jpg
http://i129.photobucket.com/albums/p234/hayes0658/s13/l_9bd65ebddc265f38037dcdf02cf64674.jpg
http://i129.photobucket.com/albums/p234/hayes0658/s13/IMG_3215.jpg
http://i129.photobucket.com/albums/p234/hayes0658/s13/010.jpg
http://i129.photobucket.com/albums/p234/hayes0658/s13/011.jpg
http://i129.photobucket.com/albums/p234/hayes0658/s13/002.jpg
http://i129.photobucket.com/albums/p234/hayes0658/s13/IMG_3216.jpg

http://i129.photobucket.com/albums/p234/hayes0658/s13/IMG_3052.jpg
http://i129.photobucket.com/albums/p234/hayes0658/s13/IMG_3053.jpg
http://i129.photobucket.com/albums/p234/hayes0658/s13/IMG_3054-1.jpghttp://i129.photobucket.com/albums/p234/hayes0658/s13/IMG_3054-1.jpghttp://i129.photobucket.com/albums/p234/hayes0658/s13/IMG_3056-1.jpghttp://i129.photobucket.com/albums/p234/hayes0658/s13/IMG_3061-1.jpghttp://i129.photobucket.com/albums/p234/hayes0658/s13/IMG_3212-1.jpg

ill post some pic of the motor tmw... and when i find a place where i can pull the motor ill finish everything up and post somemore pic

A few motor pics

http://i129.photobucket.com/albums/p234/hayes0658/s13/750.jpg
http://i129.photobucket.com/albums/p234/hayes0658/s13/751.jpg

[Killswitch Performance]

Where did you learn or think of the placing for the fuse box? This is the EXACT location of where we put ours. And as far as I know, we are the only ones that do this work.

But looks good.

Tyler

[hayes0658]

thanks...its still a lil messy...i need to pull my dash out and clean it up a lil...but i was in a hurry to move to G.A..and i cut the glove box out a to much... i was a tech in raleigh nc for 5 years...working at a shop called tuner solutions..i did all the wiring swaps and turbo conversions for them

[DUBSf22c]

like her.. keep on progressing

[AnthonyF]

Good work man. Not a huge fan of that front end conversions but nice wire tuck. I REALLY hate dealing with that much wiring at my shop. Gives me a headache. lol

-Ant.

[JRJcrf150f]

nice man

[Brian*]

Looks, SO MUCH BETTER! I love it*

[You_Wish]

weak suace lol...


ill see you in a couple hours homie..

[bRiAnMcIvIcS]

Looks awesome.:goodjob:
I love s13 coupes.

[SixSquared]

Where did you learn or think of the placing for the fuse box? This is the EXACT location of where we put ours. And as far as I know, we are the only ones that do this work.

But looks good.

Tyler

fusebox in the glove compartment is a pretty standard spot to put it when doing wire tucks. I've also seen people run brake/clutch master cylinders under there, depending on the size of the box.

[WalkS]

Looks great man! That wiring would make me go crazy! Lol.

[hayes0658]

thanks...and the wiring wasnt to bad...i was just in a hurry to finish...i had a set date to move...and every time i went to work on it it rained...i had the car parked for about a month at my moms house in NC and decided to tear it apart at the last min....dumb on my part but i got it half way finished so its all good...