View Full Version : CV AXLES FOR AN H22 EG CIVIC????
LongLiveH2b
02-02-2009, 10:56 PM
are these any good on ebay or is there another way to get this thing to fit right
car is a 94 civic coupe with a jdm h22 and is having axle problems, what should i do, i believe it has 90-93 passenger axle and it is a little too short and it causes vibration
http://cgi.ebay.com/ebaymotors/_Car-Truck-Parts-Accessories__CV-axles-92-93-94-95-civic-EG-into-H22-swap_W0QQitemZ250360238791QQadiZ2865QQadnZCarQ20Q2 6Q20TruckQ20PartsQ20Q26Q20AccessoriesQQcmdZViewIte mQQptZMotors_Car_Truck_Parts_Accessories?_trksid=p 4506.m20.l1116
Tech5
02-02-2009, 11:01 PM
NO
They are cheap unless its a daily and your not going to push it, and run the car hard!
BUT a good friend of mine broke these same ones 3 times, then he went an got some 300HP rated axles from a place in New york that gives a lifetime warranty on them but cost 150 each ...You pay for what you get man, cheap parts = costly at the end
one of the times it broke in the tranny costing him to buy a whole tranny!
LongLiveH2b
02-02-2009, 11:04 PM
oh damn i dont want that to happen, but what about the 400hp rated ones??
http://cgi.ebay.com/ebaymotors/400hp-EG-cv-axles-shaft-92-93-94-civic-into-H22-non-ab_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205Q7c66Q3a2Q 7c65Q3a12Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a1Q7c293Q3a 1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem2 50367516574QQitemZ250367516574QQptZMotorsQ5fCarQ5f TruckQ5fPartsQ5fAccessories#ebayphotohosting
NO
They are cheap unless its a daily and your not going to push it, and run the car hard!
BUT a good friend of mine broke these same ones 3 times, then he went an got some 300HP rated axles from a place in New york that gives a lifetime warranty on them but cost 150 each ...You pay for what you get man, cheap parts = costly at the end
one of the times it broke in the tranny costing him to buy a whole tranny!
Tech5
02-02-2009, 11:06 PM
Still cheap man, look at that guys feedback an read what others said about them, they caused really bad vibrations,and are cheap made!!!
get a Known axle man, that is one item you dont want cheap, can cost you tons more, and leave you on the side of the road!!
LongLiveH2b
02-02-2009, 11:08 PM
so which one or brand do you reccommend? currently it has the 90-93 teg axles and the driver side is ok, just the pass. side has vibration, they say that the pass. side is 1/8inch shorter so it gets all loose and shit down there
LongLiveH2b
02-02-2009, 11:35 PM
????
Sir_Christopher
02-03-2009, 01:05 AM
contact raxles. thats who i got my h22 axles for my ef!!! there amazing and not cheap!!
Barefoot
02-03-2009, 08:42 AM
http://www.gatorracingaxles.com/
MR.EM1
02-03-2009, 11:58 AM
hasport
eYezs1ck
02-03-2009, 12:06 PM
you can customize DA axles as well
Tech5
02-03-2009, 12:52 PM
I use hasport, an DSS and they are hard to choose which is best like them both!
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.