Fully BUILT h22 and h22 parts..

[Goinfasterthanu]

LAST TIME PEOPLE... I HAVE NO SPARE PARTS OTHER THAN WHATS LISTED...

STOP ASKING ME TO SELL IT FOR 1500$...Come on im not broke..Not hurting for money.. I have a sleeved built h22 NO WAY i would sell it for less than 2500$ for all of it..!! NO LESS I WONT PART OUT ANY OF IT!!!

Not to be a dick just tired of all the pm's and calls ......... for shit i dont have or " hey dog ill give you 400$ for the tranny " ect........




WILL TRADE FOR BIKE!!! Will trade for nice motor cycle..

Motivated seller..... 2500$!! Come get the car mounts and traction bar setup!!!Need this sold!!





HERES THE Block code and TRANNY code...for QD ... even though i have a pic of the work order on there from where it was built... Someone is bored..

block.. 1006858
tranny.. m2b4-1000197



As add says i have a built h22 for sale... It has the following

H22 block with GE sleeves
J.E. Pistons 9:1
Crower probillet rods
Crower 0/5mm oversized valves
Crower Springs and titainum retainers
Skunk 2 can gears
Pro drive billet oil pump
Crower turbo cams
Mirror port and polish
Greddy timming belt
Balanced and blue printed

Im shure iim forgetting some stuff......I have paperwork showing ALL work.. and tons of pics of the whole build..

http://i38.photobucket.com/albums/e140/Goinfasterthanu/motorhead.jpg
http://i38.photobucket.com/albums/e140/Goinfasterthanu/motorretainers.jpg
http://i38.photobucket.com/albums/e140/Goinfasterthanu/motor-1.jpg
http://i38.photobucket.com/albums/e140/Goinfasterthanu/motortimming.jpg
pics of some paperwork
http://i38.photobucket.com/albums/e140/Goinfasterthanu/motorpics.jpg
http://i38.photobucket.com/albums/e140/Goinfasterthanu/motorpics3.jpg
http://i38.photobucket.com/albums/e140/Goinfasterthanu/motorpics.jpg
Optional h22 tranny with kaaz lsd
http://i38.photobucket.com/albums/e140/Goinfasterthanu/trannylsd.jpg

3000 without tranny has noloigy wires and dizzy 3500 with

Msd and coil
http://i38.photobucket.com/albums/e140/Goinfasterthanu/msd.jpg

150$


Golden eagle intake manifold.... was cut to fit a h22 in a eg or ef... was done by fat cat racing and will not affect flow...
http://i38.photobucket.com/albums/e140/Goinfasterthanu/goldeneagle.jpg


404-579-5745

[Goinfasterthanu]

Or trade for jeep cherokee or grand cherokee + cash on my part if need be...

[Sir_Christopher]

would you trade for a stock rebuilt h22a that was blueprinted? plus some cash? or trade

[Goinfasterthanu]

no... i have no honda to put it in.. Done with them.. Went as far as one can go with a civic.. Thanks though.... ONLY trades are for a cherokee... grand cherokee... or a crv... plus cash on my part if need be...

[Goinfasterthanu]

Oh also motor has way less than 10 k on it

[Sir_Christopher]

dang, if i had the money i would buy it, i wanna boot my ef hatch haha.

ill give you a grand and some hopes and dreams haha

[Goinfasterthanu]

lol..... reps for hopes and dreams!!!

[Sir_Christopher]

thanks man, ill see what i can do after i get my h22 in my car. i wanna go fast on the track

[Goinfasterthanu]

Well the 700+ whp this motor can make will do it.....

[Sir_Christopher]

what would you take for the starter and alternater and and wires??

[Sir_Christopher]

gah damn please trade me dude, you can always sell the other h22 haha, i needs a track car and ive already spent 4 grand just getting it preped and being able to get put in the car lol

[Goinfasterthanu]

what would you take for the starter and alternater and and wires??

No can do sorry.....

[Goinfasterthanu]

gah damn please trade me dude, you can always sell the other h22 haha, i needs a track car and ive already spent 4 grand just getting it preped and being able to get put in the car lol


Cant sorry... I dont want to have to sell a stock motor.....Sorry....I know your pain belive me..

[bpoweredhatch]

looks good and great price

[D3UC3S]

do you happen to have a usdm oil pan?

[-S Double C-]

bump for a good guy and seller

[Goinfasterthanu]

bump for a good guy and seller


Thanks ..... reps....

[Goinfasterthanu]

do you happen to have a usdm oil pan?

Nope sorry...

[punkr6]

TTT

[Goinfasterthanu]

TTT

reps...

[MoonScryer]

Up and up.

[D3UC3S]

thx anyways! Super clean...bump for the big block!!1!!

[SpooL'DGsR]

g/l on sale ! great parts

[Sir_Christopher]

bump

[ACCORDPRIDE]

pm'd

[Goinfasterthanu]

back at ya

[StreetHazard]

ill give you my G/F for the weekend for it, but I have to warn you shes angry and talks back alot

[Goinfasterthanu]

humm... what does she look like? .... hahaha... reps for good laugh

[NEMO]

bump for looking

[Starrfire]

bump for some really good stuff.

[Sir_Christopher]

help me sell my h22 and ill buy yours :]

[Goinfasterthanu]

bump

[B_Hoov]

bump for my old set-up. will vouch for motor, fully built is an understatement!

[tinkolby_25]

bump for looking

[4thgen22]

would you trade for a stock rebuilt h22a that was blueprinted? plus some cash? or trade


hey how much do you want for that h22, i have one but, when i rebuilt it, the pistons are sitting out the deck, just an 8th of an inch

[lcortes32]

NICE DEAL BUMP FOR YOU

[mirz833]

would you part out the intake manifold pm price if u interested

[Goinfasterthanu]

would you part out the intake manifold pm price if u interested

pm sent

[Sir_Christopher]

hey how much do you want for that h22, i have one but, when i rebuilt it, the pistons are sitting out the deck, just an 8th of an inch

im not sure yet, throw me a price, cause ive sspent a lot but i know i wont get what i spent on so just shoot

[Goinfasterthanu]

I can bring any of this to the V meet tonight....

[9ussy]

Good stuff for sale man.. Bump for u..

[Goinfasterthanu]

bump

[Goinfasterthanu]

I cant belive i still have all this stuff...bump

[ACCORDPRIDE]

still waiting for my pm bak from that guy

[civic gsr]

by any chance u dont got a spare h22 harness ???? pm me if u got one need it tanxz

[Goinfasterthanu]

Nope i dont....sorry

[Goinfasterthanu]

still waiting for my pm bak from that guy

Dont know what you need to know... You have seen over 10 pics , seen it in person.I sent you EVERY number on it.. Its been on 2 built h22s making over 650whp... But cool....just let me know.... I really want to sell it with the motor anyway...

No being a dick ....just laying it out there...

[Goinfasterthanu]

bump

[StreetHazard]

I wish I had this

[Goinfasterthanu]

Bump... Turbo SOLD.. Thanks Accordpride!!

[Jenson]

You wouldnt by chance have a stock H22 intake manifold and rail setup? Free bump for great parts. Wish I had the cash for the GE intake.

[Goinfasterthanu]

NO stock parts... other than whats on motor...IE... atl starter ect...

[Sir_Christopher]

Bump, i still wish you would trade me haha. but its all good, hope you get it sold man

[punkr6]

TTT

[Goinfasterthanu]

bump

[justahatch09]

i sent pm about manifold still no reply... i want it...

[Goinfasterthanu]

Pm back at ya... or just call me 404-579-5745

[Goinfasterthanu]

bump

[broncos97]

would you trade for a 6'5" tall 5' wide cornwell tool box? pics available if you want them?

[Goinfasterthanu]

No thanks.... Got a crv now so just looking for cash really....

[B_Hoov]

bump for jeremy! i'll hit you up this week man, might have a buyer for ya!

[tinkolby_25]

pm'd

[Goinfasterthanu]

back at ya

[punkr6]

Up

[Roseberry]

Bump to a good seller and friend....but please don't sell my tranny. Been tryin to call ya for weeks. When the motors is pulled I'll come grab the tranny. Thanks man, Hit me up...

