What have you done to your EF today?

[bigdare23]

(Bite'n from H-T)

Here's a chance to keep everyone in the Squad updated with your day-to-day progress. So if you washed your car... post up. If you changed your oil today... post up. If you installed HIDs... post up. If you picked up some hookers in your brown wagovan (LOL) post up.


You get the point :goodjob:

[rbwdriven]

I drove mine to work.

Ordered a silencer tip for the civic si, since it is so loud it will wake up the dead.

[Revmaynard]

Mine sat in the driveway, omw out to pick up a new timing belt/water pump and all that jazz.

[Bus Driver J]

Which one??
Black, looked at it and cried as I walked by it in the driveway (dont ask)
Silver, ignored it.
White, didnt think about it until now
CRX, getting over nightmares about the wiring harness. Ill have some pics of it up later.

[Humphrizzle]

i cleaned a lot of crap out of the inside.

[KevinT707]

On Sat Darryl came through, picked up DA caliper brackets for me from Pull-A-Part, drove to my house, & gave me a hand on doing my Fast-Brakes front big brake upgrade. Props to BigDare forsure for helping me out so that I could make it to Import Alliance. Brakes faster than a Veyron now :D

Brake upgrade consisted of: 91' Civic EX Master Cylinder, 11" VW Corrado Rotors, Fast-Brakes conversion kit, Reman DA calipers, and SS brake lines.

[rbwdriven]

got a write up for the upgrade?

[Athens_Red_Rexin]

Drove mine to work, got a new brake booster and master cylinder ready to go on tomorrow. Pissed about the mint crx door panels that I was bidding on, on ebay, and of course I lost them. They sold for $61. DAMN IT!!!

[matthewAPM]

did a big smokey burnout through 1-2-3. Then went e-brake sliding. yeehaw!

[frankXVX]

today i fixed my reverse ligths and turning signals a few trips to auto zone but it got done,im way late but last week i changed the oil,painted my green drums black,si seats all the way around and rear cargo cover with speaker mounts.

[southside]

shit really just looked at it while I was hoping in the coupe......

[toonz]

Washed my hatch

[JDMJAYDC2]

eh installed my h.i.d kit and put on my ef squad sticker

[revized_DX]

motor mounts! and i drove it and its doing fine!

[smokeyj]

PICK UP SOME SPRINGS AND FOUND AN RT TRANNY TO PURCHASE SAT

[Humphrizzle]

scrubbed the 6 months worth of pollen off the car.

now for a vacuum. and to find seats and rails that actually fit the car.

i have random non civic seats in it right now.

each only have like 1 bolt in the seat. they look like my old 92 ford escort seats.

[sakasaku]

got almost all the air outta the cooleant system and got it running right just need to take off the TB and clean the plate keeps getting stuck open and wont go back dow to Idle could also be the spring to dont know yet :)

[Humphrizzle]

mine wont start.. i think the battery may be shot.

[southside]

HEHE well I did timing last week,Got a B&M shifter,put head on installed Arps and Went to Dover to get my rebuilt head.Then I put it on and installed cams now I need valve cover groomets,and bolts.A Main relay and install B&M shifter.

[slow_hatch]

Nothing :( Wish I had extra $$$ :cry:

[southside]

Also got a Fresh ASS BLACK cargo cover with mounts trying to get this rear DC strut from my friend but hes being a little bitch right now.

[00CelicaGT]

drove mine to work today for the first time since i put my celica back on the road.

this morning for the first time i realized how LOUD & OBNOXIOUS my car really is.:bump: :taun:

[Athens_Red_Rexin]

Filled mine up this morning and I got 38.7 mpgs. God I love my CRX!!! Puttin the new brake booster and master cylinder on today!

[Papa_Smurf]

drove mine to work today for the first time since i put my celica back on the road.

this morning for the first time i realized how LOUD & OBNOXIOUS my car really is.:bump: :taun:

wait... you JUST figured out how retarded that exhaust is?

wow ant...

[KevinT707]

I put a random battery tie down from a random car, on. And put a bolt & nut in where the shift linkage attaches to the shifter thing on the tranny. It fell out a few weeks ago on an on ramp so I jacked my car up, found it & put it back in (on the side of the road).


