View Full Version : **VIDEO** My car at the dyno.
SmackedInATL
02-05-2009, 12:15 AM
http://www.youtube.com/watch?v=t2uNCo43WKs&feature=channel_page
browningboy7
02-05-2009, 12:18 AM
:goodjob: Nice, Good Number bro!
TheGrillMan
02-05-2009, 12:18 AM
good numbers
SmackedInATL
02-05-2009, 12:20 AM
Those are STD, SAE numbers are 441/453. By the way, I baselined it before and number were 401/375. Thats what I had at the track.
Lankhoss
02-05-2009, 01:26 AM
Um, 80ft/lbs of torque is a MASSIVE difference.
SicStang03
02-05-2009, 01:49 AM
Um, 80ft/lbs of torque is a MASSIVE difference.
That's what a pulley will do :cheers:
xdavidscenex
02-05-2009, 01:51 AM
nice numbers!!
Civicn33b
02-05-2009, 10:58 AM
WEAKSAUCE!!! :)
SmackedInATL
02-05-2009, 10:59 AM
WEAKSAUCE!!! :)
Get some!!
nice. so you saying you had these number before or after the track?
MR.EM1
02-05-2009, 11:10 AM
nice. so you saying you had these number before or after the track?
at track 401/375 after track 441/453
SmackedInATL
02-05-2009, 11:16 AM
at track 401/375 after track 441/453
Correct. I had less power at the track.
1SLWPOS
02-05-2009, 01:35 PM
Why does it sound like your gear is so fking long like the dyno was done in 5th gear? Gratz on the progess though ;) Maybe one day we can race =P
bowdown201
02-05-2009, 01:39 PM
^^thats what I was thinking
Lankhoss
02-05-2009, 02:16 PM
Why does it sound like your gear is so fking long like the dyno was done in 5th gear? Gratz on the progess though ;) Maybe one day we can race =P
Since we have no idea how hard the guy was pressing the gas, he could wind it out for as long as he wants.
I'm just assuming that's what happened, instead of stomping it to the floor
1SLWPOS
02-05-2009, 02:26 PM
Since we have no idea how hard the guy was pressing the gas, he could wind it out for as long as he wants.
I'm just assuming that's what happened, instead of stomping it to the floor
Was the car tuned or just dyno'd and why would you not floor it? Just doesn't make sense to me :thinking: Looking for answers :goodjob:
SmackedInATL
02-05-2009, 02:44 PM
Was the car tuned or just dyno'd and why would you not floor it? Just doesn't make sense to me :thinking: Looking for answers :goodjob:
Car was definitely tuned with a xcal3 handheld. He was in 4th gear and pulled from 50-55 mph to 140 or so. That's where 4th ends. It was at WOT. 4th gear will pull very long from 55 mph.
SmackedInATL
02-05-2009, 02:47 PM
And yes, hopefully we can run em soon 1SLWPOS.
1SLWPOS
02-05-2009, 02:50 PM
LoL you should stomp me =P but also is your car 5 speed or 6?
SmackedInATL
02-05-2009, 04:14 PM
LoL you should stomp me =P but also is your car 5 speed or 6?
6 speed
LEAVINU
02-06-2009, 09:12 AM
Congrats. :goodjob:
Have forwarded to Alex to instigate a rematch if your interested. Same roll run would be interesting.
4drZ06
02-06-2009, 12:00 PM
http://www.youtube.com/watch?v=t2uNCo43WKs&feature=channel_page
my go cart puts down those numbers on 1 cylinder!:taun:
SmackedInATL
02-06-2009, 12:24 PM
Congrats. :goodjob:
Have forwarded to Alex to instigate a rematch if your interested. Same roll run would be interesting.
I'm down. I've already tried to contact him.
MrBoostedCRX
02-06-2009, 12:27 PM
very nice video bro, you know i envy your car :goodjob:
and the numbers are great!!!
SmackedInATL
02-06-2009, 04:37 PM
I talked to someone else and they said the car takes so long to pull 4th gear because of the load the Mustang Dyno put on the car, which means it is more accurate to what it put down on the street.
03CobraAV8R
02-07-2009, 11:38 AM
Good numbers man! Look forward to seeing it run at the track again.
Maybe I'll get mine back in the next month, damn, why can't they just take a day to put the engine in and tune it - the engine's been ready to go for a few weeks now! :(
Hunter02SS
02-07-2009, 12:18 PM
Car was definitely tuned with a xcal3 handheld. He was in 4th gear and pulled from 50-55 mph to 140 or so. That's where 4th ends. It was at WOT. 4th gear will pull very long from 55 mph.
Only when u are making 450rwhp. Here is how long it takes when making over 900rwhp!!!
<embed src="http://www.atlpf.com/FlowPlayerBlack.swf?config=%7Bembedded%3Atrue%2Cba seURL%3A%27http%3A%2F%2Fwww%2Eatlpf%2Ecom%27%2Cpla yList%3A%5B%7Burl%3A%27hunter02ssdynopic%2Ejpg%27% 7D%2C%7Burl%3A%27hunter02ssdyno%2Eflv%27%7D%2C%7Bu rl%3A%27hunter02ssdynopic%2Ejpg%27%7D%5D%2CshowPla yListButtons%3Afalse%2CshowLoopButton%3Afalse%2Cin itialScale%3A%27scale%27%2Cloop%3Atrue%2CautoPlay% 3Atrue%7D" width="740" height="503" scale="noscale" bgcolor="111111" type="application/x-shockwave-flash" allowScriptAccess="always" allowNetworking="all" pluginspage="
SmackedInATL
02-07-2009, 03:11 PM
Only when u are making 450rwhp. Here is how long it takes when making over 900rwhp!!!
<embed src="http://www.atlpf.com/FlowPlayerBlack.swf?config=%7Bembedded%3Atrue%2Cba seURL%3A%27http%3A%2F%2Fwww%2Eatlpf%2Ecom%27%2Cpla yList%3A%5B%7Burl%3A%27hunter02ssdynopic%2Ejpg%27% 7D%2C%7Burl%3A%27hunter02ssdyno%2Eflv%27%7D%2C%7Bu rl%3A%27hunter02ssdynopic%2Ejpg%27%7D%5D%2CshowPla yListButtons%3Afalse%2CshowLoopButton%3Afalse%2Cin itialScale%3A%27scale%27%2Cloop%3Atrue%2CautoPlay% 3Atrue%7D" width="740" height="503" scale="noscale" bgcolor="111111" type="application/x-shockwave-flash" allowScriptAccess="always" allowNetworking="all" pluginspage="
Embed fail Hunter. Try again, I want to see. Just link it like on MCE.
Echonova
02-07-2009, 07:19 PM
Noice.
quicksix
02-08-2009, 01:43 PM
\Car sounds good and good numbers :goodjob:
We will see what a pulley will do for the L
GGPIS3
02-08-2009, 02:39 PM
Only when u are making 450rwhp. Here is how long it takes when making over 900rwhp!!!
<embed src="http://www.atlpf.com/FlowPlayerBlack.swf?config=%7Bembedded%3Atrue%2Cba seURL%3A%27http%3A%2F%2Fwww%2Eatlpf%2Ecom%27%2Cpla yList%3A%5B%7Burl%3A%27hunter02ssdynopic%2Ejpg%27% 7D%2C%7Burl%3A%27hunter02ssdyno%2Eflv%27%7D%2C%7Bu rl%3A%27hunter02ssdynopic%2Ejpg%27%7D%5D%2CshowPla yListButtons%3Afalse%2CshowLoopButton%3Afalse%2Cin itialScale%3A%27scale%27%2Cloop%3Atrue%2CautoPlay% 3Atrue%7D" width="740" height="503" scale="noscale" bgcolor="111111" type="application/x-shockwave-flash" allowScriptAccess="always" allowNetworking="all" pluginspage="
That was on a Mustang dyno? Looked like a Dynojet?
Hunter02SS
02-08-2009, 06:56 PM
That was on a Mustang dyno? Looked like a Dynojet?
Mine was on a dyno jet. (DynoLab in Marietta).
collins
02-08-2009, 08:06 PM
That was on a Mustang dyno? Looked like a Dynojet? i think hunter was more or less cracking a joke lol
Just_CHill
02-08-2009, 08:41 PM
Nice.
SiKsTanG16
02-17-2009, 09:39 PM
bad ass cobra dude... im jealous
wow crazy........thacker i meant smackedinatl isnt acting a fool in this thread. amazing. but good numbers none the less
Powered by vBulletin® Version 4.2.2 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.