Log in

View Full Version : Handling Mods Who local can redrill wheels???


pebojelly
01-26-2009, 07:08 AM
I am searching for a local machine shop with experience in drilling wheels.

I have a set of BBS RS mesh I want them to be 4x100 as they are 4x114.3 now.


If anyone has dealt with someone post there info and turn around time.


Thanks in advance.
pebojelly
01-26-2009, 09:29 AM
Does anyone have a 4x114.3 adapter from a 4x100?

I could bolt it to the wheel and use it as a guide.

I only need to borrow one and would pay a few dollars for your time.
K24cb7coupe
01-26-2009, 07:34 PM
there should be holes for 4x114.3 already drilled. you should only have widen them...
phoenixx1
02-11-2009, 07:38 PM
there is a bbs location up here by me, its actually right down the street from road atlanta, they might do it for you since they manufactured the wheels
Saung
02-11-2009, 08:04 PM
Wheel Wizard in Chamblee. Look for them in the Yellowpage. Good luck.
speedminded
02-11-2009, 08:11 PM
I am searching for a local machine shop with experience in drilling wheels.

I have a set of BBS RS mesh I want them to be 4x100 as they are 4x114.3 now.


If anyone has dealt with someone post there info and turn around time.


Thanks in advance.http://www.bigchrome.com/ Stone Mountain



Does anyone have a 4x114.3 adapter from a 4x100?

I could bolt it to the wheel and use it as a guide.

I only need to borrow one and would pay a few dollars for your time.It'll probably stick out too much with a conversion adapter.



there should be holes for 4x114.3 already drilled. you should only have widen them...wha?



there is a bbs location up here by me, its actually right down the street from road atlanta, they might do it for you since they manufactured the wheelslol, no.



Wheel Wizard in Chamblee. Look for them in the Yellowpage. Good luck.Re-drilling is not listed on their site as a service. www.wheelwizard.com
NoWAyItZTOMmY
09-25-2009, 06:42 PM
bump for other suggestions
RiceBoy
11-05-2009, 08:43 AM
You 2 should get together. :D

http://www.importatlanta.com/forums/showthread.php?t=243107
mikesEK
11-20-2009, 05:11 AM
Re-drilling is not listed on their site as a service. www.wheelwizard.com

but they do it....or call my guy Kevin 678-570-7646