CodyW
01-27-2009, 09:41 AM
Ok, still have a few things from my S14 that I'm looking to get rid of. Shell is gone so please don't PM me with "I need..." messages, most everything is gone.
Here are some of the things I still have left though. I'll try to snap pics of the rest of the stuff in the next day or so.
Garrett GT2871R (0.64AR) Turbo w/Megan Tubular Manifold for SR: $700 (Turbo is approx 2.5 years old but has maybe 3-4k miles on it, car wasn't driven very often at all. Also, the manifold/turbo have spot welds on 2 of the bolts on the flange as loosening bolts were always a problem with this setup, but they can be cut apart if needed)
http://codywellons.com/photos/2008.12.06/content/bin/images/large/_MG_4212.jpg
GReddy Intake Plenum: $400 (real, not ebay knock-off)
http://codywellons.com/photos/2008.12.06/content/bin/images/large/_MG_4221.jpg
GReddy style FMIC: $100 (just intercooler, no pipes)
http://codywellons.com/photos/2008.12.06/content/bin/images/large/_MG_4237.jpg
550cc Injectors on a JGY Customs Fuel Rail: $250
http://codywellons.com/photos/2008.12.06/content/bin/images/large/_MG_4246.jpg
ProjectNissan Engine Torque Dampner: $60
http://codywellons.com/photos/2008.12.06/content/bin/images/large/_MG_4252.jpg
Dual Gauge Pod: $20 (no gauges included for this price)
http://codywellons.com/photos/2008.12.06/content/bin/images/large/_MG_4157.jpg
VDO Boost Gauge: $30
(seen in above picture)
S14 Zenki Headlights and Corner Lenses: $150 (fairly good condition overall, 1 corner lens is brand new - see pic below)
http://s3mag.com/blog/wp-content/uploads/2008/06/_mg_1083.jpg
S14 Zenki Front Lip: $30 (could use painting, see pic above)
S14 Glovebox: $30
Tanabe Rear Swaybar for S14: $100
S14 Driveshaft: $50 (belive this may actually be from a Skyline, not sure...fit fine on my S14 though)
Let me know if anyone is interested in any of this stuff, all of these items are off the car and ready to go. I'm in Duluth by the way and can meet up just about any time during the day.
Here are some of the things I still have left though. I'll try to snap pics of the rest of the stuff in the next day or so.
Garrett GT2871R (0.64AR) Turbo w/Megan Tubular Manifold for SR: $700 (Turbo is approx 2.5 years old but has maybe 3-4k miles on it, car wasn't driven very often at all. Also, the manifold/turbo have spot welds on 2 of the bolts on the flange as loosening bolts were always a problem with this setup, but they can be cut apart if needed)
http://codywellons.com/photos/2008.12.06/content/bin/images/large/_MG_4212.jpg
GReddy Intake Plenum: $400 (real, not ebay knock-off)
http://codywellons.com/photos/2008.12.06/content/bin/images/large/_MG_4221.jpg
GReddy style FMIC: $100 (just intercooler, no pipes)
http://codywellons.com/photos/2008.12.06/content/bin/images/large/_MG_4237.jpg
550cc Injectors on a JGY Customs Fuel Rail: $250
http://codywellons.com/photos/2008.12.06/content/bin/images/large/_MG_4246.jpg
ProjectNissan Engine Torque Dampner: $60
http://codywellons.com/photos/2008.12.06/content/bin/images/large/_MG_4252.jpg
Dual Gauge Pod: $20 (no gauges included for this price)
http://codywellons.com/photos/2008.12.06/content/bin/images/large/_MG_4157.jpg
VDO Boost Gauge: $30
(seen in above picture)
S14 Zenki Headlights and Corner Lenses: $150 (fairly good condition overall, 1 corner lens is brand new - see pic below)
http://s3mag.com/blog/wp-content/uploads/2008/06/_mg_1083.jpg
S14 Zenki Front Lip: $30 (could use painting, see pic above)
S14 Glovebox: $30
Tanabe Rear Swaybar for S14: $100
S14 Driveshaft: $50 (belive this may actually be from a Skyline, not sure...fit fine on my S14 though)
Let me know if anyone is interested in any of this stuff, all of these items are off the car and ready to go. I'm in Duluth by the way and can meet up just about any time during the day.