throttle body gasket question

[big mac]

aight so i need some help. i have a itr manifold on a b16a head. i need a throttle body gasket. but i dont know what throttle bodie i have so, is there any way to identify it or will and b series gasket fit?

[Barefoot]

i dont know about marking on the tb. not all the b series tb gaskets are the same.

[Barefoot]

got any pix of the tb

[b17a1db2]

if you have an itr manifold. order a TB gasket for a type r.

[Grimm Reeper]

Post pics of the side of the TB that the gasket is going on for better assistance

[JKOBD]

Standard bore TB? As the other guys have said, go and match it up. If it is oversized or you can not figure it out, you can always go to the autoparts store and buy some blanks and make your own....or just apply Honda-bond like I had to since mine was too big.

[Barefoot]

You can always go to the autoparts store and buy some blanks and make your own....or just apply Honda-bond like I had to since mine was too big.stop talking

[Tech5]

Take the Throttle body up to your parts store and match it up with the tb...Just get it for the TB the motor came off of or just say 98 LS and go from there...Dont Match it up with the manifold they are all the same on that ..Its the tb that is diifferent

[big mac]

http://i613.photobucket.com/albums/tt218/big_mizack/1234847079.jpgthis is the front of it let me get one of the backhttp://i613.photobucket.com/albums/tt218/big_mizack/1234847120.jpg

[big mac]

Up

[big mac]

up some one help me

[Grimm Reeper]

did u get that gasket yet?

[punkr6]

Take the Throttle body up to your parts store and match it up with the tb...Just get it for the TB the motor came off of or just say 98 LS and go from there...Dont Match it up with the manifold they are all the same on that ..Its the tb that is diifferent


Correct :goodjob: