Dastun 510 with a ??QUE¿¿

[DUBSf22c]

http://www.youtube.com/watch?v=kl75pIjbOL0

http://img227.imageshack.us/img227/3825/carfrontun8.jpg

http://img522.imageshack.us/img522/6831/cardsiderl1.jpg

http://img522.imageshack.us/img522/2701/wheelfrontko6.jpg


http://img522.imageshack.us/img522/717/dashkj5.jpg



http://img227.imageshack.us/img227/4624/carintseatssc1.jpg


http://img392.imageshack.us/img392/7009/engbaynk5.jpg




http://img522.imageshack.us/img522/3013/axlespto8.jpg





http://img514.imageshack.us/img514/1568/fuelsyses1.jpg




Engine:
VQ35DE from a 2006 G35 (same engine as the 287hp 350z engine)
6 Spd transmission (http://forums.nasioc.com/forums/showthread.php?t=1682023#) (CD008)
Vqswap shifter relocator (moves the shifter 4” forward, where it needs to be)
Custom Engine Mount brackets (uses stock rubber mounts, the engine is amazingly completely motionless under load, no twisting)
XTD Chromoly lightweight Flywheel
OEM clutch & pressure plate
Braided Stainless Steel clutch line
Modified Intake manifold/Upper plenum to have a larger neck & support a Performance Products 85mm Throttle-body (stock is 70mm) 4” intake piping
AEM EMS tuned
AAM Angled Plenum Spacer (good for 5-10hp)
Rewired with a 240sx fuse box
Reversed front crossmember
Relocated Battery (behind passenger seathttp://images.intellitxt.com/ast/adTypes/2a.gif (http://forums.nasioc.com/forums/showthread.php?t=1682023#))

Fuel (http://forums.nasioc.com/forums/showthread.php?t=1682023#) System:
RCI 15 gallon Fuel Cell
Custom Surge Tank
Walbro 240lph high pressure pump
Mallory 90gph low pressure pump
8AN fuel filters
8AN & 6AN stainless steel braided Fuel lines with Earls, Russel, & Aeroquip fittings
Injected Performance Fuel Rails
SX adjustable fuel pressure regulator with pressure gauge

Cooling:
Oil Cooler with Greddy Sandwich Adapter with thermostat
Steel Braided 10an oil lines
Afco Sirrocco style dual pass aluminum radiator

Exhaust:
Modified OEM exhaust manifolds (all stainless steel)
2 1/4” stainless piping to 3” aluminized steel pipe
3” resonator & 3” Magnaflow muffler (no catalytic converters)
The car sounds great, with the definitive VQ exhaust note

Drivetrain:
Custom Driveshaft (good for 500 whp)
3.7 ratio R200 Differential with Z32 finned cover & new bearings
MadDat R200 conversion Mustache bar
OBX Helical LSD (the LSD design faults & weaknesses have been fixed)
Shortened Z31 Turbo CV axles (also very strong)
Modern Motorpsorts Billet Companion Flanges
280z Stub Axles (known for strength) new bearings as well

Interior:
F1-spec Mugen Style Fiberglass seats
Custom carbon fiber dash with Autometer gauges
Tach & Speedometer are Ultra-lite series
The remaining are Lunar series (fuel level, oil pressure, water temp, voltage)
AEM wideband sensor with gauge
RCI seat harnesses
Door panels & rear seats are in good shape (though not perfect)
Headliner is in awesome shape compared to the typical 510
Dash Pad is near perfect (replaced it recently)
Momo Steering wheel hub
Sprint racing steering wheel (I may replace this with a Sparco)

Exterior:
Advan SA3R wheels, 16x7’s up front with 16x8’s In the rear
BF Goodrich G-Force KDW T/A tires (nearly new) 205front, 225rear
Hella/BMW headlight conversion with relays
Hood shocks
Carbon Fiber rear view mirrors

Suspension/Steering:
Koni Yellow’s in the rear with Ground Control Springs (approx. 950lbs.)
Koni Red’s in front with 325lb Ground Control Springs, spare 275lb set
200sx V6 front struts
Techno Toy Tuning tension rods
Penultimate Rear crossmember
Cusco Camber Plates
Bumpsteer Spacers
Techno Toy Tuning Spring perches with bearings up front
Modified Rear LCA’s for added rear wheel clearance
Custom Rack & pinion steering rack using a BMW manual rack (very nice/tight steering feel with no noticeable bump steer)
Rolled fenders with a professional rolling tool
Front Sway Bar (this is one thing that can/should be replaced with an aftermarket one designed to go in front of the oil pan)

Brakes:
Z32 4 piston Calipers in front with 11.5” vented rotor
Z32 2 piston Calipers in rear
Most of the Brake hardlines are new
Stainless steel braided flexible lines
Wilwood brake bias adjuster (in cabin)
280zx 15/16 Brake Master Cylinder

Security:
Python Pager Car Alarm
JDM Removable Steering Wheel hub


EXTRAS:
2 heads from a “Rev-Up” VQ35DE (1mm more lift on the cams & stiffer valve springs)
Front Bumper
Spare BMW/Hella headlights
Spare BMW manual steering rack
Replacement ignition switch & spare key blank
Royal Purple Trans fluid (enough for oil change)
Spare bolts & parts from the engine
Handbrake, cables, & Wilwood spot calipers (for E-brake conversion)
Spare C pillar vents
15" Wheels with worn tires
Additional spare parts that your typical 510 owner has

[Elbow]

That's bad ass.

