Rotary Call out!

[gottraction?]

brought back from the dead! only had one rotary run! I still have a very midly modded 1st gen fb 13b! looking for other 12a's or 13bs! would even run a stock t2! Just like to see where im at before i go mod crazy! If i dont get any triangle replies i will even run a few other cars that are a close match! LMK

[On_Her_Face]

Flying Doritos FTW.

[ItsBlack]

Flying Doritos FTW.

bwahahaha! I never heard that term before.. but thats fuckin hilarious!

[gottraction?]

lol anyone! where are all of the spinning Triangles???!

[HillClimbGuy]

wow this is going to get bad

but just to let you know a stock 1 gen gsl-se which you seem to have
may beat a na 2nd gen depending on driver but the turbo 7 will have to play catch up if it is a s4 but it will catch you an a s5 turbo 2nd gen will leave you all day but this all depends on the driver tho

glad to see a fellow 7 on the streets tho :D

[gottraction?]

o i know that. Im not saying its beyond fast. i have owned many t2s s4,s5. They are faster. But i think i could hang with a BONE STOCK one almost as i sit at the moment and i can tell this na pulls well for the mods done to it. Just want to see where im at thats all! Hillclimb do you have a midly modded s5?

[blackshine007]

Its actually going to turn out being a slow run lol. I have a 1st gen 13b na that is VERY close to stock. Im looking to just do a few highway 40- up pulls with another stock-mildy moded 12a or 13b na! Interested in trying a stock t2 if one is around. I want to do this before i take off my factory exhaust to see where im at power wise at the moment cause it seems like it pulls good to have just a filter! Hit me up!
Not to be funny or anything, but word on the interwebz is that SDR is having a 15 second day so if you wanna take your grudges out on someone, it would be a good spot to meet up with everyone. I'm just putting it out there....

[HillClimbGuy]

[QUOTE=blackshine007]Not to be funny or anything, but word on the interwebz is that SDR is having a 15 second day so if you wanna take your grudges out on someone, it would be a good spot to meet up with everyone. I'm just putting it out there....[/QUOT

good call

oh my pos has bolt ons nothing fancy

[gottraction?]

thanks blackshine i will have to check that out! and hillclimb your car looks really clean man! Well if anyone has any rotarys lmk

[blackshine007]

[QUOTE=blackshine007]Not to be funny or anything, but word on the interwebz is that SDR is having a 15 second day so if you wanna take your grudges out on someone, it would be a good spot to meet up with everyone. I'm just putting it out there....[/QUOT

good call

oh my pos has bolt ons nothing fancy
So does mine :ninja:

When we supposed to run?

[gottraction?]

me and u?

[blackshine007]

^^ I don't want to embarrass you too much if I were to run you so it would probably be best if we didn't run. I was talking to Chris (HillClimbGuy)

[HypnoToad]

i dont have a rotary anymore,but maybe i can do it sometime.

[gottraction?]

i see. well i was looking for a rotary but i think they are slim so i may have to run a few na piston cars with around the same power! if your talking about running your 626 ill trash this stock exhuast in a few weeks then we can run if your na!

[blackshine007]

I'm n/a. All bolt on's.

[HypnoToad]

whats a 626 got,not a klze is it?

and im stock

[Siverprobegt]

whats a 626 got,not a klze is it?

and im stock
:ninja:

[HypnoToad]

:ninja:

hmm:ninja:

[Siverprobegt]

hmm:ninja:
Hmmmmmmmmmmmmmmmmmmmm :ninja:

[HypnoToad]

ok,idk whats going on,lol

[Siverprobegt]

we both have stock klde :ninja:

[HypnoToad]

i have one too :ninja:

[blackshine007]

we both have stock klde :ninja:
And we both make the same power..... The green one is faster.

[HypnoToad]

And we both make the same power..... The green one is faster.

i know it is,thank you:D

[gottraction?]

I have owned a 94 mx-6 before so i know those things can pull i thought it was a kl03 though! o well its been a while. well if i can find somewhere to do this cutout for me im down to meet up with you!

