Good break kit to get for an integra

[blacknightteg]

so my tegs brakes are beginning to squike and its been about two years or so since i have replaced them. i am thinking about going ahead and getting a break kit, rotars calipers, etc. what is a good one to get?

[Sammich]

GET SOME CERAMIC PADS AND SOME BREMBO BLANKS..I HAVE A BRAKE THREAD SOMEWHERE..LEMME FIND IT

[blacknightteg]

i see you finally wised up and have the good picture on there samwell. yeah i figured i might as well. im only going to put more mods on my car if it needs it, not caues i want to, so i figure this might be a good opportunity now.

[Sammich]

it is a good opportunity..thats what i did w/ my teg..everytime something went wrong or had to do maintenance..it was upgrade time..

but this is my thread

http://www.importatlanta.com/forums/showthread.php?t=159188

some good info in there..pretty much came down to, slotted and drilled rotors are not necessary and can eat up pads quicker than u want.

i personally want slotted for 'eye candy' but i think i will stick w/ blanks.

[blacknightteg]

i wasnt really concerned with getting slot/drilled ones, i just wanted a lil bit better braking. i mean its not bad now. but yeah.

[blacknightteg]

it is a good opportunity..thats what i did w/ my teg..everytime something went wrong or had to do maintenance..it was upgrade time..

but this is my thread

http://www.importatlanta.com/forums/showthread.php?t=159188

some good info in there..pretty much came down to, slotted and drilled rotors are not necessary and can eat up pads quicker than u want.

i personally want slotted for 'eye candy' but i think i will stick w/ blanks.


ill take a look at it later, i dont really wana go through all that right now. but thanks for the thread. did you have anything different on your teggy?

[Sammich]

heres my recommendation...especially since you wont be doing any racing...but this is pretty much teh best setup.

Brembo Blanks w/ Ceramic Pads...w/ ceramic pads you wont have to worry about brake dust...its so godly the way you can go for wks on end and the wheels still look practically clean.

i didnt get to doing brakes on teh teg, they were still good at that point, but i have ceramics on teh max, and its awesome. still have to get some brembos/blank rotors and replace my rear caliper as its dragging right now ...gay

[blacknightteg]

how much did it it cost you you think?

[Revmaynard]

Brake* and Squeak*. Couldn't help myself. LOL But unless you need major stopping power just get some OEM stuff, not like you have hardcore power or do track/mtn runs. :goodjob:

[blacknightteg]

yeah true, but iw as jsut seeing if there was something a lil bit better.

[Revmaynard]

Yea, kits can get expensive and just figure why spend so much on braking force if you never use it. But mod how you will.

[bigdare23]

I can build you a 11.1in brake kit

http://www.importatlanta.com/forums/showthread.php?t=165276

[Sammich]

get ceramics..thats the only part of the brakes u need to spend money unless u plan on showing the car or doing some serious racing..from what i've talked to u about w/ this car, unless you've changed ur mind, theres no need for this

[blacknightteg]

yeah. i dunno. i will see what i will do. im gunna do some serious things with it. just not for a while.

[patrick4588]

the wilwood brake kit is pretty cheap as far as other kits on the market. 4piston calipers, 2 piece rotors, and pads for <600

[yunglaosta]

nsx calipers?

[speedminded]

What's the budget?

[chaseamundo]

nice

[speedminded]

niceWhat is?

[Blitanicle99]

DOT 4 fluid, stage one pads (i use axis on my mazda), and steel braided lines will do the most difference for the cheapest price.

I am not honda friendly so I don't know what calipers come with your car.

My FC rx7 is 4 piston front, 2 piston rear and with the race pads, lines and fluid it brakes awesome.