PDA

View Full Version : Tech lookin for a job



hayes0658
04-20-2009, 09:16 AM
so i just moved here from Raleigh N.C..Iv been working on cars now for about 5 years... i use to work at a shop called Tuner Solutions..we did every thing from basic maintenance to high performance...iv built 4 supras any where from 500-800hp,tt 300zx swaps, a few rx7, iv done S13 S14 and S15 sr20 swaps, sr20 into g20, supercharged scions, just about everything honda, im good with wiring, my work is clean...i just need a job...im about out of money...hell ill sweep floors and clean windows..ill take anything i can get...but i would really like to work at shop doin what i was doin befor..let me know if anyone has any suggustions...thanks

dizzle
04-21-2009, 06:26 AM
i'll vouch...

GGPIS3
04-21-2009, 08:12 AM
when you say you've built.... what exactly did that entail?

Hayes21890
04-21-2009, 08:24 AM
sweet name yo! haha

hayes0658
04-21-2009, 08:38 AM
well iv done single turbo upgrades...iv had to tear motors all the way down...and iv put pistons, rods, head gaskets etc in...but it all depended on how far the customer wanted to go and how the internals looked as to what i was able to do...our shop didn't do machine work...and i don't do machine work...if that's what your asking...but i do know how to tear them down and put them back together..

hayes0658
04-21-2009, 08:39 AM
sweet name yo! haha

haha you too

GGPIS3
04-21-2009, 10:02 AM
are you ase certified?

hayes0658
04-21-2009, 10:35 AM
nope...those are my next plans...the shop i was at before was paying me 25 an hour commission and when i had first started working with them they had talked about sending to me school...i worked 80 hours or more a week so i didn't really have the time...one of the main reason i moved here was to try and go to night school and take some classes...but i do have pictures of the cars i built, swapped, put together, wired, worked on...

green91
04-22-2009, 09:03 PM
Dan how much you pay for ASE master tech with years of import experience? lol.

WTF?
05-03-2009, 08:25 PM
Dan how much you pay for ASE master tech with years of import experience? lol.

the shops i worked at usually 28 to 30 plus on flat rate

green91
05-03-2009, 08:32 PM
Must have been domestic shops

latin_lover
05-20-2009, 04:17 PM
HEY IM LOOKING FOR A TECH IN MY SHOP IF YOUR STILL LOOKING YOU CAN CONTACT ME A MY SHOP # 7704482311. WERE LOCATED IN NORCROSS.