View Full Version : RB25det 240sx sway bar issue
RB25DET240sx
04-27-2009, 05:12 AM
Anyone know how to space out the sway bar from the oil pan without beating something up? or using so many spacers to the point only one bolt will go in. Syko performance from what i can tell only has a kit for the skyline crossmember and I used the stock S13 one. Any knowledge on the subject would be great. Thanks
Cool Cat Racing
04-27-2009, 07:28 AM
You either have to space the bar down or you can cut into the bar to help it clear.
speedminded
04-27-2009, 08:50 AM
Do it right and have a stock oil pan modified...or a custom one made.
Or you can always add a spacer to the engine mounts too if there is enough hood clearance. Depends how much is needed for the sway bar but the point of engine swaps is getting the center of gravity as low as possible!
jdm eg99
04-27-2009, 08:51 AM
picture ?
speedminded
04-27-2009, 09:04 AM
Do it right and have a stock oil pan modified...or a custom one made.Cylinder through the oil pan wha what? ;)
http://www.innerauto.com/images/partImages/oil_pan1.jpg
Kaiser
04-27-2009, 05:21 PM
Cylinder through the oil pan wha what? ;)
http://www.innerauto.com/images/partImages/oil_pan1.jpg
Lol, that looks sortof like a 26 front-sump pan without the baffles of a 26. Maybe a 25 pan from a GTS-4 or something?
Cool Cat Racing
04-27-2009, 05:29 PM
Looks like a iX pan. Done properly you can space the bar down with no issues.
RB25DET240sx
04-27-2009, 09:37 PM
I have already spaced it down so it doesnt hit but im not able to get the nut on for the stud side of the brackets
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.