swap shops

[kbiais]

nebody know some good and decently priced swap shops around here i could drop the engine in myself its just fooling with the wiring and cpus i dont know much about

[punkr6]

What are you swaping ?

[Scotsman]

check out the sponsors section

[Barefoot]

What are you swaping ?:goodjob::goodjob: more info.

[kbiais]

probly going with the b16a with auto trans

[kbiais]

but was thinkin of the h22a also but was talking to a guy who swaped in the b18b and said he liked it alot but i want the vtec

[kbiais]

im tring to put it in a 93 del sol s

[punkr6]

you can don it all yourself, all you need to do is run the vtec wires and get a DOHC del sol shift linkage. There is a guy selling that on here right now. Rywire.com will sell you the wireing sub harness for 40 bucks and its plug-n-play....Do it yourself and you will learn something ...

[Vteckidd]

or support our sponsors

Check out MainstreamPerformance.com they are the honda masters around here

[Scotsman]

or support our sponsors

Check out MainstreamPerformance.com they are the honda masters around hererepost ,lol

[yunglaosta]

wait..all this on a auto trans?

[punkr6]

wait..all this on a auto trans?

I know right :surrender

[kbiais]

dont want to convert more of a headache slave cylinder pedals and all pain in the ass

[kbiais]

yea i heard i would need to run a straight wire to my ecu for vtec or get a controller yea and i seen dude on here with the linkage ill be hitting him up thanks though

[punkr6]

yea i heard i would need to run a straight wire to my ecu for vtec or get a controller yea and i seen dude on here with the linkage ill be hitting him up thanks though

You need a vtec ecu not a controller

[kbiais]

the p30 right but thats for a 5 spd so i probly need the jdm p72 for a gsr huh

[Black4DrEK]

DUDE just swap 5speed while your at iT! NOT THAT HARD BRO!!!!! if you can do the motor swap how can you not switch pedal assembly.....

[kbiais]

didnt say i couldnt said didnt want to

[Black4DrEK]

^^ what ever dude.. put the MAN pedal in and stop being a poon!

[kbiais]

haha

[yunglaosta]

its not going to be worth it man. if your tryna swap another motor in while keeping a auto trans, then i wouldnt bother swapping anything. just my 2 cents dude. if you really want to swap then your going to have to convert to manual.

[kbiais]

well might rethink but no promises

[kbiais]

r all yall boys r pro manual

[X-Runner]

Yes lol

[jap_racer1]

dude u can go auto if u want but manny would be better later down the road you can swap to manny its not a big deal about the same difficulty either way swap tranny shift linkage master cylinder with hydro lines unless going cable and a pedal assembly its all on what you want not what they want

if you need a place to get your swap in i would recomend automotive repair source in winder, GA they did my swap and a lot of my other shit no probs they do them all the time never a problem very smart and not to expensive usually around 700 - 1000 pending on car and problems and they usually do a complet swap in a day i took mine in the mourning drove it home that night depends on how busy they are!

if you want the number pm me and they warranty there work great people also!!

[kbiais]

preciate it mane ive been looking into the b20 vtc swap with gsr heads do u know if they did ne of those i wanna stay all motor and there r some b20 beasts on u tube

[kbiais]

heard its not that difficult of a swap just have to tap oil lines into the heads and what not

[X-Runner]

I know where you live :ninja:

[Barefoot]

heard its not that difficult of a swap just have to tap oil lines into the heads and what notget the golden eagle kit. makes life easy.

[kbiais]

golden eagle kit? where and what

[Barefoot]

as complete of a kit as your going to find on the market.
http://shopping.lightningmotorsports.com/customer/product.php?productid=380&cat=0&page=1

[kbiais]

thanks