Need Block re-surfaced

[DaRussian]

Ok, the surface of my block is uneven, the center back part of the block is lower then all the other sides. it was leaking oil into the coolant, at first i thought it was the headgasket, i changed the headgasket and it still leaks, i took off the head again and checked and the middle of the block is shaved a little. looks like somebody was cleaning the block and shaved a little more off then was supposed to.

Does anybody know where i can resurface the block so that its straight again?
its about 1/32 of an inch difference.
How much would it cost to resurface and who can do it?
any help is appreciated.

[DirtyMechanic]

if it really 1/32 then you need a new block. they will have to take to much off and the piston to rise above the deck and contact your head. POP!!!

[AnthonyF]

^POP is an under statement. New block time. What kind of engine?

-Ant.

[DaRussian]

if it really 1/32 then you need a new block. they will have to take to much off and the piston to rise above the deck and contact your head. POP!!!
no i think its actually less then 1/32, where can i get this done?

[AnthonyF]

^Get a new block. You'll be wasting your money.

-Ant.