KiddRACING RSX/EP3/EM2 "DONKEY" Header *PRE-ORDER SALE* [Archive] - IMPORTATLANTA.COM - Automotive, Lifestyle, Offtopic, Forum, Blog, & Online Community

View Full Version : KiddRACING RSX/EP3/EM2 "DONKEY" Header *PRE-ORDER SALE*

Vteckidd

03-20-2009, 11:06 AM

We are proud to announce our K20 RSX/EP3/EM2 Header! After many long months of anticipation, the headers are here.

IN STOCK
PM ME FOR PRICING

IN STOCK
PM ME FOR PRICING

IN STOCK
PM ME FOR PRICING
KiddRACING K20 RSX/EP3/EM2 Header SPecs
-304 Stainless Brushed Steel
-2.5 in collector
-Hand Tig Welded
-RSX comes with extension piece to bolt to STOCK exhaust
-1 Year Warranty against breaking/cracking backed by me
-FITS ALL K SERIES : K20A3, K20A2, K20Z1
-Will fit K24 but you have to notch Rear Crossmember
-FITS ALL CHASSIS: DC5 (RSX), EP3 (02+ Civic SI), EM2 WITH K Swap
-10+ Whp Gain over Stock and other Aftermarket headers

http://i24.photobucket.com/albums/c21/Vteckidd/rsxheader4.jpg

http://i24.photobucket.com/albums/c21/Vteckidd/rsxheader3.jpg

http://i24.photobucket.com/albums/c21/Vteckidd/rsxheader1.jpg

http://i24.photobucket.com/albums/c21/Vteckidd/rsxheader2.jpg

HEADER INSTALLED ON AN EP3

http://i24.photobucket.com/albums/c21/Vteckidd/IMG_0327.jpg

http://i24.photobucket.com/albums/c21/Vteckidd/IMG_0331.jpg

http://i24.photobucket.com/albums/c21/Vteckidd/IMG_0330.jpg

http://i24.photobucket.com/albums/c21/Vteckidd/IMG_0328.jpg

Compared to Borla Header (10whp gain over this header with NO TUNING on CHunkys setup)
http://i24.photobucket.com/albums/c21/Vteckidd/IMG_0335.jpg

http://i24.photobucket.com/albums/c21/Vteckidd/kidd_racing.jpg

IN STOCK
PM ME FOR PRICING

CONTACT:
[email protected]
404-234-8651
AIM:Vteckidd

Vteckidd

03-20-2009, 11:33 AM

S2000 is coming in at the same time as well :gasp:

Vteckidd

03-20-2009, 05:07 PM

upupup

silversol

03-20-2009, 07:32 PM

who is we? bump!

B20_B

03-20-2009, 08:41 PM

will that fit my 07 Civic si, and what the price?

nmp591

03-22-2009, 11:09 AM

lemme get that for the low?

Vteckidd

03-22-2009, 11:21 AM

will that fit my 07 Civic si, and what the price?
06-08 SI Is coming same time as these

k20siboii

03-22-2009, 12:51 PM

will it fit the four door Si
?

Vteckidd

03-23-2009, 11:29 AM

SOrry only fits what is listed

mezzies96teg

03-23-2009, 03:00 PM

pm'd you KIDD! later

Mezz

Tensa_Zanget

03-23-2009, 07:01 PM

Pm'd

Tensa_Zanget

03-23-2009, 07:01 PM

Pm'd

K20Z1

03-23-2009, 08:56 PM

pm'd

RotiEatter

03-23-2009, 10:27 PM

Bump for a gangsta.

mezzies96teg

03-24-2009, 01:28 AM

*edit-inbox was full bro but now all clear! later pimp!

Mezz

Vteckidd

03-25-2009, 05:09 PM

upupupupup

Vteckidd

03-27-2009, 11:08 AM

upupup

SP33D FREAK

03-30-2009, 03:01 PM

Mike Recaro SRD coming soon?

Vteckidd

03-30-2009, 05:26 PM

Yes end of April

Arm&hammer

03-30-2009, 05:47 PM

k20 swap header coming soon?

Vteckidd

04-03-2009, 01:07 PM

i already have a K20Swap header

IMPORTchic

04-06-2009, 10:15 PM

Bump :rolleyes:

Goinfasterthanu

04-06-2009, 10:26 PM

Pm price for 02 rsx....

K24cb7coupe

04-07-2009, 10:22 AM

will this header fit a car with a kseries swap??

Vteckidd

04-07-2009, 11:30 AM

No but. Have a k swap header already looks the same

OSUPatrick

04-14-2009, 09:52 AM

These are from overseas right? So that makes them JDM right? Do you get free stickers when you pre order? I have stickers of all my sponsers because a sponser is a company you BUY parts from right?

Vteckidd

04-15-2009, 10:40 PM

upupup

mezzies96teg

04-15-2009, 11:56 PM

pm me how much for one for my '05 TSX man! thanks kidd

Mezz

Sobe_Death

04-28-2009, 11:24 AM

Interested to see S2000 numbers...

vtec_si

05-14-2009, 01:48 AM

please p.m me the price for 04 tsx. thanks

Get-R-Done!

05-17-2009, 11:31 AM

pm me price for a 04 rsx-s

Vteckidd

06-02-2009, 11:13 AM

Pre-ORDER price is $450 shipped

YOu can alos buy them direct through CLUBRSX

ETA IS SOON PEOPLE, THEN THE PRICE GOES UP

mezzies96teg

06-02-2009, 10:09 PM

hey mike how is the clearance? do the lower tubes hang really low? will be sending you money for one of these very soon bro!

Mezz

Vteckidd

06-05-2009, 11:06 AM

its got about just a good a ground clearance as anything.

FIRM arrival date is now June 20th

Vteckidd

06-30-2009, 02:17 PM

they are here!

Vteckidd

07-06-2009, 02:57 PM

BUMP

Vteckidd

07-09-2009, 12:12 PM

IN STOCK!

Vteckidd

07-09-2009, 12:22 PM

IN STOCK!

bandydesign

07-09-2009, 12:24 PM

I'd hit it

Vteckidd

07-11-2009, 10:59 AM

upupup

Vteckidd

07-16-2009, 10:56 AM

UP UP UP

Vteckidd

07-16-2009, 06:25 PM

in stock

http://i24.photobucket.com/albums/c21/Vteckidd/IMG_1910.jpg

Vteckidd

07-17-2009, 05:55 PM

BUDDY CLUB RACE HEADER versus KiddRACING KRUSHER HEADER

BIG THANKS TO MAINSTREAM PERFORMANCE 678-567-9384. They dynoed my Krusher RSX header versus the popular Buddy Club Race Header today. Results speak for themselves.

http://i24.photobucket.com/albums/c21/Vteckidd/IMG_1944.jpg

http://i24.photobucket.com/albums/c21/Vteckidd/IMG_1109.jpg

http://i24.photobucket.com/albums/c21/Vteckidd/IMG_1952.jpg

http://i24.photobucket.com/albums/c21/Vteckidd/IMG_1953.jpg

http://i24.photobucket.com/albums/c21/Vteckidd/IMG_1954.jpg

http://i24.photobucket.com/albums/c21/Vteckidd/IMG_1955.jpg

http://i24.photobucket.com/albums/c21/Vteckidd/IMG_1958.jpg

Weld quality comparison
http://i24.photobucket.com/albums/c21/Vteckidd/IMG_1956.jpg

Sway Bar CLearance
http://i24.photobucket.com/albums/c21/Vteckidd/IMG_1960.jpg

http://i24.photobucket.com/albums/c21/Vteckidd/IMG_1970.jpg

Test Pipe installed with stock O2 Sensors
http://i24.photobucket.com/albums/c21/Vteckidd/IMG_1971.jpg

http://i24.photobucket.com/albums/c21/Vteckidd/IMG_1974.jpg

http://i24.photobucket.com/albums/c21/Vteckidd/IMG_1975.jpg

http://i24.photobucket.com/albums/c21/Vteckidd/IMG_1976.jpg

http://i24.photobucket.com/albums/c21/Vteckidd/IMG_1918.jpg

http://i24.photobucket.com/albums/c21/Vteckidd/IMG_1112.jpg

I forgot to email myself the dyno charts shop is doing it tonight when the get a minute.

BCRH 188whp
KiddRACING KRUSHER 194whp

NO TUNING

Ill get the graphs up, i save them from WinPEP to the desktop at Mainstream and i forgot to email them to myself. They are tuning a car and i was in a rush to leave cause ATL traffic SUCKS. They are going to forward them to me shortly.

Ill tell you though that down low they are about the same, 6000rpms up mine pulled away.

The car is A LOT QUIETER with my header, surprised me. The BCRH kinda drones and was really loud, mine is way more quiet.

The graphs were about the same, and VTEC remains unchanged. This is a STOCK ECU, no KPRO or flash

Vteckidd

07-20-2009, 10:29 AM

Bump it for power

Vteckidd

07-21-2009, 09:48 PM

thanks for the local orders!

Vteckidd

07-27-2009, 11:23 PM

in stock! if you have an RSX there is no reason NOT TO OWN THIS HEADER!

Vteckidd

08-17-2009, 12:06 PM

SMOKIN DEALS RIGHT NOW, AUG SPECIALS GOING ON

Sobe_Death

08-17-2009, 04:02 PM

Hey question, are you making S2000 headers right now, and if so, is this one of them being sold through BatlGround?

Vteckidd

08-17-2009, 04:23 PM

Hey question, are you making S2000 headers right now, and if so, is this one of them being sold through BatlGround?

http://cgi.ebay.com/ebaymotors/HONDA-S2000-S-2000-2009-02-09-TRI-Y-TRI-Y-RACE-HEADER_W0QQitemZ110414294007QQcmdZViewItemQQptZMot ors_Car_Truck_Parts_Accessories?hash=item19b5346bf 7&_trksid=p3911.c0.m14

Yes we both sell the same header.

Tech5

08-17-2009, 04:36 PM

good luck mike

S II K

08-17-2009, 05:03 PM

called number provided and left vm. im interested!

Vteckidd

10-21-2009, 01:54 PM

upupup