[Goinfasterthanu]

Not your tranny...... anyother problems keep it to pms...

[broncos97]

bump, great parts

[justahatch09]

i called you several times and left you a voicemail about the golden eagle intake and throttle body... pm me if you still have them thanks

[Goinfasterthanu]

just called you......

[southside]

damn wish I had the cash I know whos this was and what it was going in and I would do the exact same.4dr FTMFW

[Goinfasterthanu]

Yea its a SICK ass setup....

[Goinfasterthanu]

bump

[Sir_Christopher]

bump, someone get this, i wish i could.

[broncos97]

someone buy my tool box so i can buy this motor lol. http://s645.photobucket.com/albums/uu178/bronco97/?albumview=slideshow&newest=1

[Goinfasterthanu]

Someone buy it before i put it in a CL.....

[punkr6]

Up

[broncos97]

bump, great parts

[Goinfasterthanu]

Will trade for bike .. see 1st page...

[Goinfasterthanu]

bump

[Goinfasterthanu]

Need bike dont be shy......its in a 4 door ef... come get the whole thing!!! Just need bike worth close to what im asking....

[NoWAyItZTOMmY]

wouldnt mind having that ge mani

[Goinfasterthanu]

Still got it.... ill sell just the mani... 300obo....!!

[Chong80]

bump nice glws

[Goinfasterthanu]

Bump ... need another bike... get this before i post it on craigs list

[Goinfasterthanu]

bump

[Sir_Christopher]

BUMP FOR A BAD ASSSSS SETUP

[Goinfasterthanu]

Thanks guys... i know someone has a bike they wanna trade to make a civic as fast as a bike...

[Goinfasterthanu]

bump

[Goinfasterthanu]

Motor is in a 89 4 door civic... Get it all mounts and all for 2800!!! Need it gone tranny and all!!!

[plasto1]

bump

[Goinfasterthanu]

bump again.... trades offers?

[-S Double C-]

lol and when i had 3k cash you wouldnt except it

[ejchris]

glws/t.....

[Goinfasterthanu]

lol and when i had 3k cash you wouldnt except it


You never offered me 3 k.... lol ... If you dont want to buy keep it to your SELF!

[Goinfasterthanu]

Motivated seller..... 2500$!! Come get the car mounts and traction bar setup!!!Need this sold!!

[-S Double C-]

You never offered me 3 k.... lol ... If you dont want to buy keep it to your SELF!

yes hell i did you said no but oh well glws :rolleyes:

[Goinfasterthanu]

Do care enough to argue

[Goinfasterthanu]

bump .... going to deliver it tomorrow so if anyone wants it you better jump on it...

[ejchris]

trades on da manifold?? pm me

[Goinfasterthanu]

no thanks ... unless you have a skunk 2 mani for a b18b1

[ballt85]

u got headers

[Goinfasterthanu]

lol..... i dont even know how to anwser that...

[cowartbrian]

pm'd

[Goinfasterthanu]

back at ya

[99' LuDe]

very nice glws

[EmminoDaGreat]

Have any shifter cables?

[95LxCD5]

great deal man. bump for DOHC power. glws :boobies: :boobies: :boobies: :camera: :bump: :goodjob:

[Sir_Christopher]

alright dude, ill trade you my motor plust my 50" plasma haha, you just have to help me put the motor in my car haha

[Tech5]

ttttt

[Goinfasterthanu]

alright dude, ill trade you my motor plust my 50" plasma haha, you just have to help me put the motor in my car haha


lol...got a plasma.... Well damn i dont think i will ever find a trade for this motor....

[Sir_Christopher]

lol...got a plasma.... Well damn i dont think i will ever find a trade for this motor....


well i realy want it, but the resession blows and i cant get the money for it :[

[Goinfasterthanu]

BUMP

[bigdare23]

Hey you wouldn't happen to have an spare set of stock obd1 h22 injectors?

[Goinfasterthanu]

lol... what am i a parts yard? ... I HAVE NO EXTRA PARTS!!

[h22 jones]

so what is the price for just the motor and do you still have the golden eagle manifold if so how much?

[Goinfasterthanu]

Just buy it all for 2500$

[-S Double C-]

trade for a running delsol? auto, and pretty clean

[justahatch09]

does the manifold come with throttle body?

[h22 jones]

when you say what do you still have sorry dont feel like reading six pages of post so what do i get for 2500

[Goinfasterthanu]

trade for a running delsol? auto, and pretty clean

Possibly.... pm me pics...

[Goinfasterthanu]

when you say what do you still have sorry dont feel like reading six pages of post so what do i get for 2500


No need to....just look at page one.... You get it all except the throttle body , but you get a ef , traction barsetup , mounts , tranny with kaaz lsd and of course motor.....

[h22 jones]

intake come with it?

[Supraboy87T]

Nice setup. Would love to get this motor for my Ej1 but I just bought a supra. LOL. Bump for you.

[Goinfasterthanu]

intake come with it?

Yes

[foolish]

do you have an exta h22 down tube

[foolish]

will you just sell the swap mounts, if so how much and, will they fit a 1992 eg dx

[Goinfasterthanu]

i would but they are holding the motor right now..lol

[Turbodude06]

I didn't see anywere if u were willing to part this out. But just let me know if u want to part with the trans and how much?????? Free Bump.....

[Goinfasterthanu]

just get it all for 2500$ .... i cant part out a build like this...

[Turbodude06]

just get it all for 2500$ .... i cant part out a build like this...


lol.... Well let me know if u decide to.... :goodjob:

[95turd]

bump for good seller

[Barefoot]

by any chance do u have a set of manual axles

[Goinfasterthanu]

by any chance do u have a set of manual axles

LAST TIME PEOPLE... I HAVE NO SPARE PARTS OTHER THAN WHATS LISTED...

STOP ASKING ME TO SELL IT FOR 1500$...Come on im not broke..Not hurting for money.. I have a sleeved built h22 NO WAY i would sell it for less than 2500$ for all of it..!! NO LESS I WONT PART OUT ANY OF IT!!!

Not to be a dick just tired of all the pm's and calls ......... for shit i dont have or " hey dog ill give you 400$ for the tranny " ect........

[Goinfasterthanu]

To all the cool people ... thanks for the bumps...rep where i can

[Barefoot]

LAST TIME PEOPLE... I HAVE NO SPARE PARTS OTHER THAN WHATS LISTED...

STOP ASKING ME TO SELL IT FOR 1500$...Come on im not broke..Not hurting for money.. I have a sleeved built h22 NO WAY i would sell it for less than 2500$ for all of it..!! NO LESS I WONT PART OUT ANY OF IT!!!

Not to be a dick just tired of all the pm's and calls ......... for shit i dont have or " hey dog ill give you 400$ for the tranny " ect........calm your happy ass the fuck down.

[Goinfasterthanu]

Did you read any of the posts in here? No you didnt or you would have seen the other 10 people asking me for parts... And i told the the same... Does my add say h22 axles? Nope ...... So you calm the fuck down....

[Barefoot]

Did you read any of the posts in here? No you didnt or you would have seen the other 10 people asking me for parts... And i told the the same... Does my add say h22 axles? Nope ...... So you calm the fuck down....u can read 7 pages worth of bump if u like. im looking for a yes or no circle one. not u bitch about some shit how nobody wants to pay 2500 for your crap. YES or NO no butt hurt stories please.

[justahatch09]

free bump for putting up with people that cant read

[Goinfasterthanu]

u can read 7 pages worth of bump if u like. im looking for a yes or no circle one. not u bitch about some shit how nobody wants to pay 2500 for your crap. YES or NO no butt hurt stories please.


LOL....Hater number 1..... Take your ethug ass somewhere...

Little hint ... Next your looking for h22 axles... find a add that says " h22 axles for sale" ....

Now to say a motor build like this is " CRAP " ... Is like saying the 700+ whp it can make is " nothing " ....

So go hate in another thread because you cant buy my motor and your mad...

[Goinfasterthanu]

by chance do you have a... just kiddin'... bump for the night crew...

reps for you....

[Goinfasterthanu]

free bump for putting up with people that cant read

i turn thee from red to green....lol reps for you because you can read...