View Full Version : Power Mods d16y8 build
terrytowe22
04-22-2009, 08:47 PM
i am lookin to build my d16y8 i wanna go al motor and be quick
show me some set-ups that i could go with and what kind of power i would be makeing. thanks in advance.
primespark22
04-22-2009, 09:09 PM
look the only way to really get power out of a d series is forced induction,take a look at this guys d series build and the numbers he put out on a n/a setuphttp://www.honda-tech.com/showthread.php?t=2543199
Starrfire
04-22-2009, 10:23 PM
you can basically only spice up a D series, not really get big improvements. Like a pm3 usdm d15b7 piston, which ups your compression pretty well to 12.2:1 which your stock p2p would go nuts over. The only way to even see gains is to change to obd1, and then tune it. But its all in what you want. You can do it the cheap way and see a little bit of power increase. but probably still gonna be around stock b16 power.
Fun, but not fast. But at the same time its better than what you got.
b16ftw
04-22-2009, 11:28 PM
all motor d ftmfl.
boost if you're stuck with a d.
d16_turbo
04-22-2009, 11:39 PM
you can make an all motor d series fast, here is an example:
the insight in the far lane
http://www.youtube.com/watch?v=GCYuVEWd4kw&feature=related
xdavidscenex
04-23-2009, 05:47 AM
kyle...thats an f22...
heres a d16z6 from PR
http://www.youtube.com/watch?v=zulee2XCgxU
heres info on building a NA d16y8
http://d-series.org/forums/engine-building/21761-building-powerful-street-na-d16y8-z6.html
00CiViC00
04-23-2009, 01:48 PM
boost it , you will be much happier
jr4mny
04-23-2009, 04:08 PM
boost it , you will be much happier
ive heard something aboutthe y8 head giving oil problems when boosted that its better to keep the block and put a z6 head on it...correct me if im wrong :doh:
d16_turbo
04-23-2009, 05:56 PM
ive heard something aboutthe y8 head giving oil problems when boosted that its better to keep the block and put a z6 head on it...correct me if im wrong :doh:
the y8 oil pumps have problems, but you can port and shim it
SKarpenz
04-24-2009, 03:54 PM
Yeah, the Y's have oiling problems due to the pumps. The Z6 is probably the wisest choice of D's for boosting. All motor D's cannot make the power like N/A DOHC's. Go with boost if your set on a SOHC.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.