View Full Version : How much will it cost??? need your help
how much will it cost to have my rs*r springs and my kyb's installed on my teggy and wheres the best place to have it done thanks
ranger250x
02-28-2009, 11:23 PM
shouldnt cost you anything if you do it right
Barefoot
03-01-2009, 09:56 AM
have yall forgot about this
http://www.importatlanta.com/forums/showthread.php?t=117313
dorin48
03-01-2009, 10:30 AM
Shops charge $400 give or take a little, like stated above. Solicitation of labor pwn./\ lol
Tech5
03-01-2009, 10:40 AM
Shops charge $400 give or take a little, like stated above. Solicitation of labor pwn./\ lol
OMG your way off most shops charge 250 tops if they do go else where
Brian*
03-01-2009, 11:36 AM
Do it yourself!! Its way to easy... I did my first set when I was 16, might as well learn so you know how
i know how to do it i just dont have time right now, rip Jeremy Lusk . I use to ride with them when i lived in so cal
Do it yourself!! Its way to easy... I did my first set when I was 16, might as well learn so you know how
Elbow
03-01-2009, 01:58 PM
Yeah do it yourself...
Humphrizzle
03-01-2009, 02:01 PM
very easy.. it seems like you need to re write your schedule if you dont have 2 spare hours in your day.
EmminoDaGreat
03-01-2009, 02:02 PM
lol at saying shops charge $400... i think we charge 220$.
Vteckidd
03-02-2009, 08:10 AM
DO NOT POST OR SOLICIT LABOR UNLESS YOU ARE A SPONSOR
seanrg1116
03-02-2009, 09:45 AM
yea do it in ur drive way (I recommend some PB-Blast) and be careful with ur LCA bolts
Tech5
03-02-2009, 11:07 AM
yea do it in ur drive way (I recommend some PB-Blast) and be careful with ur LCA bolts
Yes sir you said it right!!!
Mr Egg Rollllll
03-02-2009, 11:10 AM
DIY - I've knocked out EG/DC's in no time. Really easy to work on.
The BUCKY
03-02-2009, 11:39 AM
if your in the gwinnett area i can knock it out in a couple hrs for $100
VickNotic
03-02-2009, 02:18 PM
i could use the job!! 8D I sure can use the $$$$ i'll come to you!!!!
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.