*1991 Honda CRX HF, JDM Frontend, B18c1 swap*

[toonz]

Vin#jhmed8363ms023614
Block code#4300442

Honda crx with a gsr swap come and get it! This car runs great needs a bit of tlc but can make a great daily driver. B18c1 bored .20 over with pr3 pistons for higher compression, AEBS intake manifold, DC 4-1 race headers, Hasport mount kit, obd1 harness from rywire, po6 chipped ecu vtec hits at about 5400 runs great!

Jdm frontend is in great shape except for hood has a couple dings in it but can be repaired for $150 as far as the rest of the body it is in great shape no rust at all. Seats are torn but other than that the interior is great.
200k on car 85k on motor!

$2900 obo

call my cell for quickest contact
6782005166 leave a message
6786515887
email [email protected]

[quickdodge®]

Post block code, please. And any interior shots? Later, QD.

[toonz]

not infront of the car but should have it tonight I had this up fro sale b4 if you can find the thread it has the block code on it oh and will have more pics up soon thanks qd

[Tech5]

more details please

[300zx1224]

wanna trade for a automatic 300zx

[quickdodge®]

not infront of the car but should have it tonight I had this up fro sale b4 if you can find the thread it has the block code on it oh and will have more pics up soon thanks qd

You're welcome, but since you know you have a thread, you could search for it now. If not, it'll have to be locked until you can get it. Later, QD.

[thirdgenss]

interested in a camaro?

[silversol]

pic of the block code/vin for the swap!

[toonz]

Block code 4300442

[E=MC²]

this shouldnt last long

[thirdgenss]

interested in a camaro?

??

[dwnsthGABOY]

does the motor still need new rings?
Does the driver-side bolt still need to be re-threaded?
lmk

[Scotsman]

great seller , whaz happenin toonz? , long time no see

[B00STedSvT]

does the motor still need new rings?
Does the driver-side bolt still need to be re-threaded?
lmk...2 very good questions...any reply?.. and any interior shots?

[Tech5]

does the motor still need new rings?
Does the driver-side bolt still need to be re-threaded?
lmkx2 I would like these details also !

[tinkolby_25]

any trades?

[toonz]

Down for a good trade plus cash depends on car and the bolts are fixed by scots machine shop and as for rings it blows a little smoke at 8500 or more rings could be changed but not asap tho I have the rings and head gasket to go with it!

[Scotsman]

great seller , whaz happenin toonz? , long time no seeits ok ignore this post:taun:

[toonz]

Interior pics will be up soon but cmon man lol the interior is good you need seats tho si seats are torn at the normal spots on si seats

[toonz]

Drunkdude I got you lol trust me I been busy and as for the k still got it and I bought a si hatch just chillin trying to get a house just waitn for wifey to pick

[Scotsman]

Drunkdude I got you lol trust me I been busy and as for the k still got it and I bought a si hatch just chillin trying to get a house just waitn for wifey to picksweet

[IndianStig]

http://www.importatlanta.com/forums/showthread.php?t=229414

Trade?

[toonz]

Thanks but no thank you nice car tho

[toonz]

Bump

[toonz]

Bump

[Jaspecivics]

Got a green eg hatch www.myspace.com/jaspec March 09 Its still on and poppin? Let me know, either way GL!

[jamesb18c1]

pm me with the lowest amount of cash you can do on this. I want it..

[Jaspecivics]

Pm'd my brother said he will trade str8 up but we are keepin our rims! No B/S, have u seen the pics?

[toonz]

Hatch is cool didn't see all the pics pm me details and the dude that wanted to know the lowest I would take lol how much you got come test the car make an offer and take it gotta finish my k man so I need this gone asap I have a job doing emissions so I'm not down with the recession era lol cheap price just to give a good deal

[toonz]

To a good owner or even a young kid with dreams of wanting one that would put a bit of time into it

[allmotorX]

Bump for a cool dude!!glws

[Jaspecivics]

Pm'd my number 2 u still didnt get a call if you didnt get it my number is 706 421 4247 Jason

[toonz]

Bump

[300zx1224]

wanna trade for a auto 300zx

[toonz]

No thanks but thank you

[gerardojdm]

What transmission does it have. Cable or hydro

[southside]

dang if I was looking for a car this would be it.

[toonz]

Hydro gsr tranny converted with hasport conversion kit

[toonz]

Bump I have ef8 rear disc conversion to go with it. And. I
want Lil D's ef9 frontend 2500 bump

[toonz]

Or trade for a 4 door honda or acura automatic plus cash

[JDMJAYDC2]

gl on it toonz i hate to see it go man shit is damn fast

[toonz]

I know but have too many projects right now something needs to get done the k is almost done k24 accord block with a k20 head is my chucky build but my si hatch is too clean to be without ac and I want a clean simple swap so k might be up for sale or either keep it for a cheap shell I might get and also helping my brother with his jdm da build which gets all my time lol

[rsxdc52002]

r u needin and honda parts plus 2500 cash

[toonz]

What? 2500 for the car swapped with headgasket, rings, jdm frontend and ef8 rear disc conversion with the prop valve to go with it

[Black4DrEK]

GLWS

I bet this thing is quick!

[toonz]

Bump need it gone so make offers

[toonz]

Bumpy

[toonz]

Changed the contact info

[toonz]

Bump

[bigdare23]

You should post a f/s add on CRXCommunity


http://www.crxcommunity.com/viewtopic.php?f=2&t=27933

[toonz]

Good lookn out my dude bump need someone to come get this but dnt need the stupid lowballin jokes lol its a 91 crx hf with no rust a gsr hydro swap, rywire obd1 wire harness, hasport motor mounts, p06 chipped ecu tuned with vtec hittin at 5400 redlineing at about 9000 rpm, and a jdmfrontend!

[toonz]

What more do you want it smokes but after vtec and its not smoke like ya aunts grandprix lol I'm giving brand new rings and a head gasket to go with it u wanna know y cuz I'm cool and hate the bs honesty is muthfucka jus want it gone wifey says I can't put anymore money on the k build cuz we gotta get the house so one of the toys gotta go to hit low numbers in this car all u need to do is add cams for this setup I built going by Mr.kidds na keep it simple recipe

[Shadow102]

Wow I can't believe this isn't gone yet...if I could unload my rx7 fast enough I would pick this up but I don't see that happening glws

[toonz]

Should be gone friday bump

[toonz]

Bump

[toonz]

Bump 1800 without jdmfront

[toonz]

Dnt call me if ur bullshytn for real

[HMGDRFTER]

Bump 1800 without jdmfront

does it come with the stock front then? or nothing?

[TheChosenOne]

Bruh, this car seems to be worth every penny your asking! I wish i had to money! GLWS! :boobies: :goodjob:

[toonz]

Bring your own frontend I got the usdm bumper and headlights but please listen don't call me unless u have cash no test driving until I see some cash u wanna see how it looks go to page 1

[toonz]

Going in the autotrader cuz everybody dosn't do ia lol

[toonz]

Read my last 2 posts asap

[300zx1224]

you take 2200

[toonz]

Sold delete please D holla at me