Filled mine up this morning and I got 38.7 mpgs. God I love my CRX!!! Puttin the new brake booster and master cylinder on today!
WTF, how do you manage to get 38 MPGs !?! That underpowered D-Series probably contributes to at least 95% of it I bet ;)


wait... you JUST figured out how retarded that exhaust is?

wow ant...
True, that exhaust attracts to much negative attention. Sorry for hating & I have nothing against you Ant but I don't care how JDM that exhaust is .. it sucks!

[revized_DX]

changed tranny oil and if it doesnt rain its getting a quick rinse and then my usual 80-90 up 985

[cwhiteboy]

Protected my car from the rain by pullin it in the garage.

[southside]

hopefully I can get some work done today like installing stuff.And seeing how this new project turns out.

[sakasaku]

Went out opened hood , and relized i need to get some info on the CKP and sat at the comp and thunder cracks and i look outside and its pooring so i ran out and closed up and here i am now :/ maybe in a few

[frankXVX]

today im ordering some black vinyl for my SI visors that i got from you_wish
and getting a vinyl repair kit to give the interior a few touch ups here and there
and new headliner along with some trunkliner:ninja: and i was about to clean it and wash it when it started raining :(

[Papa_Smurf]

moved her from one parking lot to another :rolleyes:

[green91]

Cranked mine for the first time in a few weeks, drove it to down. Spun tires in low boost.

[smokeyj]

BOUGHT FLARES,TAILLIGHT AND TRIM O AND OF COURSE PAID FOR MY TRANNY

[bigdare23]

I used my CRX as a uhaul truck and moved my crap.

[sakasaku]

were to?

[bigdare23]

just out of my apartment to storage. I'm living in athens for a few weeks.

[SL65AMG]

i put on new front brake pads and bled the brakes all around... i drove it to and from work and other places of interest and i raced( if you want to call it that- more like accelerating in a playful manner) my friends Ls-vtec coupe..... and i kept up surprisingly well (he smoked me but i wasnt far behind).... (either he wasnt trying or is a shitty driver)

[rbwdriven]

filled up with Gas this morning. Got 38.61 mpg last week.

looked at the civic this morning as I let the dog out for a pee.

[revized_DX]

axle blew out on me its at DJMERCK's (fr. 240atlanta) house going under the knife tomorrow evening after work! and we are discussing some "blow off plans" for the engine i got out back!

[revized_DX]

removed my tranny tonight and found that the axle is all good but i am putting dx tranny back in for the time being. i did get the chipped pm6 a few days ago and made a WORLD OF DIFFERENCE!!! very happy with it! tranny should be done no later than thursday and im ready to get this biatch back on the blacktop....


hell! i do something to my shit everyday! no matter what~! cleaning to major shit lol...

[revized_DX]

told yall its an everyday thing! got the dx tranny back in the hatch tonight and will have it back on the road rollin by noon, that is if i can get my wore out ass up!

[frankXVX]

i sanded what i tougth was just a rust spot but then i found out that my baby had a hole/rust and the mofo who had it befor just put bondo on top of the rust =(
i love my EF

[sakasaku]

ill post a link on how to fix it!

[uproot]

Put up a new headliner:

Sunroof is at the top and my rear window is at the bottom
http://farm4.static.flickr.com/3365/3524854058_6205a46e94_o.jpg

[southside]

Sanded down bumper to smooth some of the nicks.And proble paint it later this week.Just need to get my main relay,and Dizzy and this thing should be on the rode.

[KevinT707]

Put up a new headliner:

Sunroof is at the top and my rear window is at the bottom
http://farm4.static.flickr.com/3365/3524854058_6205a46e94_o.jpg
:D Nice homie!