[Siverprobegt]

I have owned a 94 mx-6 before so i know those things can pull i thought it was a kl03 though! o well its been a while. well if i can find somewhere to do this cutout for me im down to meet up with you!

Maybe me too :ninja:

[gottraction?]

brought back from the dead! I have a very midly modded 1st gen fb 13b! looking for other 12a's or 13bs! would even run a stock t2! Just like to see where im at before i go mod crazy! maybe a dig run and a few rolls from 30 up or so! LMK

[Machado]

Where do you live? My SE is close to stock, and i wouldnt mind checking out your car :D

[gottraction?]

gwinnett

[NoRotor]

In for the N/A Rx7 fun?!?

[HypnoToad]

i heard N/A FDs are slow as shit,lol.

[Andy_013]

I have a 12a but its not in a rx7 :ninja:

[gottraction?]

sounds good to me! is it a na? how much power u makin? pm me!

[DVSRX-7]

Yo Dee...



Let me finish my triple dorito engine and then we can run. :ninja:

[DVSRX-7]

In for the N/A Rx7 fun?!?

Mofucka no V8's!! :taun:

[antj101]

Mofucka no V8's!! :taun:

DUDE!!!!! :boobies:Where's my mota woman?:boobies:

[gottraction?]

triple ehh

[NoRotor]

Mofucka no V8's!! :taun:
http://logicalhiphop.files.wordpress.com/2008/09/camron-400a042607.jpg
U rotard?

[Boosted FC]

I'm in when I get my FC back. When & where?

[gottraction?]

is it na or t2? mods? hopefully stock if its a 13bt lol

[Boosted FC]

is it na or t2? mods? hopefully stock if its a 13bt lol

T2. Only has an intake & exhaust.

[gottraction?]

exhaust will be a major mod! i use to own 2 t2s! one ran 13.6 on 13lbs i/full exhaust. im no where near that fast lol

[HillClimbGuy]

I want to play no drift battles tho lol

[yomomspimp06]

trini, you need a new exhaust don't you ;) maybe even a rotaryshack short throw shifter, walbro 255 or 720cc injectors. I'm just sayin I could throw your way for the right price.

[gottraction?]

I want to play no drift battles tho lol

pmed ya

[Boosted FC]

trini, you need a new exhaust don't you ;) maybe even a rotaryshack short throw shifter, walbro 255 or 720cc injectors. I'm just sayin I could throw your way for the right price.

I may take you up on the STS & Walbro.

[DVSRX-7]

DUDE!!!!! :boobies:Where's my mota woman?:boobies:

It's not out yet:tongue1:

[DVSRX-7]

triple ehh

:goodjob::taun:

[tdurr]

i got one for ya op. first one to blow their motor at 8k will pay for the others rebuild :crazy:

[Boosted FC]

i got one for ya op. first one to blow their motor at 8k will pay for the others rebuild :crazy:

lol, I'll have to pass on that one Tim.

[gottraction?]

ya no thanks! anyone else?

[tdurr]

awww no takers?? lol

[SeePlusPlus]

Wanna walk all over my slow junk? Renesis ftl

[Boosted FC]

Wanna walk all over my slow junk? Renesis ftl

Yep, that I can agree with. Unless you are SC or Turbo. Which one is it? If you are stock, no need to play unless your engine is still under warranty. You know how those Renesis engines are.

[DVSRX-7]

Soooooooo. My 3 rotor is about to be done. I rebuilt it and did a perfect bridgey on it. Now on to EBay it goes. $6,500 O.B.O

[gottraction?]

Wanna walk all over my slow junk? Renesis ftl



sounds good is it stock?pm me so we can set up

[Boosted FC]

Soooooooo. My 3 rotor is about to be done. I rebuilt it and did a perfect bridgey on it. Now on to EBay it goes. $6,500 O.B.O

Why the hell did you get a 3rotor & have nothing to put it in?

[87 Turbo II]

Just letting you know I got delayed a little bit on my clutch swap, but I am still down to run after the clutch goes in and I put my 500 city miles of break in on it.

[gottraction?]

cool deal man lmk

[Machado]

let me know if you are ever in the Powder Springs/ Douglasville area :goodjob:

[gottraction?]

Never out that far man! lol but pm me and we can set something up!! you get that idle fixed?

[DVSRX-7]

Why the hell did you get a 3rotor & have nothing to put it in?

Shhhhh no one has to know why

[gottraction?]

put it in a gsl-se lol

[DVSRX-7]

put it in a gsl-se lol

sell me yours then lol

[gottraction?]

hmmm

[DVSRX-7]

:D

[gottraction?]

how much u talkin lol

[DVSRX-7]

$500 haha JK

[antj101]

Soooooooo. My 3 rotor is about to be done. I rebuilt it and did a perfect bridgey on it. Now on to EBay it goes. $6,500 O.B.O

so that's what the fuck you've been up to, you :ninja: bastard:crazy:

[DVSRX-7]

so that's what the fuck you've been up to, you :ninja: bastard:crazy:

Yea need to make money man. I would love to stay in this car game and all but I'm going to school and have a family to feed as well so yea the 20B has been bridge ported by me and being rebuilt by me. :D

Hopefully someone buys it before I find a clean 1st or 2nd gen shell to put it in.

[Boosted FC]

Yea need to make money man. I would love to stay in this car game and all but I'm going to school and have a family to feed as well so yea the 20B has been bridge ported by me and being rebuilt by me. :D

Hopefully someone buys it before I find a clean 1st or 2nd gen shell to put it in.

Oh boy, is it gonna run? :lmfao:

[DVSRX-7]

Oh boy, is it gonna run? :lmfao:

As far as I know ever engine I have rebuilt or worked seems to start or work right. So you can doubt me I don't care, I know my work is done right.

[SeePlusPlus]

Yep, that I can agree with. Unless you are SC or Turbo. Which one is it? If you are stock, no need to play unless your engine is still under warranty. You know how those Renesis engines are.

Even though its an 05, it's only got 35,xxx miles on it, so I'm not doing anything engine wise till my warranty is up. In the meantime, the FI/Engine swap fund is steadily growing as I wait

[gottraction?]

well seeplus send me a pm! id like to see how a old 13b gsl-se hangs with a renesis

[Boosted FC]

I'm up & running if you still want to do this.

[Boosted FC]

Even though its an 05, it's only got 35,xxx miles on it, so I'm not doing anything engine wise till my warranty is up. In the meantime, the FI/Engine swap fund is steadily growing as I wait

So, you're gonna wait another 64K miles? You do know the engine is waranteed up to 100k miles with Mazda?

[SeePlusPlus]

So, you're gonna wait another 64K miles? You do know the engine is waranteed up to 100k miles with Mazda?

Yeah I do, but I've got a long time till I'll be done with college. And I plan on turning the RX-8 into a track toy when that time comes. For now it's all about keeping it under warranty and reliable to get me where I need to go. I can imagine by the time college ends my warranty will be passed and I won't care about tearing into the bay.

[Boosted FC]

Yeah I do, but I've got a long time till I'll be done with college. And I plan on turning the RX-8 into a track toy when that time comes. For now it's all about keeping it under warranty and reliable to get me where I need to go. I can imagine by the time college ends my warranty will be passed and I won't care about tearing into the bay.

That I can definitely understand.

[gottraction?]

i will run you on stock boost! i dont have my full exhaust done yet but im changin my manifolds this weekend! you free next weekend?

[Boosted FC]

i will run you on stock boost! i dont have my full exhaust done yet but im changin my manifolds this weekend! you free next weekend?

I should be. I'll let you know.

[The Great NY]

why not just dyno the damn thing so you know where ur at and be done with it, lol, instead of Public posting ur gonna street race, lol

[Boosted FC]

why not just dyno the damn thing so you know where ur at and be done with it, lol, instead of Public posting ur gonna street race, lol

:blah: :blah:

:lmfao: :lmfao: :lmfao: