PDA

View Full Version : 91 integra auto to manual wiring


GaGen2Teg
02-16-2009, 03:51 PM
need to know what i have to do with the wiring. help me please
JKOBD
02-16-2009, 06:58 PM
Are you just doing the auto to manual in the same OBD series.....1991? Or are you converting up to OBD1? What ecu are you going to be running?
GaGen2Teg
02-16-2009, 07:06 PM
auto to manual obd0 no staying obd0 gunna be runnin pr4 5spd
teh_mugen18
02-16-2009, 08:35 PM
Go to Autozone, etc. and get a Haynes manual, ALL wiring information will be in the back of that book in more detail than what can be provided over the internet....
wannab20hatch
02-16-2009, 09:50 PM
all you have to do as far as wiring is wire up for reverse lights if you want them. and wire in the switch.(makes the ignition think its in park all the time so you can start it.) i did the same swap in 2 of my hatches and helped a buddy do his DA. I never wired up the rev lights.

if you do want to wire them though i believe its the green and yellow wire together for the P switch.
GaGen2Teg
02-16-2009, 10:26 PM
what about if i originally had a manual car and im using the auto harness??? got any ideas?
wannab20hatch
02-16-2009, 10:51 PM
would you use the auto harness in a manual car?
GaGen2Teg
02-16-2009, 10:52 PM
yeah id try to make it work since im ignorant cant be that much different its basically like the reg. auto to manual swap
wannab20hatch
02-16-2009, 11:13 PM
the only difference in the harness is the park switch so either will work. and thats inside the car by the shifter
six7teen
02-17-2009, 01:02 AM
how about the speed sensor wiring? (sorry for a somewhat thread jack)

i just did a auto-manual in my 92 civic and cant get my speedometer to work..
GaGen2Teg
02-17-2009, 01:10 AM
all good siz7teen

youve been repped wannab20hatch!
d16_turbo
02-17-2009, 11:27 AM
how about the speed sensor wiring? (sorry for a somewhat thread jack)

i just did a auto-manual in my 92 civic and cant get my speedometer to work..

you dont have to rewire the speed sensor it should work
d16_turbo
02-17-2009, 11:29 AM
this should help you out

http://www.honda-tech.com/showthread.php?t=2419202
six7teen
02-17-2009, 02:01 PM
well i kept the automatic wiring harness.. and the speed sensor plug has three wires going into it, but the speed sensor is a two prong... and my speedometer doesnt work...
wannab20hatch
02-17-2009, 03:54 PM
how about the speed sensor wiring? (sorry for a somewhat thread jack)

i just did a auto-manual in my 92 civic and cant get my speedometer to work..

search on honda-tech. the obd1 cars are a little harder to convert.
wannab20hatch
02-17-2009, 03:55 PM
all good siz7teen

youve been repped wannab20hatch!

thanks man just let me know if you need anything else.