PDA

View Full Version : 2.2 Ecotec L61 motor



Gutling
04-28-2009, 09:53 AM
A complete 2.2 ecotec out of a 2005 Cavalier. Less than 30k miles, vehicle was destroyed by a fire with no damage to the engine. All accessories (A/c Compressor, alternator, power steering pump), starter, intake and exhaust manifolds, throttle body, all sensors and plugs, fuel rail and injectors, flex plate, everything minus the transmission (was hooked to a automatic). It is in above excellent shape, was going to use it for a project engine swap but I am going a different route.

$500
[email protected]
I can take more pics if needed, all I did was pull of the manifolds and valve cover to clean and check it out when I got the engine, its fully assembled now.

http://img.photobucket.com/albums/v401/Gutling/100_0561.jpg
http://img.photobucket.com/albums/v401/Gutling/100_0574.jpg
http://img.photobucket.com/albums/v401/Gutling/100_0576.jpg
http://img.photobucket.com/albums/v401/Gutling/100_0577.jpg
http://img.photobucket.com/albums/v401/Gutling/100_0578.jpg

Bigt8aford
05-01-2009, 10:45 AM
i know these are good strong engines
-glws

Gutling
05-01-2009, 04:13 PM
Thanks. They are real popular to swap into different things as well, fieros and older cav/sunfires. Every sensor has the plug and a few inches of wire too, perfect for megasquirt or another standalone.

Scotsman
05-01-2009, 07:07 PM
same motor i have in my Vue i think

99GAGT
05-09-2009, 03:55 PM
Wish I had the finances... I could really use the block, and some other parts for my Cobalt build.

Gutling
05-10-2009, 07:19 AM
Sold, thanks for the replies it was picked up yesterday!

Scotsman
05-10-2009, 07:54 AM
SOLD :locked: