View Full Version : d16 USDM swap into 89 crx si
Le_Stat
02-09-2009, 02:55 PM
i was wondering if this swap will fit right in or will i have to spend alot of time and money to make it fit from what i read i can take the mounts off my old motor and put them on this one and it should bolt right up,,,,,
ohh yea its a D16A1
xdavidscenex
02-09-2009, 03:09 PM
what kind of d16?
Le_Stat
02-09-2009, 03:12 PM
the one ur boy has 4 sale
EuroTra$h
02-09-2009, 03:20 PM
it will bolt straight up im almost positive its the same as the DOHC ZC and that bolted right up in my 91 hatch back so it should wotk
xdavidscenex
02-09-2009, 03:24 PM
the one ur boy has 4 sale
its a pretty easy swap. i posted a link about the swap on his sale thread.
dorin48
02-09-2009, 05:26 PM
NO. A d16a1 is the brown top zc out of the integra. It uses different mounts and makes less power than the other dohc zc's. www.thezcr.com (http://www.thezcr.com) is a good resource.
xdavidscenex
02-09-2009, 05:36 PM
NO. A d16a1 is the brown top zc out of the integra. It uses different mounts and makes less power than the other dohc zc's
:thinking:and your point?
dorin48
02-09-2009, 05:39 PM
OP was asking if it should bolt right up. No it wont. Other people in this thread made it clear that they weren't 100% positive with the exception of you lol. I am giving my thoughts thats all. Also a lot of people are constantly mislead into believing that the A1 is the same as a DOHC ZC, A8, or A9 which it isnt.
xdavidscenex
02-09-2009, 05:44 PM
OP was asking if it should bolt right up. No it wont. Other people in this thread made it clear that they weren't 100% positive with the exception of you lol. I am giving my thoughts thats all. Also a lot of people are constantly mislead into believing that the A1 is the same as a DOHC ZC, A8, or A9 which it isnt.
you are correct. but its not hard to do the swap. :goodjob:
++reps for you sir.
dorin48
02-09-2009, 05:45 PM
Yay i did good! lol back at you.
Le_Stat
02-09-2009, 08:57 PM
yea i kno its not the zc or else i would have put it up on the first post lol
six7teen
02-10-2009, 01:10 AM
i believe that it will bolt up if you have all the mounts.. i have a ZC swap out of a crx and got it to bolt into my eg civic perfectly!! only thing is to make sure you change this bracket...
http://i325.photobucket.com/albums/k374/six7teen/y-1.jpg
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.