[frankXVX]

yeah uproot that LOOKS GREAT

[uproot]

Thanks y'all :D

Gettin cleaned up in case I have a chance to swing through some meets during the summer, plus you don't even want to know how it looked before :upchuck:

[BKgen®]

Put up a new headliner:

Sunroof is at the top and my rear window is at the bottom
http://farm4.static.flickr.com/3365/3524854058_6205a46e94_o.jpg

shit yeah! looks badass, Guy! :goodjob:

[uproot]

shit yeah! looks badass, Guy! :goodjob:

Thanks broskie!!! :D

[sakasaku]

Well i solder the CKP wire back on to the pin and put the dizzy back on still Woeing at Idle and i found a coolant leak were the hose comes out of the Heater core (prays its not the heater core) and it started running hot again
:no:

[southside]

Put front bumper back on now taking motor back out stripping all my shit out (interior) that is black and putting it in NEW!!! SHELL!!!.Also taking rear disc brakes and putting it on also front brakes pretty much stripping old shell of everything.

[Bus Driver J]

Scoured whats left of the interior (CRX) for a roll of electrical tape. Couldnt find it, LOL.

[blaknoize]

I drove mine to work... then 200miles to Portsmouth and back, then got gas and parked it

[BABY J]

Decided that I've been doing a lot of talking, and not so much doing (although I spend lots of money traveling and just seeing the world --- music (expensive) --- and other hobbies that I have. Today - I prepped the EF for tuning. Put the front wheels back on -- re-installed the Zeitronix wideband, changed the plugs / plug wires, and oil. Also ordered some seats for it.

[uproot]

What kind of seats BabyJ?

[green91]

I bought a EF replacement today. I guess i should unsubscribe from this thread now LOL.

[bigdare23]

details?!?


and...... gay





:D

[green91]

I bought a RHD 240sx coupe. Although i will be swapping the parts over to a LHD car.

[bigdare23]

why?

[green91]

Why did i get it.. or why am i swapping them over?

[bigdare23]

Both LOL

[sakasaku]

i was figured out why the hatch was woeing and why the throttle plate was sticking open i stared at the TP and Diaphragm and i open the throttle and watched it close it it and it was the Diaphragm. also woe was just and Adjusting of the idle screw:no: lol so the hatch is runn well will video tape it tomorrow

[bigdare23]

Yesterday I drove down to Columbus and took my jdm bumper and headlights off of my hatch.

[southside]

Yesterday I drove down to Columbus and took my jdm bumper and headlights off of my hatch.IF that front isnt sold by the end of the month I might get it trying to get honda-tech clean.:D

[SL65AMG]

Well I put a B&M Short Shifter in my car yesterday... i cant believe how much difference it makes.... its kinda cool really.....


lol

[sakasaku]

Well I put a B&M Short Shifter in my car yesterday... i cant believe how much difference it makes.... its kinda cool really.....


lol


Pics?

[sakasaku]

IF that front isnt sold by the end of the month I might get it trying to get honda-tech clean.:D

there,s no such thing lol..... pics of new shell?

[rbwdriven]

drove it to work.

[stevo_EF91]

rear windshield wiper delet. repainted the trim. and some new windshield washer nozzles on the hood

[southside]

there,s no such thing lol..... pics of new shell?Will not be showing any pics until the car is done.Dont want or need a build thread just want a Southside's Finished Whip thread:goodjob:Yesterday painted side moldings and wiped bay down for paint didnt realize I was spray flat instead of gloss.:( Owell it doesnt look bad so Owell.Doing suspension swap tomorrow need my rear disc.:blah: Yall will see soon enough:camera:

[SL65AMG]

Pics?

gimme a few minutes

all im gonna have is a pic of the results.....

[sakasaku]

newo Seato going to sew the small tear and clean it up and put it in yizeah
http://i268.photobucket.com/albums/jj20/sakasaku/4485_1167477670084_1322191099_30434.jpg

[bigdare23]

(from a few days ago)
I installed a new front bumper on my car

Today
I stuffed my car with a 91 Si bumper and CRX Si door panels. I sold the bumper and need to ship the panels.

[southside]

Last night after drinking patron got bored and start painting my engine bay.

[sakasaku]

http://www.facebook.com/video/video.php?v=1168021683684&ref=nf

[sakasaku]

Installed my Home made intake...


http://i268.photobucket.com/albums/jj20/sakasaku/4160_1168633978991_1322191099_30439.jpg

[JDMJAYDC2]

:ninja: Pulling my motor in 2 hours

[sakasaku]

sell me your head lol when my tax return comes in lol

[Black R]

I bought a RHD 240sx coupe. Although i will be swapping the parts over to a LHD car.


ahh.... THAT makes sense!