[Z33_kid]

i saw it for sale

[Dirty Octopus™]

where are the bay shots? :thinking:

[DinanM3atl]

I would drive it.

[alpine_aw11]

God those rims are fucking ugly. I don't give a shit who makes them or where they're made.

[jimmycricket]

God those rims are fucking sexy. I give a shit who makes them and where they're made.

[SiRed94]

They should've gone with the Blue/Black Sa3r's would've matched the steering wheel. Lol I bet that thing comes out of the hole pretty good.

[G.C]

Not feeling the wheels. But dam it must be pulling.

[GSRteg®]

Old school

[rbwdriven]

I'd change the wheels to a clean set of panasports and be done.

[imbatman]

is it me, or the key ignition is on the left side

[speedminded]

How the fuck can you post a thread with that title and not show a picture of the engine swap? :slap:

[Stormhammer]

It's kind of ugly. I dunno, for some reason I just wasn't impressed.

[LeX]

yeah i saw it for sale... rims ruin it

[DUBSf22c]

How the fuck can you post a thread with that title and not show a picture of the engine swap? :slap:

Iposted but it isnt showing up .. damnit

[DUBSf22c]

ok pics in

[.gauge.]

I'd rock the shit out of that car.

[Le_Stat]

damn man sweet ride

[Sentra]

Duhhh..
NICE CAR!

[kenrtx]

It's kind of ugly. I dunno, for some reason I just wasn't impressed.

Of course it wouldn't. You only understand what Super Street magazine tells you. If you did 0.1% research as you do posting 2500 posts per day on each forum you'd understand that Datsun 510's are highly desired due to their emission exceptions. They basically can do what they want in high emission regulated counties like Los Angeles county.

But then again you're a guy who posts pictures of images.google.com cars claiming they're yours on other forums, so it's no surprise. :)

:cool:

The car is awesome.

[jcbe34]

Honestly.. I love 510's and this one looks to be butchered. It would be a cool swap but it was just poorly executed

[DUBSf22c]

Honestly.. I love 510's and this one looks to be butchered. It would be a cool swap but it was just poorly executed

I think your not quite looking at it as "Just needs exterior(form) work, now that function is done" maybe

[jcbe34]

I think your not quite looking at it as "Just needs exterior(form) work, now that function is done" maybe

Haha maybe so.. But I think the engine bay could be much nicer than it is.. :cry: @ the weld on the intake. It's a cool car either way, it could just use some "refinement" in my opinion

[Brian*]

BEAST!

[Deke]

Of course it wouldn't. You only understand what Super Street magazine tells you. If you did 0.1% research as you do posting 2500 posts per day on each forum you'd understand that Datsun 510's are highly desired due to their emission exceptions. They basically can do what they want in high emission regulated counties like Los Angeles county.

But then again you're a guy who posts pictures of images.google.com cars claiming they're yours on other forums, so it's no surprise. :)

:cool:

The car is awesome.

Well I feel compelled to defend him. He's entitled to his opinions as much as you are yours, but to start by throwing "insults" attacking his car knowledge is quite the dick bag way to go about it.

And what's this about posting stuff in another forum? Are you stalking the guy?

[Sammich]

those wheels absolutely kill it

[Big D]

ahh pretty much my 3rd favorite car ever made, the first is naturally the s14 zenki, the 2nd is a 71 skyline :crazy: and of course the 3rd is the Datsun 510, either way that car is b-e-a-utiful ......................Big D :bump:

[DUBSf22c]

"refinement"

exactly.. needs some of my touch and taste :D

[rmeyer114]

love them 510s man all she needs is a grille and a paint job other than that props to ya

[Autofab]

Love the 510 keep up the hard work! Keep us all posted with your progress. Cant wait to see it out on the road!

[kenrtx]

Well I feel compelled to defend him. He's entitled to his opinions as much as you are yours, but to start by throwing "insults" attacking his car knowledge is quite the dick bag way to go about it.

And what's this about posting stuff in another forum? Are you stalking the guy?

Awww how heroic. His knight and shining armor, are you his mommy? Yoshi is that you? Hmmm. Stalking? I didn't have to look hard when people are linking his moronic posts with his signature from a forums that he'd be laughed off of for his pathetic fish stories.

With that said I will differ to your logic. I am entitled to my opinion that he's a failure. :)

[Deke]

Awww how heroic. His knight and shining armor, are you his mommy? Yoshi is that you? Hmmm. Stalking? I didn't have to look hard when people are linking his moronic posts with his signature from a forums that he'd be laughed off of for his pathetic fish stories.

With that said I will differ to your logic. I am entitled to my opinion that he's a failure. :)

I don't even know him. From my limited forum interaction with him, he just always seemed like a decent guy. So when some random with 2 posts comes here seemingly specifically to attack him, I was just a little put-off by it.

Start your own thread about him being a failure in the off-topic if you actually want to get some kind of point across. Quoting insignificant posts of his buried in random threads is doing nothing for your cause.

[kenrtx]

I don't even know him. From my limited forum interaction with him, he just always seemed like a decent guy. So when some random with 2 posts comes here seemingly specifically to attack him, I was just a little put-off by it.

Start your own thread about him being a failure in the off-topic if you actually want to get some kind of point across. Quoting insignificant posts of his buried in random threads is doing nothing for your cause.

There is no agenda here. Quit over thinking this, you'll hurt yourself. :rolleyes: