WTF are these rims?

[Catnip]

Just picked a set of these up, any idea what they are? I only have a pic of one of the rims at the moment.

http://i55.photobucket.com/albums/g146/84_318i/DSC00230-1.jpg

http://i55.photobucket.com/albums/g146/84_318i/DSC00231-2.jpg

[Humphrizzle]

wheelspecs.com

what's the centercap look like?


from what i see, bbs RS

or some BMW 7 series wheels

[Catnip]

wheelspecs.com

what's the centercap look like?


from what i see, bbs RS

or some BMW 7 series wheels

No centercaps with the wheels, also no idea what size they are. Where do I measure to get a proper reading?

[IMPORTchic]

ewww...? lol

[Catnip]

ewww...? lol

I paid $30 for them ;)

[IMPORTchic]

Welllll in that case then you are gooood! lol

Soo....I get to seeeee tomm?!
Buwahahaha!

[Catnip]

Welllll in that case then you are gooood! lol

Soo....I get to seeeee tomm?!
Buwahahaha!

Yes!
and the broken integra :(
lolol

[IMPORTchic]

Yes!
and the broken integra :(
lolol

Yayyyy!!!! :D

[Humphrizzle]

just get a tape measure and measure across the face lip to lip.

then measure the barrell to measure width.

why do you have them? you have hondas and those are 5 lug universals.. haha.

[Catnip]

just get a tape measure and measure across the face lip to lip.

then measure the barrell to measure width.

why do you have them? you have hondas and those are 5 lug universals.. haha.

The rims on my camaro aren't mine, so I'd hate to be without wheels when the guy comes to pick them up (paid for them months ago and has yet to pick them up)... lol

[Catnip]

Just measured, they're 16x8

[TheGrillMan]

16x8 hrmmm

ima say bba rs also

[toxxxic]

I wanna say they're ultras.

those are the same wheels that were on geoff's accord.

I WANTED THEM SO BAD. give me!

[speedminded]

I've never seen a universal lug BBS wheel, it would have a BBS stamp as well, and I don't recall any requiring a screw for the center cap...

[Catnip]

I wanna say they're ultras.

those are the same wheels that were on geoff's accord.

I WANTED THEM SO BAD. give me!


Del Sols are 4 lug :bootyshak

lol

[toxxxic]

they're def not bbs.

i'm in the process of finding out :ninja:

[toxxxic]

Del Sols are 4 lug :bootyshak

lol

nothing is permanent. lol

civics with jdm integra type r wheels also started out 4 lug ;)

[Catnip]

nothing is permanent. lol

civics with jdm integra type r wheels also started out 4 lug ;)

Touche :cheers:

All they have printed are the load ratings and "Made in USA"

[toxxxic]

i asked geoff once & i coulda sworn he said they were ultras. BUT judging by ultras website, either they aren't ultras or they're really old.

[speedminded]

Compomotive CXN wheels?

http://www.usacomp.com/cxn.htm

http://img.photobucket.com/albums/v285/looperboy81/2005_0812Image0185.jpg

If so you got a deal of the century. :screwy:

[toxxxic]

^ that's def the wheel but it looks like they're a knockoff judging by the universal lugs.

[Catnip]

The angles of the lip changes aren't right to be compomotives.

[speedminded]

The angles of the lip changes aren't right to be compomotives.It's a 3 piece wheel right?

[Catnip]

It's a 3 piece wheel right?

It has the bolts and a small space between the "barrel" and center, but on the back it has small beads spaced out between the pieces. Not sure...? I'm not big on wheels :thinking:

They're really light though... if that helps, lol

[speedminded]

It has the bolts and a small space between the "barrel" and center, but on the back it has small beads spaced out between the pieces. Not sure...? I'm not big on wheels :thinking:

They're really light though... if that helps, lolCan you take a pic of the side...i'm trying to figure out if the center is bolted between the barrel and a lip or is it a 2-piece wheel with just a center and barrel.

[Catnip]

Can you take a pic of the side...i'm trying to figure out if the center is bolted between the barrel and a lip or is it a 2-piece wheel with just a center and barrel.


Sure, it might be a while for a reply, I'll wipe them down first.

[Catnip]

http://i55.photobucket.com/albums/g146/84_318i/DSC00232-1.jpg

http://i55.photobucket.com/albums/g146/84_318i/DSC00233-1.jpg

http://i55.photobucket.com/albums/g146/84_318i/DSC00234-1.jpg

http://i55.photobucket.com/albums/g146/84_318i/DSC00235-1.jpg

http://i55.photobucket.com/albums/g146/84_318i/DSC00236-1.jpg

No light so I had to bring them inside... therefore I couldn't clean them. Also didn't know what you needed, so I took a few, lol.

[speedminded]

ohhhh, it's a one piece wheel lol. crazy!

[Catnip]

ohhhh, it's a one piece wheel lol. crazy!


iknorite :(
lol

[speedminded]

American Racing?

http://i262.photobucket.com/albums/ii115/TmnVwcam/l_c27487b63135ab15addbfd288a5fda45.jpg

[Humphrizzle]

i think they're ARE's..

figured they weren't BBS RS. couldnt be sure though.

[Catnip]

makes sense as to why they say made in USA

So where can I info on these? They're not listed on wheelspecs.com


**edit.. lol

[IMPORTchic]

FAIL Evan. lol You dont know the difference b/t a one piece + wheel?!

Tisk tisk! haha jk;)

I mean heyy....as long as they serve the purpose for the marrrrooo for now then what does it matter? I mean $30......ehhh...atleast it wasnt $100.:rolleyes:

[Catnip]

FAIL Evan. lol You dont know the difference b/t a one piece + wheel?!

Tisk tisk! haha jk;)

I mean heyy....as long as they serve the purpose for the marrrrooo for now then what does it matter? I mean $30......ehhh...atleast it wasnt $100.:rolleyes:


lol. you're asking for it. ;)

[Sammich]

DUDE...SEND EM MY WAY..I WANT THOSE BBS' FOR MY TRUCK

[EuroTra$h]

72 corollas came out with some wheels like theses stock

[DeeAOne]

man what the hell. i wanted these and he told me $80.


and yes the little rivets are some sort of plastic. if you try to take them out the majority will just snap.

[Sammich]

man what the hell. i wanted these and he told me $80.



looks like he flipped the price:ninja:

man i'm going to hell:lmfao: :lmfao: :lmfao:

[SampaGuy]

Definitely not BBS RSs. I used to have a set and there were tiny engravements of the letters BBS on the back, also on everyone of the 40+ nuts on the outer rim. The system to screw on the centercaps is also very different.

Found these on google:

http://i264.photobucket.com/albums/ii161/e304lyfe/DSC00658.jpg
http://i264.photobucket.com/albums/ii161/e304lyfe/DSC00649.jpg

[DeeAOne]

looks like he flipped the price:ninja:

man i'm going to hell:lmfao: :lmfao: :lmfao::2up:lol.

[Sammich]

:2up:lol.

:lmfao: :lmfao: :lmfao: :lmfao: :lmfao: :lmfao: :lmfao: :lmfao:

one love kid

[TTNSX]

BBS RS's have a screw on centercap, those have a raised part for a bolt to hold on the center cap. I had some RS's from an infiniti that said "made in Japan for BBS"

[Dirty Octopus™]

Compomotives or Ultra's. but im leaning more toward Ultras.

even if they were BBS' (which they arent) they'd be closer to the RM. calling them RS' is a spit in the face.

[Catnip]

Compomotives or Ultra's. but im leaning more toward Ultras.

even if they were BBS' (which they arent) they'd be closer to the RM. calling them RS' is a spit in the face.


ARE's ;)

Domestic shit right here!

[IMPORTchic]

ARE's ;)

Domestic shit right here!

Domestic FTL.

Import is where its atttt! LOL


Buttt wait....the maarrrrooo is domestic if thats what you were thinking about putting them on for now. So its allll gravy! ;)

[NOCLUE]

NOCLUE but there pretty Sweet and you said there light so big ups 2 you man :goodjob: