jap_racer1
03-28-2009, 01:52 PM
I have a set of crower cams stage 2 na to be exact i used them for about 2k miles power was good especially vtec kicked harder than stock I went boost so no longer need.
for all you all motor guys out there these are for you
i had aem cam gears on there but they have been sold already
I am asking $350 for just the cams but will take offer as long as there not to lowbally if thats a word?
here are the specs
63402A-2 (http://www.crower.com/cgi-bin/detail.cgi?prod_id=63402A-2) Stage 2 http://www.crower.com/cat/import/honda/images/bullet3.gif Stock idle lobes (sec/pri) with #63402 VTEC (mid) lobes. http://www.crower.com/cat/import/honda/images/bullet3.gif Recommend #84163 spring unless stock rev limit. http://www.crower.com/cat/import/honda/images/bullet3.gif RPM Range: Idle to 9250+ http://www.crower.com/cat/import/honda/images/bullet3.gif 18+ hp over B18C Int- 311 mid
Exh-308 mid Int- 255 mid
Exh-248 mid Int- 466 mid
Exh-466 mid
pm me for info
for all you all motor guys out there these are for you
i had aem cam gears on there but they have been sold already
I am asking $350 for just the cams but will take offer as long as there not to lowbally if thats a word?
here are the specs
63402A-2 (http://www.crower.com/cgi-bin/detail.cgi?prod_id=63402A-2) Stage 2 http://www.crower.com/cat/import/honda/images/bullet3.gif Stock idle lobes (sec/pri) with #63402 VTEC (mid) lobes. http://www.crower.com/cat/import/honda/images/bullet3.gif Recommend #84163 spring unless stock rev limit. http://www.crower.com/cat/import/honda/images/bullet3.gif RPM Range: Idle to 9250+ http://www.crower.com/cat/import/honda/images/bullet3.gif 18+ hp over B18C Int- 311 mid
Exh-308 mid Int- 255 mid
Exh-248 mid Int- 466 mid
Exh-466 mid
pm me for info