I wish I had thought to do that!

Instead I didn't even look twice at that car...! :/

[jfrolang]

I got it aligned and did some two-wheel burnouts

[Revmaynard]

Ricer. ^

[Black R]

a little late, but Saturday I bought another set of wheels for it - this time some gangster ass 2 piece old school ones...!

[JDMJAYDC2]

Ate ice cream at topspeed and took pics of my motor

[sakasaku]

Cleaned the Fuck outta of my hatch, need money for emissons and registration :(

[Revmaynard]

Drove it.

[You_Wish]

got it towed away :(

[88NaCivic]

Pushed it the back yard...

[JDMJAYDC2]

heading to commerce ga to pick up some goodies:ninja:

[stevo_EF91]

started it up just to let it run for a few seeing its on crutches right now

[Revmaynard]

Washed it for the first time since....I mean, in awhile. Also was my first time cleaning the Enkei's on there. lol

[slow_hatch]

Drove the blue hatch to work, drove home, fixed the rear motor mount, then vacuumed and cleaned the inside again. Gave my daughter a pack of cleaning wipes, and she cleaned everything lol. I walked past the white one and thought about it :(

[JDMJAYDC2]

cleaned out the storage unit and posted all my crap for sale

[sakasaku]

got it registered so i can drive it tomorrow

[southside]

cant get damn suspension off this hatch for some reason spindle dont wanna come out even with the fork.its getting on my nerves really

[sakasaku]

Threw a rod wrist pin let go

[southside]

Threw a rod wrist pin let godamn that was quick what were you doing?

[southside]

Ugh yesterday I took all connectors loose took front spindles off (integra Da).Trying to see if I should just take my rear suspension off the hatch.Or just go get my friends gsr rear disc.Motors coming out this week also Sohc FTW>b series.

[sakasaku]

Ugh yesterday I took all connectors loose took front spindles off (integra Da).Trying to see if I should just take my rear suspension off the hatch.Or just go get my friends gsr rear disc.Motors coming out this week also Sohc FTW<b series.


you had a typo

[blaknoize]

Bought some new Kuhmo's today :D and an alignment, washed it, then it RAINED and looked just as bad :( and I got backed into :(

So today was FULL of surprises

[JEY$JDM]

Cleaned it up a bit





Buy some parts soon......

[JEY$JDM]

...gots to get alternator! fuck.

[low mileage]

well i didnt do it today but i have added since my last time i posted on here a set of coil overs, jdm si-r wing, and the support bracket that mounts from the bolts that hold the seatbelts on to it in the hatch.

[bigdare23]

picked up some parts

[southside]

took motor out old hatch on sunday,shift linkage,Today took crossmember off new hatch so I could use the ziz wheel to cut the front mount off.Ugh cleaned up the bay as much as I could then cleared it.Tomorrow motor goes in and other jubaloop.

[BABY J]

Nothing

[BABY J]

Nothing

[BABY J]

Nothing

[southside]

^^^triple post FTL

[*EFilliated*]

took out all hoses, the wire harness, radiator, ac, getting it ready for a new motor dis weekend, tommorow axles and linkage

[Mad Mike]

Rolled it out of the garage and found a huge puddle of oil under it. That and the motor is getting louder so I'm going to start rebuilding my d15 and my y7. D15 just needs rings and then I'll run that until I can gather all the forged internals and stuff to put the y7 back together.

[Revmaynard]

Damn, on your built z6? That's a shame!

[Mad Mike]

yep it sucks but the next one will be better.

[jfrolang]

I'm pulling the interior out.

[JEY$JDM]

Finally replaced the alternator! LOL

[southside]

LOL painted my sidemoldings and windshield wipers.

[JEY$JDM]

Dude.. I need to paint my wiper arms fa'sho!

My car is running again.. so Im good for now!

[frankXVX]

^ MINE is also running again WOOT! i just need a new trotle control sensor
i also need to paint those things
OH yeah replaced trans fluid and some bad hoses
EDIT: SOUTHSIDE what type of paint did you use for the side moldings and wipers?

[*EFilliated*]

putting in the integra center console today. :bump:

[jfrolang]

http://i41.tinypic.com/2ekrceu.jpg

[BABY J]

^^ You put that car back together THIS INSTANT!!! Showoff.

What am I doing? Well --- hmmm ---- read this list: (driver number 95)

http://www.indyhp.com/streetcarshootout/registered.php


:ninja:

[Mad Mike]

Yesterday I started putting rings in my d15b7 block so I can use it until my z6 is done. Got halfway done and my crappy drill battery died so I'll finish it tonight and probably pull the z6 out this coming up weekend. Should be interesting d15b7 all stock internals, z6 head and intake running 10psi. I don't care if it will last.

[green91]

It will last just fine, i boosted my 160k+ d15b2 at 11-12psi for probably 6-7 mos, beating the heck out of it all the time. I finally took it out because it was using so much oil. Turns out the oil control rings were seized, i could have re-ringed it and thrown it back in.

[Mad Mike]

I hope it lasts longer than my stock z6. only drove it 5 times over 3 weeks and it failed.

Does anyone know if the z6 oil pan will work on the d15b7? The b7 oil pan is dented from where it fell off the engine hoist. plus my z6 pan already has the oil drain on it for the turbo.

thanks

[Ed]

i am prob gonna go clean it, the outside, interior is pretty clean right now, bleed the brakes, and adjust the clutch today.

then get it tagged this week :P

[green91]

I recall the b2 oil pan not fitting the z6 because the oil baffes were in different locations and hit the pickup, but i never tried the z6 pan on the b2

[Ed]

^http://www.honda-tech.com/showthread.php?p=10261709

i was trying to find out if it fit or not cause i am trying to sell my old b2 oil pan... but it seems like it doesnt.

[southside]

i am prob gonna go clean it, the outside, interior is pretty clean right now, bleed the brakes, and adjust the clutch today.

then get it tagged this week :PIm guessing the dizzy workd:D

[Mad Mike]

^http://www.honda-tech.com/showthread.php?p=10261709

i was trying to find out if it fit or not cause i am trying to sell my old b2 oil pan... but it seems like it doesnt.

yea i got to do some research on it tonight. I'm wanting to put a d16Z6 oil pan on the d15B7

[Ed]

Im guessing the dizzy workd:D

yeah. it cranks. i was stoked when it first cranked up. check out my "build" thread, if you wish to call it that.


yea i got to do some research on it tonight. I'm wanting to put a d16Z6 oil pan on the d15B7

i got a d15b2 oil pan, if all you want is functionality, i think it would fit.

let me know if you want it.

[Mad Mike]

thanks but i have a few oil pans its just the z6 one has the oil drain for my turbo already on it.

[BABY J]

^^ You put that car back together THIS INSTANT!!! Showoff.

What am I doing? Well --- hmmm ---- read this list: (driver number 95)

http://www.indyhp.com/streetcarshootout/registered.php


:ninja:

I didn't win the NA/4 class but yall bitches got HELL on your hands w/ the non-vtec powa - I'm gonna enjoy what happens next. :crazy: And that's WITH an LS tranny (which will be remedied in a week). Game on.:ninja:

I got taken out by a h2b EG hatch w/ unknown mods, but not before personally eliminating:

1) gutted DC2 2 door / cammed(?) / B18C / bolt-ons - LSD (plus more)

2) modded rx8 (RWD FTL - LOL)

3) GSR swapped CRX w/ unknown mods

This was w/ full weight and the bags from my trip, and on street tires. Even w/ that said this car is def more at home from the roll - not the dig. I'm coming back in a week and I'm coming to hunt - get cha shit dialed in.

[JEY$JDM]

Changed oil..

[VickNotic]

On Sat Darryl came through, picked up DA caliper brackets for me from Pull-A-Part, drove to my house, & gave me a hand on doing my Fast-Brakes front big brake upgrade. Props to BigDare forsure for helping me out so that I could make it to Import Alliance. Brakes faster than a Veyron now :D

Brake upgrade consisted of: 91' Civic EX Master Cylinder, 11" VW Corrado Rotors, Fast-Brakes conversion kit, Reman DA calipers, and SS brake lines.


yeah you thank all of them, but no thanks for the man who finished the shieT for you huh... wata moFO!!

[southside]

installed clutch cable,speed sensor and other little shit fuel lines misc. stuff.Found out I gotta beat the subframe more because my alternator was touchn so I grinded it down now it clears but just to be safe going to dent it in some more.

[BABY J]

When is IA? I am heading to St Louis on Sat morning for a week - I didn't plan on going but depending on when it is I can stop through on my way back to ATL. Oh - and to keep things on subject - I ordered some 404s today for the Fagovan and some "other shit" :)

[Humphrizzle]

cleaning it.. every day i have time.. waiting to be able to afford another transmission. mine has hole in it.

sadness.

[JEY$JDM]

Fixed my exhaust from hitting dead animal... yuck

Everything good teh go now!

[Black R]

i got a new exhaust welded up thanks to mainstream. :)

bosozuko styleeee boi!

[JEY$JDM]

2mrw... I get Ksport LCA's and rear camber kit! Yessssss

[southside]

Went to Pull a part and pulled a dash harness for 2hours.

[The Yousef]

did a full MKV GTI swap today...

worth it.

[Mad Mike]

I put mine up for sale today. Ready to move o to a new project.:ninja:

[Sir_Christopher]

:cheers: :cheers: :cheers: :cheers: :yes: :camera: :camera: :goodjob:
http://i282.photobucket.com/albums/kk270/Ef_ftw73/h22swap.jpg

[JEY$JDM]

LCA's and rear camber kit... 2mrw

I would today, but have to work tonight, so I has to get some sleep!

[Sir_Christopher]

looked for suspension... anyone? humm, i could use it

[Revmaynard]

I'm probably going to do some ''body work'' tomorrow. lol

[Humphrizzle]

I neeeed a fender and bumper filler.. then I finish cleaning interior and then sanding for bondo

[JEY$JDM]

Off work... About to go put sum Ksport under teh hatch!

[southside]

:cheers: :cheers: :cheers: :cheers: :yes: :camera: :camera: :goodjob:
http://i282.photobucket.com/albums/kk270/Ef_ftw73/h22swap.jpgdammit those bitches started without me and my brother told you about that tranny right?

[JEY$JDM]

Got my LCA's on... They look good!

[JEY$JDM]

Got and put on a red tail light mid section off an Si/DX!!!! Looks way better than the black mid peice.
Also, I repainted my wiper arms black!!!!

[*EFilliated*]

yesteday i put an 89 crx si cluster in my 91 ef. took me like 1hour and a half. looks nice. :goodjob:

[Terror]

Put a B16A2 in that bish!!
:D :D :D :D :D

[southside]

put back mount in and shift linkage doing engine harness today.Also messed up my driver side moulding because I left door open when I was pushing into the garage and got a dent in it now.SHIT!

[JEY$JDM]

Put a Personal steering wheel... OEM mud guards, and new starter. Oil changed again.. Si front seats.. And I think thats it...?

[ATLem1]

put my a/c compressor back in... just need to get a vac and charge:cheers:

[southside]

Well hooked up everything and shit tried to start the beast and didnt wanna start for me.Havent checked to see if its got spark but it has fuel.And some dumb fuck did the wire tuck wrong and check engine light comes on when I turn on head lights.

[Ed]

I drove it today...

and made it to work.

On a serious note, latest additions have been right side mirror, DA shift knob and steering wheel.

I iz broke now. No monies.

[BABY J]

Well hooked up everything and shit tried to start the beast and didnt wanna start for me.Havent checked to see if its got spark but it has fuel.And some dumb fuck did the wire tuck wrong and check engine light comes on when I turn on head lights.

Ricer.

[JEY$JDM]

DOMO sticker! hahahaha

[seph]

removed a/c (didn't work and will help the car run cooler)
installed new radiator/timing belt/water pump/thermostat/tensioner
washed it
scrubbed on the interior but still need new seats/carpet :(
scraped off all the bullshit stickers from previous owner

It no longer runs hot so mission accomplished!

[Cato ED-6]

I'm severely trying to fix my problem with my hatch....

[jhadleyh]

sent it to the scrap yard and sold the other one

[southside]

Since nobody is really serious about the shell took rear disc.Bout to strip it if no one gets it by the end of the month.EF hatch PARTOUT coming soon.